similar to: 3 questions

Hi all. I would need to use a single physical interface on a Linux box to manage two different IP addresses (belonging to two separate logical subnets) with two different MAC address. (I need to emulate te presence of two separate physical interfaceses for a PC on the same LAN, at layer 2 and layer 3). Is it possible to use the linux ethernet bridging code and two tap interfaces for this

Hey all, I recently read on a prior post as well as the FAQ that packets can be limited by mac address using the u32 filter. I attempted this and, while all the commands went through with no errors, it is not limiting at all. I''m attempting to limit all IP traffic to a specific destination mac address (00:12:3f:05:43:7f). Here is a quick rundown of the commands

Trying again, after re-subscribing: On 11/20/06, Bob Beers <bob.beers@gmail.com> wrote: > Hello, > > I want to dynamically create DNAT rules for > RTP streams (port-mapping for a SIP proxy). > > If my proxy adds the rule before the first packet > of the RTP stream hits the port, all is well. But, if > the stream begins arriving before my rule is in > place,

The file are there: http://thdei.info/results.zip and http://thdei.info/mos_6_MOS-USA_Test-114_20060605-042551cut-PESQ.png because, last time I put them in attachment and the mail was waiting for approvement and I never see it anmore . ________________________________ From: Deillon Thomas-WTD008 Sent: 05 June 2006 14:32 To: 'asterisk-users@lists.digium.com' Subject: Quality of Asterisk

Hello samba dancers, I'm Friedrich Strohmaier and new to this mailing list. More important: I'm (very) new to PDCing Computers in a network, and I ran in big troubles doing so. Try to tell a long story in short: I'm a fairly experienced administrator for linux systems, and was orderd to move a serverinstallation (SuSE7.0, Samba2.2.x) to a new machine. The old machine did stop

Hi again, First, i revert to a snapashot with samba 4.7.7 and upgraded it to 4.7.8. I got no issue with my settings and "testparm" outputs as expected. Next i tried again upgrade to samba 4.8.3. But i got the same error like an email before. Yes i guess its a problem that "tesparm" cant read the registry. When im removing "include = registry" and add my global

The following (occuring on debian/testing with kernel-image-2.6.8-2-386 version 2.6.8-13 and iproute version 20041019-3) confuses me: # tc qdisc add dev eth0 root handle 1: prio # tc filter add dev eth0 parent 1: proto ip pref 1 handle 1 fw classid 1:2 # tc filter ls dev eth0 filter parent 1: protocol ip pref 1 fw filter parent 1: protocol ip pref 1 fw handle 0x1 classid 1:2 # tc filter del dev

Hi, it seems that "ip address delete" will delete all addresses of the same class on an interface if it is ordered to only delete the first one: # ip a f eth0 # ip a l eth0 3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether xx:xx:xx:xx:xx:xx # ip a a 192.168.a.b brd + dev eth0 # ip a a 192.168.c.d brd + dev eth0 # ip a d 192.168.a.b brd + dev

Hello, After a migration from Samba 3.0.2a to Samba 3.0.21b on a Sun server Solaris 9, we have problems with "charset cp850 conversion not supported". tesparm -v : ... init_iconv: Conversion from cp850 to UTF8 not supported ... In the smb.conf we have : unix charset = cp850 dos charset = cp850 If we change these parameters or if we use their default value, the name of files or

Hi ! I have installed a DC with samba-tool command and it works perfectly ! Control AD with the 2003 tools is very amazing, thanks for the job ! So, my next step is to install a file server as a member of the AD and not as a DC I read carfully this one : https://wiki.samba.org/index.php/Samba4/Domain_Member Compiling samba : * ./configure --with-ads --with-shared-modules=idmap_ad

Server : eth0 - internet DSL eth1 - LAN wlan0 - wireles LAN I want server to share bandwith from eth0 evenly for users on eth1 and wlan0. How can i make it ? Is it possible ? As far as i know htb splits outgoing bandwith on one device only. ---------------------------------------------------- Grypa? Damy radę! Sprawdź jak jej zapowbiegać, a jeśli już za późno ...jak leczyć - grypa.wp.pl

Hello, Ive had a poke around through various linux routing documents, but haven''t found what I think is an elegant solution to a routing issue I''m having with a hosting provider and RHEL ES 4 running in a VMware VM. Here''s a diagram of the situation : Default route at provider our host (A) 72.3.230.1/26 ---- 72.3.230.30/26 the VM (B)

I have a setup that looks roughly like: # cat smb.conf [global] security = ads workgroup = company realm = internal.company.com password server = 192.168.1.2 netbios name = server server string = Samba Server name resolve order = wins bcast username map = /etc/samba/smbusers map to guest = Bad User invalid

We have a samba 3.0.7 server on RHEL-3 (rain) joined as a domain member (security = domain) to a win2k pdc (clouds) for the domain DOM. We have several unix users and two Win-only users. The unix users have matching AD accounts on the win2k, but the Win-only users do not have unix accounts (and we want to keep it that way). So, it seemed that winbind would be the best way to bridge the gap: 1.

Hi. I'm using CentOS 5 with samba3x packages (Samba 3.5.10) and Solaris 10 (Samba 3.5.8) for achieving AD integration. Samba hosts are added as domain members. Now, I've tried to add CentOS 6, which also uses 3.5.10, but have encountered a problem -> users cannot authenticate for some reason. Configurations are pretty much the same across the board, and they look like this: #

Just when I thought I couldn't be wrong, I was wrong. We have woodpeckers that drill into the arial telephone cables, and water seeps through the holes and partially grounds the tip and/or ring wires causing hum. I thought the hum/buz on my lines was a telco problem. The Qwest HQ noise team assures me that my lines are within spec. Sure enough, when I listen on the test set the lines

I have a share with folders belonging to diferent groups, with restricted access depending on unix groups. When a user creates a file inside one of this folders I want it created with "directory group"; I think it should be possible using "inherit acl" but it don't work; my share configuration is: [arees2] path = /home/samba/arees valid users = @users

Apologies for the double post in re my SPEEX issues, but can anyone report successfully installing libOgg and getting SPEEX to work on Asterisk? Details: Fedora Core 3, Asterisk 1.0.4, VoicePulse Connect. Here's my original query with the CLI log http://lists.digium.com/pipermail/asterisk-users/2005-February/ 088225.html Thanks. /rg

There is a Slashdot discussion today titled "Cambridge Researcher Breaks OpenBSD Systrace". Slashdot anonymous member has a comment "Even Sun''s Dtrace might be vulnerable." I don''t think it is. Comments? Exploiting Concurrency Vulnerabilities in System Call Wrappers http://www.watson.org/~robert/2007woot/2007usenixwoot-exploitingconcurrency.pdf Abstract

After working with the Grandstream GXP 2000 series phones, I have decided that I am quite unhappy with their problems, both voice quality, volume, features and others. For their price now, there are plenty of phones to choose from as well. So subjectively what would be the best Hardphone for a small/medium business with multiple line support, BLF, etc. Are the Cisco 7960 the best of the