similar to: Incorrect permission of mount despite correct options

From: starrte@clarkson.edu Subject: Incorrect permission of mount despite correct options Date: April 9, 2004 2:00:49 AM EDT To: samba@lists.samba.org Mime-Version: 1.0 (Apple Message framework v613) Content-Transfer-Encoding: 7bit Message-Id: <40381AAA-89EB-11D8-87D8-000A27944740@clarkson.edu> Content-Type: text/plain; charset=US-ASCII; format=flowed Hello, this is a

I am using Asterisk 11.17.1 with my program that uses AMI Originate calls to generate a bunch of calls for a callcenter. The PBX configuration is handled by FreePBX 2.11. I want to understand the dialplan behavior in order to figure out why the CDR(recordingfile) is blank on the CDR records despite the dialplan setting it. My program generates the calls by setting Channel=Local/NUMBERTODIAL at

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox

I currently have the following outbound-local config in my setup.... I can call SOME of the numbers (like 337xxxx, and 998xxxx, and 323xxxx).. but when I try to dial say like 601xxxx I get a 404.. any thoughts, I can't see any difference in the config. Also, I seem to be able to dial any number that starts with a 9.. such as 977, 990, 903.. [outbound-local] ;exten =>

Hello Asteriskers, :-) We're trying to set up an outbound notification calling for system alerts with Asterisk 1.4.0. We generate a call file in /var/spool/asterisk/outgoing and the outbound call is originated through Zap/1 (Sangoma A200D to a Canadian POTS line). The problem is that Asterisk does not wait for the other side to answer before it starts playing the message. So the

Hello, Sometimes the call gets answered for 1 second, but actually the phone has not rang, it?s just the CDR, and asterisk hangup automatically, I cought the log of 1 call like this, I hope you can help me with this. My setup is : <vendor> ----SIP--? <Asterisk> ?----IAX2---? <Asterisk with Dhadi channels> Here: -- Executing [966505103150 at from-internal:1]

El 07/04/15 a las 17:38, Alex Villac??s Lasso escribi?: > I am trying to collect enough information about an problem a client is having with its asterisk 11.17.0 x86_64. This issue was observed before in 1.8.20, and we upgraded to 11.15.0 and then to 11.17.0 with no solution. > > Background: this client is a telemarketing call-center that generates outgoing calls with close to a hundred

thank you for your response below the asterisk -vvvr Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [0176XXXXXX at from-internal:1] Macro("SIP/300-00000192", "user-callerid,LIMIT,EXTERNAL,") in new stack -- Executing [s at macro-user-callerid:1] Set("SIP/300-00000192", "TOUCH_MONITOR=1427481319.470") in new stack --

I am making some assumptions, but assuming the 217.195.xx.xxx is your provider, you are getting this back from them: "Got SIP response 556 "No address found" back from 217.195.xx.xxx:5060" Are you sure that "0033149xxxxxx" is the format the provider is expecting? You might try enabling SIP debug on the 217.195.xx.xx IP and seeing what the INVITE looks like, but

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

> -----Original Message----- > From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users- > admin@lists.digium.com] On Behalf Of Robert Withrow > Sent: Tuesday, June 15, 2004 12:32 PM > To: Asterisk-users > Subject: RE: [Asterisk-Users] making * more like a normal pbx (ciscoata- > 186) > > On Mon, 2004-06-14 at 19:34, Reid A. Forrest wrote: > > I've

thanks for your response i noticed that when i active the voicemail in the IP-phone where the number 0033149xxxxxx is configured i can call this number without issue the server asterisk and the ip-phone where the number is configured are in the same network 192.168.1.X Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Called SIP/FD/0033149xxxxxx == Begin MixMonitor Recording

I'm having trouble setting callerid with teliax. I use a simple dial-out subroutine to set the callerid depending on the calling extension, and then dial out. Teliax is saying they're not seeing any callerid info. [DialOut] ; subroutine for dialing out. exten => s,1,NoOp(Context: DialOut called with outgoing number ${ARG1} ) exten => s,n,NoOp(${CALLERID(num)}XXXX) exten =>

Hi list! I have this configuration for sending T38 faxes to my T38 fax termination provider: T38modem --> hylafax --> Asterisk-SIP-Extension --> T38 termination provider --> T.30 termination to PSTN We are experiencing 2 problems with this (if you want configuration files, it won't be a problem, just tell me): 1. T38 termination provider receives faxes at 2400 bpps from our

hi,all when i send a call to other server use SIP trunk, i got this below, <--- SIP read from 222.46.18.52:5060 ---> SIP/2.0 403 Forbidden what's rong with is? > Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others. > Created by Mark Spencer <markster at digium.com> > Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for

i have a prablom here, i want to send a call from A to B use sip trunk , the call can sended B,but not work to PSTN. the message from B server. help pls,what's rong? > > <--- SIP read from 192.168.0.176:5060 ---> > INVITE sip:15921256331 at 192.168.0.151 <sip%3A15921256331 at 192.168.0.151>SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.176:5060;branch=z9hG4bK51a51b96;rport

Have you tried Asterisk 13? The bridging mechanism has been completely rewritten on Asterisk 12, so there's no longer channel masquerading and zombie channels. Might be worth a try. 2015-04-07 20:33 GMT-03:00 Alex Villac??s Lasso <a_villacis at palosanto.com>: > El 07/04/15 a las 17:38, Alex Villac??s Lasso escribi?: > > I am trying to collect enough information about an

Hi, I'm trying to use ChanIsAvail to build a resilient 'dialout' macro. The logic is simple; try Zap/g1 (a group of two E1s), and if that fails, try locating a channel via DUNDi. Here's a massively cut down version to illustrate the problem I'm having. macro dialout ( dest ) { ChanIsAvail(Zap/g1); noop(Value of AVAILCHAN is ${AVAILCHAN});

Greetings *`s, I am manually creating call files and dropping them into /var/spool/asterisk/outgoing to be picked up by *. Presently, when I use local/internal parameters using SIP it works..ie I make an internal call from device to device. However, when I try dial an outside number which I have set up in a custom conf file, it bombs out with the following message :

Hi All, I have searched the various post and not able to find the solution. I am using Asterisk 1.4.21.2 for outgoing calls. Earlier i used ZAP trunk and it works fine. Now i need to move to SIP trunk and configured the same. When i try from softphone i got error as "Call rejected" and in the asterisk i got error as