similar to: Using domain logons with 2 controllers and wireless lan

Has anyone had any experience with wireless LANs and Asterisk? We have and here are my impressions. We configured an Asterisk in the office as a precaution to see how it would work for our own retail customers. Our office is open space, about 800 sq ft. (20x40 area). We use Snom200 and Grandstream SIP phones. Using the latest Linksys wireless access point (WAP54g) and 3 wireless bridges

Hi list gurus, long story short we have firewall machine which is the default gateway for our clients and firewall send traffic out to Internet via cisco router. On cisco we have two serial interfaces 1Mb and 2Mb. On firewall #route add default gw xxx.xxx.xx.xxx (for 2mb) #route add default gw xxx.xxx.xx.xxx (for 1mb) and the same rule for Imb link route packets via these two links. However I

Is there any way I can find a driver and/or get the above wireless card working in CentOS 5 on my Dell laptop (Inspiron 1501). I've installed ipw2200 from RPMForge, but it now appears that this won't work because the card is not an Intel PRO/Wireless card. Dell seem to support only MS Windows Vista now so I don't think there's much chance of getting a driver from them - so am I on

Is there any issues with running icecast on a wireless lan. My friend has the encoder on 1 machine and is feeding it to icecast over a wireless nic to another machine which is connected to a router via a wired NIC but after the feeds been on for awhile it starts buffering. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Weather @ 8:00pm - Temp: 17.0 ?C - Humidity 55 %

Hello, I am afraid if I post in an inaproprate forrum. I am novice in the traffic control TC with Linux. I have a R&D project and i should to apply a lot of QoS mecanisms in a wireless environement! I have an access point witch is rely to a PC and three laptops. The PC play a role of a controleur. All traffic must travers throw it. I have configure the AP to only play a role of a forwarder.

On the following system: Linux 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux the Intel 5100 pci wireless adapter appears to be detected and a reasonable driver is indicated (iwlagn) but the radio does not appear to be on, at least the little antenna like LED is off. The radio switch is on and the Bluetooth LED is on. Has any one conquered this yet? --

Several weeks ago (July 1st), you may remember me asking about using a Linksys WET11 (ethernet to wireless bridge) with bridge-utils. Mark Mathews was kind enough to respond and described a situation he called "b/mcast echo". From his reply: " Because of the games that have to be played to build WLAN station bridge devices, some have a problem with what I call 'b/mcast

Hi all, I'm trying out bridging for my wireless and wired LAN, so that they can both use my PPPoE connection. Here's the network structure, pretty easy: darjeeling (192.168.1.7) ringo (192.168.1.3) (mtu 1500) (mtu 1500) \ / \ wlan0 <--br0 (mtu 1500)--> eth1

Hi all, I want to create a bridge (see picture below) between 2 LANs with the same IP range (192.168.0.0/24) using 2 wireless links that use load sharing over multiple interfaces (as descibed here: http://lartc.org/howto/lartc.loadshare.html) for load balancing and fault tolerance. Both links should use IPsec for encryption. I have googled for an example that does this but I could not find it.

CentOSinz, I have Intel Wireless LAN 2100 Adapter; is this working perfect with CentOS 4RC1? I want to make sure before installing to my notebook (Dell Inspiron 510m). Any advice? Thanks. str

i'm not sure how to create different logon scripts for different users. right now i have one logon script called 'logon.bat' that maps all users to a server share and syncs the time with the server. i need to be able to map different users to different server shares. not all users should be mapped to all server shares. these should be automatic mappings. for example: user1 should

Hi all, I've got a Dell Inspiron 1501 with a Broadcom 1390 Wlan mini card (integrated) wireless lan chipset. I've got an init script setup to activate the wireless connection at boot time, however when the system boots the adapter doesn't connect. I'm not able to get a connection until after the desktop is done loading and I run the script from the command line. After some

or you get the sources of those kernels and take the diff command?to find the different... > Am 15.04.2016 um 15:35 schrieb Andreas Benzler <andreas at benzlerweb.de>: > > > in the mean while i compiled a vanilla 4.4.7 (LTS) kernel. > > http://centos.cms4all.org/centos/7/kernel/x86_64/ > > http://centos.cms4all.org/centos/7/kernel/noarch/ > > firmware

Greetings: I'm just installed Centos-4 on an IBM T-21 laptop. So far so good. Now I'd like to pop in a wireless lan adapter. I'm looking at a buying a Linksys WPC54G adapter (although I haven't done so yet). After doing some searching, it looks like the best way to get this card working is via ndiswrapper [http://ndiswrapper.sourceforge.net] and then to use Windoze

Hello, I am performing a BACI analysis with ANOVA using the following glm: fit1<-glm(log(Cucs_m+1)~(BA*Otter)+BA+Otter+ID+Primary, data=b1) The summary(aov(fit1)) shows significance in the interaction; however, now I would like to determine what combinations of BA and Otter are significantly different (each factor has two levels). ID and PRIMARY substrates are categorical and included in

I have added a 4th NIC to my setup, and want to set up wireless. I have stared at the configuration Tom has for the last week, and my eyes are crossing. eth0 "net" goes to my internet connected firewall with a 192.168 address eth1 "loc" goes to my switch connected to local switch also 192.168.x eth2 "work" goes to my office with a 172. address eth3 Trying to

Is there a file I can place in the netlogin directory (or anywhere else for that matter) that will represnet a logon script? I want to have my workstations auto-mount particular shares on the samba server, without the user having to make the mount. This way when I add new users, the shares are automatically present. If there is a script I can place somwehre, please tell me what it's name is

Hi all, I am trying to configure wlan0 interface to use it with kvm guests. I know that I need to use ebtables statements due to it is not possible to link wlan0 interface with a bridge. I have followed Debian's tutorial: https://wiki.debian.org/BridgeNetworkConnections#Bridging_with_a_wireless_NIC without luck. Someone have tried?? I am using CentOS 7 fully patched. Thanks.

There has recently been some discussion on the list about AD Model builder and the suitability of R for constructing the types of models used in fisheries management. https://stat.ethz.ch/pipermail/r-help/2006-January/086841.html https://stat.ethz.ch/pipermail/r-help/2006-January/086858.html I think that many R users understimate the numerical challenges that some of the typical

| yes, the exit code will be 1 if any of the flac files failed | testing, else 0 (i.e. if all of them passed). Thank you, Josh! Now the only trick is to see whether command.com can do anything with that information.