similar to: My fault (not ext3's!) and kernel panic on 2.4.7 .

Hello all. I am using plain 2.4.7 with ext3-2.4-0.9.4-247, compiled with gcc-2.96-85 on a RH7.1 distribution with the relevant changes, i.e. e2fsprogs-1.22-1, mount-2.11g-4 and util-linux-2.11f-3 taken from rawhide. I am using sometimes my /usr/local partition for ext3 testing: /dev/hdc2 3842408 738176 2909044 21% /usr/local For my DIY testing, I am timing this trivial

Sorry, this is going to be a rather long post...Here's the situation; I have 4 IDE disks from an old snap server which fails to mount the raid array. We believe there is a controller error on the SNAP so we've put them in another box running CentOS 5 and can see the disks OK. hda thru hdd looks like this Disk /dev/hdd: 185.2 GB, 185283624960 bytes 255 heads, 63 sectors/track, 22526

When attempting to mount the OCFS2 file system I'm getting the following error message: ocfs2_hb_ctl: Internal logic failure while starting heartbeat mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted" I followed the steps given in the users_guide: modprobe ocfs2_dlmfs mount -t configfs none /config mount -t ocfs2_dlmfs none /dlm o2cb_ctl

I decided to start using ext3. My kernel 2.4.15p9. I downloaded and build util-linux-2.11m and e2fsprogs 1.25. I compiled ext3 in the kernel. I started converting my filesystems and thing went ok for the first few. I then started getting the following on each additional filesystem. [root@joker /root]# tune2fs -j /dev/hdc4 tune2fs 1.25 (20-Sep-2001) Creating journal inode: done This filesystem

Had a drive crash which a very critital inode. e2fshck returns a stream of : Entry '..' in ... (#######) points to inode (2) located in a bad block Pass 3: Checking directory connectivity Root inode is not a directory: aborting e2fsck: aborted /dev/hda4: ***** FILE SYSTEM WAS MODIFIED ***** Floating point exception I'm wondering if I can use debugfs to relocate (rebuild)

SSH doesn't seem to be responding to me. The machine I am connecting to is running Linux, and I could connect to it fine from windows running the SSH client. But now I can no longer connect. From Linux, this is the output: pc078:~$ ssh -v 208.240.199.51 SSH Version OpenSSH_2.2.0p1, protocol versions 1.5/2.0. Compiled with SSL (0x0090600f). debug: Reading configuration data

Hi, "Mircea Popescu" <nufarul.alb at go.ro> schrieb am 29.01.02: > I have this problem: > I've partitioned my hard drive with PQMagic 7 in the following way: > hda1 - fat32 > hda2 - ext2 > hda3 - fat16 > hda4 - extended > hda5 - Linux Swap > hda6 - fat32 > hda7 - ext2 > hda8 - fat32 > > I've put syslinux on

Hello, sorry if the question was asked a couple of times before but I couldn't find any useful hinds to this problem using google and the listman search-engine of the archive of this list. Somehow the ext3 filesystem on one of my machines died an after a reboot grub wouldn't come up again. What I did so far: fsck -y /dev/hda4 fsck 1.35 (28-Feb-2004) e2fsck 1.35 (28-Feb-2004)

To test CentOS 5, I loaded from DVD adding it to a system at home running Fedora Core 7 T2. Partition Layout is: /dev/hda1 - / for the RH7T2 system /dev/hda2 - /home /dev/hda3 - swap /dev/hda4 - extended /dev/hda5 - / for CentOS 5 The system loaded cleanly and gave me the opportunity to tell grub about the other system. CentOS boots fine. Grub Stage 2 will show me both systems.

> My HDD got /dev/hda1 which is DOS6.22+w3.11 > hda2 which is w95B > hda3 which is linux native > hda4 which is linux swap > > How sd I enter the win references in my config file in order to be able > to run both w311 and w95 programs ? > > One out of the difficulties is that with the last LILO, You can start > whether w311 whether w95 without having to change

I tried sending this e-mail to the list earlier but no one replied... Right, so I''m brand new to xen, and I''ve had success in making xen boot (kernel /boot/xen-2.0.6.gz module /boot/vmlinuz-2.6.11-xen0), but there are a couple major issues. 1) The screen resolution. I''m running a ThinkPad T30 (2366-92U, for those who want to know), and all the text looks fuzzy. I

>That should work, *IF*: > >a) hda5 is a FAT12/16 filesystem; >b) hda5 is <= cyl 1024. > > -hpa I got thinking booting off a logical partition might not be allowed, so I changed the LEAF/Bering logical partition to a primary, hda4. Then I ran "syslinux d:" from a Win98SE DOS-box to (try to) initialize the partition's boot record. And added this from a

Using --debugmsg warn+all, I get a warning that Drive C: is not defined In my config file I have: [Drive C:] "Path" = "/mnt/C:" "Type" = "hd" "Label" = "Windows" "Filesystem" = "win95" "Serial" = " " "Device" = "/dev/hda4" and I am trying to run a program actually in

Hi users, I was working with GNU parted and got some changes in the partition and the system crashed. I had to freshly install RH Linux 9 again as it didn't detect the linux installation. Now the problem is /dev/hda is mounted but not showing any data files. It has full of data originally. Anyhow Can i recover those data. I didnt format any of the hard drive expect the root partition for

Hello: Starting Friday afternoon, I blew away the installations on the three (3) boxes we use as Desktops. On two (2) of them (my Dell Dimension 2400 and my wife's Compaq Evo D300v), I have MS Windows XP and CentOS5 running. :-) On my daughters box (Dell Dimension 4300) I am having problems with the partitioning. Probably this is due to some mistake I have made, with regard to

Hi, I''ve installed xen-2.0.5 from source on gentoo, but the xen dom0 kernel doesn''t find the root device: ############################# snip ###################################### Kernel panic: VFS: Unable to mount root fs on unknown-block (3,3) ############################# snap ###################################### grub.conf: ############################# snip

greetings. i have been three days now trying to add ext3 to an existing suse-7.3 machine. i am using suse's own 2.4.13 kernel source. here is what i have done: following install, i ran tune2fs -j /dev/hda2 (also hda3 and hda4). .journal files were created on each partition, apparently uneventfully. wishing to avoid ai irreversable situation, i initially edited /etc/fstab thusly:

Hi, I tested xm block-attach command with a wrong parameter(file:). Naturally a command error occurred. Then I retested xm block-attach command with a correct parameter(phy:). But a command error occurred again. The second command error occurred because Xend did not remove device information from self.info when the first command error occurred. # xm block-attach vm1 file:/dev/hda4 hdb1 w

I have a samba server (3.0.10) that was compiled and installed this morning. I'm seeing a strange problem that I haven't seen before with Samba. No matter if I connect from my Linux laptop, or my WinXP desktop I receive the error stating "Not Enough Free disk space" (From the windows macine), and "cp: writing `public-share/gmp-4.1.4.tar.gz': No space left on

Hi everyone, This is a strange problem I have been having. I'm not sure where the problem is, so I figured I'd start here. I as having problems with Bacula stopping on 17Gig Volume sizes, so I decided to try to Just dd a 50 gig file. Sure enough, once the file hit 17 gigs dd stopped and spit out an error (pandora bacula)# dd if=/dev/zero of=bigfile bs=1M count=50000 File size