Displaying 20 results from an estimated 800 matches similar to: "help me...."
2023 Oct 28
1
My Back-UPS RS 1000 went haywire, any ideas?
Is the battery old? PbAc ones usually last for 2-3 years and then degrade.
Should be a field-replaceable part.
Some 20 years ago I had an APC BackUPS become a glorified power strip every
few years, so when the wall power disappeared - load went down immediately.
It was also beeping about battery replacement (but in the closet, was not
often noticed quickly). This is also a way for you to check if
2006 May 23
1
Nut issue or MGE issue?
Hi,
I took the advice of Daniel O'Connor, found out what variables I
had available to me, and put them in the conf. So now it looks like :
[ellipse]
driver = mge-shut
port = /dev/cuaa0
desc = "UPS"
lowbatt = 5
offdelay = 120
let the UPS charge up fully, 24 hours.
I plugged a single lamp into it, with a 60W bulb.
At 3:40p
2005 Sep 05
4
Dummy variables model
Hi, all!
Anyone know an easy way to specify the following model.
Panel dataset, with stock through time, by firm.
I want to run a model of y on a bunch of explanatory variables, and one
dummy for each firm, which is 1 for observations that come from firm i,
and 0 everywhere else. I have over 200 firms (and a factor variable that
contains a firm identifier).
Any easy way of going about
2005 Feb 06
5
Rails on FreeBSD or OSX
Hello everyone-
I was just reading the article on Rails at O''Reilly and one of those
little light bulbs over my head went off - what a GREAT tool.
I tried to install both Ruby on my Mac PowerBook without much luck and
then tried to install Ruby and Rails on a FreeBSD server I have. I am
running into some odd errors - so, my question is - can you point me to
some tech resources
2006 Jan 19
3
Processor Size
Can someone give me an idea of the processor power I will need for 1 x
TDM240 with 2xquad FXO's and 8 sip phones/ATA's on a quite 100Mbit LAN.
The machine we have available of hand is a P4 1GHz with 768MB RAM.
Tx
Marnus van Niekerk
--
"Opportunity is missed by most people because it is
dressed in overalls and looks like work."
Thomas Alva Edison - Inventor of 1093
2019 Jan 04
2
My 1973 VW Karmann Ghia
I crashed my car and need the entire turn indicator assembly. Drivers side.
Can anybody help. No local retailers have it. I did get a wiring tube but
still need the seal, bulb holder and gasket.
Thank you,
Susan
--
Susan Slayter King
(949) 391-0914
2019 Jan 07
3
My 1973 VW Karmann Ghia
Or at least post your smb.conf, we tend to base our diagnosis on it.
On 07.01.2019 11:01, Sven Schwedas via samba wrote:
> It might actually, Karmann-Ghia, Beetle and Samba all shared the same
> engine blocks, from what I recall.
>
> …it's probably still better to ask a car mechanic.
>
> On 04.01.19 23:04, A. James Lewis via samba wrote:
>> I wonder if it's the
2019 Jan 04
3
My 1973 VW Karmann Ghia
I wonder if it's the same part as used on the VW Samba!
J
On 04/01/2019 21:55, Steven Hirsch via samba wrote:
> On Fri, 4 Jan 2019, Susan Slayter King via samba wrote:
>
>> I crashed my car and need the entire turn indicator assembly. Drivers
>> side.
>> Can anybody help. No local retailers have it. I did get a wiring tube
>> but
>> still need the seal,
2015 Dec 28
3
Server not shutting down before power loss
Hi I hope someone can please help.
I have an Ubuntu Server running 14.04.3 LTS and using an APC ES550 UPS
connected via USB.
I've installed Nut and can see it does monitor the UPS correctly and give
the correct stats with battery percentage etc.
But on doing a "real" test and unplugging the UPS from the power supply,
after watching the battery drop slowly suddenly the server just
2015 Dec 29
0
Server not shutting down before power loss
> Hi I hope someone can please help.
>
> I have an Ubuntu Server running 14.04.3 LTS and using an APC ES550 UPS
> connected via USB.
>
> I've installed Nut and can see it does monitor the UPS correctly and give
> the correct stats with battery percentage etc.
>
> But on doing a "real" test and unplugging the UPS from the power supply,
> after watching
2012 Mar 22
4
read.zoo - combining two columns with date and time respectively into one index column?
I have three columns in my raw data: date, time, and dry bulb temperature:
http://r.789695.n4.nabble.com/file/n4495326/weathDataSDCoron.txt
weathDataSDCoron.txt
The date format is %Y%m%d and the time format is %H:%M. Any ideas on how to
read it in such that it looks at the first two columns and then merges it
into one column combining both the date and time?
--
View this message in context:
2006 Nov 28
2
Symbian Softphone
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Helvetica, Arial, sans-serif">Anybody know of a SIP/IAX
2006 Dec 06
1
Ping
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Helvetica, Arial, sans-serif">Sorry to do this but I sent a
couple of posts and I do not
2006 Mar 30
1
GLX Problem
Hello,
after a fresh install on and amd64, nvidia, linux 2.6.16, i get this
error after starting wine:
bowman@discovery ~ $ winecfg
wine: creating configuration directory '/home/bowman/.wine'...
X Error of failed request: BadAlloc (insufficient resources for
operation) Major opcode of failed request: 144 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Serial number
2020 Aug 19
2
Device recommendation Salicru
On 8/19/20 12:55 PM, Marc Franquesa wrote:
> Thanks all for the quick responses on the question (always a good sign
> of this mailing list).
>
> (Tim Dawson, Manuel Wolfshant):
> Regarding root cause of my current problem pointing to a faulty
> battery, this is not the first time that someone points to it. However
> I made a simple test with the vendor tools (Windows) and
2018 Dec 02
1
MGE EllipseMAX 1500 shuts down after a few hours
On December 2, 2018 7:29:38 PM GMT+02:00, raul <raulvior.bcn at gmail.com> wrote:
>I have restored original configuration and enabled the ignorelb flag. I
>
>didn't point out in the original e-mail that after every poweroff the
>battery percentage is reported at 40% instead of 100% and charges
>slowly again to 100%. Maybe the UPS sends a LB event and shuts down
2016 Oct 26
2
Questions about Eaton 5E 1, 100W 2, 200VA 6-Outlet UPS
On Oct 25, 2016, at 8:08 PM, Michael Evans wrote:
>
> It seems that the UPS I bought is actually served by the blazer_usb driver.
>
> USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA)
>
> It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS
>
> SKU: 147140 Mfr
2006 Nov 20
2
Recording g729
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<font face="Helvetica, Arial, sans-serif">Before ordering I want to be
2007 Apr 12
1
zoo merge() method
R users:
I'd like to get some insight on an error I encounter when attempting to
work with two moderately sized sets of time series data. FYI - I'm
using the following versions of R and supporting packages on a Windows
2000 OS:
- R version 2.4.1 (2006-12-18)
- zoo version 1.2-2
- chron version 2.3-10
The two time series I'm working with are from the summer of 2004 and
are:
1.)
2013 May 01
3
Chron format question h:m not working
R 2.12.2 on Scientific Linux 6.4
#works
chron(times.="15:00:00", format=c(times="h:m:s"))
#doesn't work
chron(times.="15:00", format=c(times="h:m"))
From chron Manual:
The times format can be any permutation of "h", "m", and "s" separated
by any one non-special character. The default is "h:m:s".
what am I