similar to: Printing via smbclient to Windows BJC-2100 printer

First, thanks for the great work done on Centos 4.1. Recently installed on two systems that previously were running Windows 98 and Windows ME. (The user of the Windows ME system has no problems so far.) I was very surprised when Centos 4.1 recognized and automatically configured the BJC-2100 printer connected to the USB port during install. The only problem encountered so far is poor

Hi is there anyone out there, who managed to convince the Canon 2100 BJC-printer to cooperate? If so, how did you do it??

I am able to see my printer as a share. Well better put, I see four representations of my printer: ascii, lp2, lp-mono, and raw. I tried the naive thing and just selected lp2 and added the cannon bjc 4000 driver for NT. This didn't work. I get an error report: %%[ Error: undefined; offending Command: K ]%% . . . a bunch of strings that I don't understand. This does not look like the

Dear SAMBA Group, I've playing around with getting SAMBA to do things for me. I have an Ultra-1 running Solaris 2.6 and a Win-XP system with a Canon BJC-2000 printer attached to it. I'm trying to get the SUN to print to the printer on the XP box. I have followed various instructions but now when I print as "root" with "lp -d bjc <file>" I get an email message

Hello everyone, I did alot of searching before I came to post here, but have failed to come up with a reason why this isn't working. I may just be missing a major step. First, let me get the formailities out of the way. Redhat ES 3.0 Linux 2.4.21-4.ELsmp #1 SMP Fri Oct 3 17:31:21 EDT 2003 i686 athlon i386 GNU/Linux samba-3.0.10-1 I configured and installed swat so I could do remote

I am printing from linux to a printer attached to a win98 computer. I send a text file directly to the printer such as 'lpr -P BJC <file.txt>', the printer prints all the text as it should then fails to eject the last page and then goes off line. When I push the online button, it ejects the page and then is ready again. I am using a Cannon BJC4304. This printer supposedly can

Hello: I have this situation: I can make calls internally, I can make inbound calls but I can't make outbound calls. Thanks in advance. These are my devices: * asterisk 11.8.1 = 192.168.1.22 * sipphone grandstream gxp2160 = 192.168.1.5 * gateway audiocodes mp-114 2fxs-2fxo = 192.168.1.4 port 1 (FXS) connected to an analog phone port 3 (FXO) connected to the PSTN These are my

Sorry, I guess I should have been more specific, I am printing from linux to a printer attached to a win98 computer. When I say text I mean when I send a text file directly to the printer such as 'lpr -P BJC <file.txt>'. When I say 'hang' what I mean is that the printer prints all the text as it should then fails to eject the last page and then goes off line. When I push

̨Íåºê´ó¹ú¼ÊÉÌó¹«Ë¾³ÏÑ°¹óµØºÏ×÷»ï°é£¬ÏúÊÛµçÄÔ¡¢Åä¼þ¡¢ÊÖ»ú¡¢±Ê¼Ç±¾µçÄÔ¡££¨²Î¿¼¼Û¸ñ±íÈçÏ£© ÎÒ˾±£Ö¤²úƷΪȫÐÂÔ­×°,»õµ½¸¶¿î¡£Óв»Ïê¿ÉÀ´ÈËÀ´µç×Éѯ£º ÁªÏµÈË:³ÂÊÀ½Ü µç»°:013850704389 Ò»¡¢Ä¦ÍÐÂÞÀ­ µ¥Î»/Ôª T189--400 T190--350 T191--500 C289--550 T2988--350 A388--1600 A6288--1300 V70--2000 V8088--800 V998++ --700 V60+ --1200 V66+GPRS--950 ŵ»ùÑÇ 3310--400 3330--450

Hello, I am trying to setup a Grandstream GXP2160 IP-phone with secure calling (SRTP). Secure signaling SSIP for registration is working great ! I follow this guide : https://wiki.asterisk.org/wiki/display/AST/Secure+Calling+Tutorial But when I try to make a call with SRTP, I get stuck. There is an initial INVITE which is anwered with a 401. There should follow a new INVITE with a nonce,

Dear R devel, being constrained to a windows environment at work and having colleagues being accustomed to the Microsoft Office Suite, I was looking for a way to have the RweaveLatex driver for Sweave automatically generating 'win.metafile's in addition to the pdf graphics. Without this functionalilty, the generation of emf-graphics is quite laborious, I think: <<>>= plotit

I use R to create .eps graphics and then use oodraw to convert them to .emf versions. (One reason I do this is that OOo tends to re-size .eps files and I haven't found a way to stop it or change it once the graph is resized. .emf files are not distorted by OOo - fortunately.) I use a command like: > oodraw filename.eps & The gui opens and then I select .emf and do an export. I

syskern (`Functions for writing code that is OS and R/S independent', an amazing description given the reality) fails Rcmd check on Windows, and also gives incorrect information where it does work. There are already correct OS-independent functions for these purposes in R. It appears not to be needed to run the other three packages in the dse bundle, but to be the only R package that

I'm trying to setup a printer using Cups, using cupsaddsmb It uploads the files ok (smbclient ... -c 'mkdir W32X86;put ...;put ...') It adds the driver ok (rpcclient -c 'adddriver "Windows NT X86" "Canon:file1:file2..." (I have verified this worked from server properties in "printers and faxes" of the linux server: the driver "canon" shows

Dear all: Professor Ripley commented: > Note that libEMF's help page says > > It is also possible now to generate EMF files from PSTOEDIT > on POSIX > systems. Therefore, if your graphics code only outputs > PostScript, you > can now easily convert it to EMF. > > but that is only true on Windows (unfortunately). > Actually I have had some luck

I want to plot the unstadardized version of a normal plot.  Can you explain why that is not working? Dev.set(1) xcrit=-1.645 cord.x <- c(-3,seq(-3,xcrit,0.01),xcrit) cord.y <- c(0,dnorm(seq(-3,xcrit,0.01)),0)            # what does final 0 do here? curve(dnorm(x,0,1),xlim=c(-3,3),main='Normal PDF') polygon(cord.x,cord.y,col='orange')

Thank you David, That's a nice workaround using plotrix::barp(), but that doesn't explain why ylim doesn't work as intended (or at least, as I expect it to work), or why xpd has no influence when using devEMF::emf()... The problem with saving directly in RStudio is that it requires to manually save the plot, and this becomes troublesome when there are a lot of plot commands in a

Hello, I just finished to read chapter 22 of the samba howto. This chapter explains very well how printing from a win client via samba and cups work. If I understood it right, printing a file from windows to a non postscript printer via cups driver, samba an cups works like this: - application prints generating an EMF file ( windows spooler ) - the cups ( or adobe ) printer driver converts

I have FreeBSD 5.3 running on an Sun Ultra 10. I installed Samba 3.03, from patching SWAT now says version 3.07. I am having an issue printing from Windows through Samba to Savin copiers (model 9935DPE and 9945DPE) when downloading the Windows drivers directly from the [print$] share. When I print a test page, the orientation of the lettering is correct but the letters are gibberish. The

Hi, sorry for the simple question. I am usually able to change the font for PDF graphics with pdf.options(family="Times") However, I have found no way yet to get an emf file with a times font. I also tried a detour by using pstoedit to convert a pdf with the desired font to an emf but even there the font does not appear as times. Is there a way to get a times font in an emf file or is