similar to: lost CUPSslibs support after upgrading to samba 2.2.8a-1

I'm seeing the following error in the logs. It's only from one machine, none of the others generate the error. The basic error is: "connect_to_client: machine KW1 rejected the tconX on the IPC$ share. Error was : NT_STATUS_ACCESS_DENIED." Following is a log excerpt: Jul 22 15:50:56 server smbd[15267]: [2002/07/22 15:50:56, 0]

Perhaps one of you could lend us a hand with this... We are trying to setup an open access print server using RedHat 7.3 and Cups 1.15. We are seeing the following error message on some of the log files related to some Win2K users: [2002/07/18 08:57:35, 0] rpc_client/cli_spoolss_notify.c:spoolss_connect_to_client(133) connect_to_client: machine JLEE rejected the tconX on the IPC$ share. Error

We are in the process of uploading drivers to the samba server. Everything seems to be working but it is very slow. When you browse to the Printers and Faxes folder it takes a good 30 - 60 seconds to see the printers. I have also noticed that when you try to send a print job you seem to get the same delay. Below is what I am assuming to be a logged event related to this problem. File

Firstly, apologies for asking this again, I see that it cause a mail loop lasttime. We've setup samba(2.2.4, no patches) and installed the printer drivers using the methods decribed in the printer_driver2.html. The drivers have appeared to have install correctly, we you right click on the printer share and select properties the relevent tabs for the printer driver appear. However, once

I was experiencing a big delay in opening printers served from a Samba station on workstations running both Win2k and WinXP. The delay occurs whenever anything specific to the printer is opened. For example bringing up the job queue for the printer and opening the properties dialog for the printer both produce the delay. Cranking up the logging level and combing through showed the delay was

I see into my logs... [2002/08/21 00:18:35, 0] rpc_client/cli_spoolss_notify.c:spoolss_connect_to_client(109) connect_to_client: machine NT2000 rejected the tconX on the IPC$ share. Error was : NT_STATUS_ACCESS_DENIED. It appears when I want to print something, I am usings cups software to print over samba. Is that message an important problem or I can ignore it?

I don't get it. Why is this listed as an error, when the return code is 'success'? [2003/10/06 10:35:09, 0] rpc_client/cli_spoolss_notify.c:spoolss_connect_to_client(91) connect_to_client: unable to connect to SMB server on machine PP086134. Error was : SUCCESS - 0.

Hi... I have set up my smb.conf to use the print$ directive, and have shared 3 printers. I sucesfully added the printer drivers to the host, and can use them. But - opening up the printer connection from the windows host is slow, and causes the printer 'status' window to say 'initializing'. While that happens, my samba.log shows : 2003/07/29 16:44:40, 2]

Hello, I am getting this error when Win XP machines print to my SAMBA server. I think it is a compile issue, if so how do I recompile or get it in place. I used RPM to 'install' SAMBA. Anyone have any suggestions? I am using SAMBA 2.2.6a with CUPS 1.1.8 on Caldera OpenLINUX 3.1.1 Error: Jan 24 11:15:34 heatconlinux smbd[4787]: [2003/01/24 11:15:34, 0]

Hi All, I'm attempting to set up print-sharing on a Samba 2.2.7 running on Redhat 7.3. Both 98 and 2000 clients can print fine and dandy if I install the drivers I downloaded from HP (I'm using a LaserJet 5MP for reference). What I want to do is install the drivers to the Linux box so future clients can download the drivers painlessly. I believe I've followed the instructions in

Hi, I've got a small network with a few Windows XP machines. I'm running into a problem where I can can print but others cannot. For me, everything works great and as expected. However, for the others, they seem to have intermittent problems where Samba complains with multiple lines such as the following: Jul 17 22:02:37 chung smbd[472]: [2003/07/17 22:02:37, 0]

I have encountered a bizarre problem upon moving from Samba 2.2.2 to 2.2.4 on our local print server. When a client tries to map a printer, the server does a DNS lookup on the netbios name of the client, and tries to contact that IP address. This can fail in situations where the client's netbios and DNS names don't match, as in a wireless network user. The failure doesn't prevent

I am attempting to add a NetApp filer to a Samba Controlled Domain. Has anyone had any luck getting this to work? Googleing for information yielded some indication that some kind of RPC bug related to netapp was fixed in 2.2.2 but I couldn't find anything relating to adding a netapp to a domain. I am willing to provide anything else anyone else might want but don't want to clutter up

Hi, I'm using debian woody with samba (2.2.3a-12.3). After installing 2.2.8a everything that worked, still works. What didn't work, still doesn't work. Sharing files works properly. I'd like to share a printer via the samba server. When I go to the printers&faxes share in explorer, no printers are shown. Hereunder is my smb.conf, /etc/lprng/printcap, and the logfile

OK, I have been wrestling with this for two weeks now, so somebody please help ! We have an existing Samba Print Server, running RedHat linux, kernel 2.2.19, that runs fine, but is a P133 with 64 mb ram. So we built a new PC, the slowest thing we could buy, a duron 1 ghz with 512 mb RAM. Old printer server is running Samba 2.2.5, new printer server is running samba 2.2.5, and Slackware 8.1,

Hello, I've compiled Samba 3.0.0 with CUPS support. I verified this: # ldd /usr/local/samba/sbin/smbd *snip* libcups.so.2 => /usr/lib/libcups.so.2 (0x400dc000) *snip* My smb.conf was copied from the HOWTO and the relevant sections look like: [global] *snip* # print support load printers = yes printing = cups printcap name = cups *snip* [printers] comment = All

Buenas. Alguien sabe como representar juntos , de forma fácil, los boxplot de todas las columnas de un data.frame. A mí lo único que se me ha ocurrido es unir las columnas en un vector numérico y crear un factor que me diga a que columna pertenece cada uno . ¿hay alguna forma más fácil? indice <- rep(1:ncol(datos),each=nrow(datos)) indice <- factor(indice) levels(indice) <-

Hi, I try to configure printers drivers on a samba server named lct8 (i read the printing support in samba 2.2.x), the smb.conf looks like : [global] secutity = SERVER passwd server = PDC (...) printer admin = @sysadmin, guy [print$] path = /usr/local/samba/printers write list = @sysadmin, guy create mask = 0644 guest ok = Yes [hpcolor] path = /tmp printable = Yes With win2k (host

Samba 2.2.8a-1, RH8. ... So, I had to reinstall. Fortunately I had a back-up copy. I've installed everything and then went to back-up and brought back all the stuff from /etc/samba and /var/cache/samba and all /etc/cups and /etc/printcap*. Aparently samba is working corectly: All user/machine accounts are in place winbind OK... It's just that although I've restored the /home/printers

Ok... here we go, I have a server running RH 7.3, samba 2.2.3a, and CUPS 1.1.14. All the printers we have are networked printers sitting off of Linksys printservers. On this server I am sharing all off our printers out via Samba. See my smb.conf file below. This server works perfectly. All printers are shared out successfully. Primary CUPS server: [global] workgroup = NEW