similar to: i have some trouble about samba networking

Hi, I'm using heartbeat as a failover for my asterisk server. on the active server 1 i have 10.10.10.1 eth0 10.10.10.3 secondary eth0 asterisk listens to the secondary ip, so that if server 1 fails, server 2 will then get that IP. so if server 1 fails, server 2 will have the IP 10.10.10.2 eth0 10.10.10.3 secondary eth0 problem is i have to bind asterisk to the secondary IP if dont, i

Hello, I have 2 asterisk servers that are not working well together. One is acting like a registrar (PBX01) for all my PAP2's and other SIP/IAX devices. And the other is acting like my sip gateway (PBX02) to various providers. They are both on a private network and should be trusting each others IP 100%. But the PBX02 challenges PBX01's requests all the time even though

OS- windows vista 32-bits Control Panel -> Network & Sharing center Network discovery ON File Sharing ON Public folders Sharing ON Password protected sharing ON Media Sharing ON Window firewall turned OFF McAffee firewall turned OFF Case 1: Connect to LAN using wireless connection (network type= private) I can open the windows share, look at the list of shared folders & open them.

Hello, I am currently using Samba 2.2.3a on a Sequent box running DYNIX/ptx v4.0. We are serving up approximatly 4.5 terrabytes of data from a Hitachi Data Systems storage array connected to our server by fiber channel. Many of our users are on Citrix which connects to our SAMBA server via a Gigabit Ethernet connection. There are still others that are connecting directly from their PCs which are

Looking for a mentor... Having some issues with Asterisk 1.4.22 install. I am new to both Linux and Asterisk, however have 20+ years programming experience. First off I hate asking questions I could answer myself. I have and am reading The Asterisk manual, 2nd edition. I have successfully installed CentOS 5.2 and used yum to get a C compiler, current speed bump is with ./configure bash:

Hi Folks, I have a situation where my Colo insists on a particular IP setup for my * server box. They allocate two blocks of IPs to my colo server. One set as my own (ex 20.20.20.20.4/30 - 4 ips) and the other as a transit lan (es 10.10.10.0/29). These are all public IP addresses and there is no NAT involved in. So essentially I have to set-up IP aliases in my Linux box as follows; Example:

> Hi Folks, > > I have a situation where my Colo insists on a particular IP setup > for my * server box. They allocate two blocks of IPs to my colo > server. One set as my own (ex 20.20.20.20.4/30 - 4 ips) and the > other as a transit lan (es 10.10.10.0/29). These are all public > IP addresses and there is no NAT involved in. > > So essentially I have to set-up IP

Hi, What did I miss / do wrong? My config didn't work like on the below linked video: http://www.samba.org/~tridge/ctdb_movies/node_disable.html With my config, the copy process fails/breaks despite that the tesztxp PC successfully maps the other (samba) PC in case the first (samba) PC is out. In the samba logs (even at log level = 10) I didn't see any information that can help me solve

OK before i start, this was something i was just testing while everyone was in training this afternoon. I have never had to deal with subnets before as we only have a few users, but decided to do a little bit of messing around to gain some experience. Basically we have one server (mandriva 2006) running samba, it has two 4 port ethernet cards in it but only utilitising one port from each card.

Hello everybody, I'm setting up my first virtual private network and I can't get thru with this problem. Here's my current configs: ***/etc/tinc/vpn/tinc.conf*** Name = eci-cebu ConnectTo = eci-sampaloc Device = /dev/net/tun PrivateKeyFile = /etc/tinc/vpn/rsa_key.priv *** ***/etc/tinc/vpn/tinc-up*** #!/bin/sh ifconfig $INTERFACE hw ether fe:fd:0:0:0:0 ifconfig $INTERFACE

Hi: First of all, thanks for this great piece of software! I found very clear the presentation sheets used at Linux Expo, Amsterdam. :-) About my problem, I setup everything to connect our two boxes. If I type 'ifconfig' I can see them up. Also the routes. ISIvirtual - Our firewall (iptables) which connects to the Internet through ADSL with a public dynamic IP. (the SSL client)

Hi! I am new to Mongrel but really like it so far. We''ve been running a single instance for our test server for about a week now. When one of our editors accesses the site, they receive a blank white page in Firefox and/or IE6/Win. In Mongrel logs we see this: Wed Aug 09 16:25:30 PDT 2006: BAD CLIENT (192.168.2.42): Invalid HTTP format, parsing fails. Wed Aug 09 16:25:31 PDT

I want to configure a device with three network interfaces where two of them would bridge two segments of the LAN subnet and the third one would be connected to the WAN link. eth0 - 10.10.10.2/24 to be connected to the internet gateway having IP 10.10.10.1/24 (also the default gateway for the device) eth1 and eth2 bridged as br0 with IP address 172.16.100.1 connected to different segments of the

I've noticed some inconsistent performance with some of my tunnels and thought I would take some of the spare free time I have over the holidays to try to figure out what the cause of that may be. My environment in this case is my home LAN. Please forgive my use of the terms "server" and "client" in this email, I only use these terms to simply explanation. I statically

Hi all, There's long time I'm having problems with a vpn... I'd be glad if somebody could check my current setup. Our problem is we're having tinc-vpn shortcuts while we have no bandwidth problem nither 'ssh' trouble. I attached some log lines from both the "server" and the "client". Some ASCII art... ___ ___ ___

Greetings, On 3/24/11, Akemi Yagi <amyagi at gmail.com> wrote: > I should note, however, that they are not for production use. > > Akemi Thanks Akemi very much for your always relevant and brilliant works. </rant> As an Indian, where "veda" repository of knowledge originated, I have always looked at every member of this list as a repository of knowledge.

I'm using dovecot in a multi server setup. Two directors forward pop3, imap and smtp to backend dovecots with their central storage on NFS. Yesterday I stumbled upon these log lines: 2019-11-18 20:17:51 lmtp(17274): Info: Connect from 172.22.1.6 2019-11-18 20:17:51 lmtp(17274): Panic: file smtp-client-connection.c: line 1142 (smtp_client_connection_established): assertion failed:

Hello all, I must admit that I am new to the Linux/PXE world, and so, am still learning a lot. I am currently in the 2nd semester of a senior project at Weber State University in Utah, trying like mad to get a diskless Beowulf Cluster up and running. I was given a grant to purchase 4 nodes running this equipment: Pentium D dual core Processor MSI 965 Motherboard Intel Pro/1000 GT PCI adapter

hi guys, I have problems with authentification in a 2003 domain membership configuration of samba 3.0.7. I'm a newbie in linux systems, then I will give you my configuration process of the program. The samba server is installed on a Redhat 9.0 without any base install of samba, without kerberos and with the open LDAP RPM installed. I follow this procedure to build binarie from sources

Recently switched main samba servers and turned up a problem CUPS printers are all published and can be connected to by browsing the server, but if, as I was used to doing, you connect by entering the UNC of the printer directly in the run dialog in windows. you get "\\server\printershare is not accessible. You might not have permission to use this network resource. Contact the