similar to: Samba and "\\server not accesible; The network path was not found" error message

Hi, since I installed my linux server RH7.1 all workstations on neiborhood seem not to see network. here my testparm... please some help... jorge --------------------------------------------- [root@lecsys /root]# testparm Load smb config files from /etc/samba/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[public]"

Hi! I've got Debian 4.0 on an NSLU2 with Samba. The system is on an USB-Stick, the Samba share is on an USB-Disk. Copying files to the samba share make some problems here. I get a large delay before the transfer starts and I get timeouts with files larger than 150MB. I found out, that samba is writing a dump file on the disc before the transfer starts, which causes the delay/timeout. This

I'm trying to use Samba and FreeBSD 4.7-RELEASE to replace the Win2000 Server at work. On my test network I get the error: "The following error occurred attempting to join the domain "VINCENT": The credentials supplied conflict with an existing set of credentials." I've done some reading in the documentation as well as on this newsgroup. Obviously

Hi I am still in my begining steps with linux and samba. my system is 100MHz 128MB 4GB OS is RH 9.0 every time I tried to access my samba server called (linux) from my windows 2000 pro it gave me " the network path was not found " I can ping it and telnet to it no prob I ran testparm and the result 'll be below- I 'm waiting for your help guys ( I tried to clear the log as much

All attempts to connect to our Samba server, share "\data" from any Windows client fails. I'm trying to get samba to prompt the windows user with a login box, have them enter the samba username/password, then head onto the share. If I use in the address field the following: \\gaia\data /user:woellki a dialog box appears, with the username field greyed out "Gaia\Guest"

Hi everyone, I have a question about the logon script command. I've read and read and read the man page for smb.conf. In essence, I've duplicated the settings on the PDC how-to document to create a PDC with a logon script. However, when I log in, the scrips doesn't run. The only thing I don't have enabled, like the how-to, is roaming profiles. I'll include my smb.conf for

I know this subject has been beaten to death .. but I haven't been able to find a solution .. so here it is again: I can join the my Windows DOMAIN without issue. [djohns1@lmsprfc24208a djohns1]$ smbclient -L \\\\mspap01u added interface ip=192.168.240.53 bcast=192.168.240.255 nmask=255.255.255.0 added interface ip=192.168.131.1 bcast=192.168.131.255 nmask=255.255.255.0 Password: session

Hi, Thought I posted this already two weeks ago. Haven't seen any reactions yet, so I post it again We got the following problem here: Every now and then, users are unable to save Word or Excel documents on our Samba server. We already tried a couple of things: disabling oplocks, increasing oplock break wait time, putting the documents on a new share, ... but to no success so far. The

Hi all, I am sharing a directory by using SAMBA Ver. 2.2.3a on a HP-UX 11.11 for MS XP-Clients. Allthough conntecting works fine, I get the follwing log entry everytime a client connects: [2003/12/30 10:11:02, 0] smbd/chgpasswd.c:(939) check_plaintext_password: getsmbpwnam returned NULL smb.conf looks as follows: # Global parameters [global] coding system = client code page = 850 code page

Hi all, I have Samba 2.2.2 running on a Linux 7.1 box. 4 machines connected to a WinNT Server via a hub. The 4 machines are WinNT Server, WinNT Workstation, Win2000 and Linux running Samba Server. With Samba running (see testparm for samba configuration details) I can logon and access files on the Linux machine using the WinNT Workstation but cannot access the Samba server using the WinNT Server

Set { locking = Yes oplocks = No } I've had problems with Access and other MS Office files when oplocks are enabled, even on kernels that support them. HTH Glenn -- Glenn Scherb Midwest Research Institute 425 Volker Boulevard Kansas City, Missouri 64110 gscherb@mriresearch.org http://www.mriresearch.org <http://www.mriresearch.org/> Phone: (816)753-7600

I already posted this question some time ago, but no-one came with a solution or even a comment. Please, I really need this! So, I repeat: Configuration: Server: Mandrake Linux 9.1 box running samba 2.2.7 controling my home network A Windows 2000 Pro laptop, a few other Win and Lin boxes Problem: my wife has an existing remote domain account on her win2000 laptop, I want her to be able to

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have win2k pro SP2 client trying to save/retrieve roaming profile from samba 2.2.3a PDC. I followed the SP2 suggestion by throwing "nt acl support = no" to the profiles share, it didn't help. I tried to look for some other solutions on the newsgroup, no luck so far. Here is the scnario: 1. If a new user (not being loged on

I'm having some difficulties joining a Win2k workstation to a Samba domain. This particular workstation is my work laptop (DRUMMSW01) which normally operates as a member of a standard Win2k domain called BIZ. At windows startup/logon, BIZ is specified as the domain. At home, my Samba PDC's workgroup/domain is HOME.LAN When I try to browse shares on HOME.LAN with the Win2k laptop, I

I am using Samba 2.0.9 on S1 SuSE box and Samba 2.2.5 on S2 Suse box. S1 is acting as PDC for 98, NT clients. (logon script, shares from S1, and S2). Users's passwords are stored on S1, S2 uses security = server and password server = S1 options in smb.conf. I have upgraded both to Samba 2.2.8, but the logon script wants to connect to share from S2, it is prompted for a password. I have

Samba Guru's: I need whatever help you all can provide. I'm at my wits end here with this problem, I've checked forums and the Samba docs and can't find anything. Sorry if this email is long and drawn out. We just put in a new Solaris 9 server running Samba 3.0.11 to replace a Solaris 8 server running Samba 2.0.7. All the client desktops are running Windows 2000 joined to a

[global] coding system = client code page = 850 code page directory = /var/lib/samba/codepages workgroup = MICROVERSE netbios name = netbios aliases = netbios scope = server string = Samba Server %v interfaces = bind interfaces only = No security = USER encrypt passwords = Yes

First, I want to thank Mark Clement and Steve Litt for their comments. But as the subject indicates, i'm still not having any luck printing. Mark, I can't even get output to a test file. Below is a printout of testparm. One thing that *is* odd, is the reference to a "printers.def" file in /etc. There wasn't any such file there. The contents are a duplicate of the

Greetings, all: I'm having trouble working out a printing problem between my Samba box, and my Windows 2000 client. Here's the background: Network: Home network with a Slackware 8 box running Samba, 1 Windows 2000 client, 1 Windows 98 client, and a LEAF Project firewall providing Internet access. The Samba server should only be available to local clients. Systems: Slackware box:

Hi, after upgrading Samba 3.0.24 to Samba 3.5.4 a strange problem occurs: Users cannot anymore save files in MS Office (Word/Excel) on Samba shares. More precisely: Save as Office 2007 documents or RTF-Files works fine, but *.doc ist avoided with Error Message "Not enough memory". Of course there are lots of memory/space and ACL/Permissions should be ok since other file operations