similar to: INETD Question.

Hi. I'm getting messages to the effect: Inetd: /usr/local/samba/lib/nmbd: Hangup Last messages repeat 319 times I start samba from inetd. Should I be starting it as a daemon or starting it in init.d? If starting it as a daemon in in init.d, does someone have a script that can let me use? I'm running samba on an a Sun E450, with Solaris 2.7. Thanks. grant

Sorry if this is such a basic question but I couldn't find anything about this in the FAQs/HowTos/Digest. I've compiled samba-1.9.18p3 on SunOS4.1.3_U1. When I tried to run smbd via inetd.conf (SIGHUP), I always get the following on the console. inetd[590]: netbios-ssn/tcp: unknown service I've edited the /etc/services to add: netbios-ssn 139/tcp And the /etc/inetd/conf with

Hello Guys, First off let me say thanks for your efforts on Samba. Next I have a problem, I dled the samba 2.2.2 tarball and installed it and now I am at the configuration stage. It says I have to add two lines netbios-ssn lines to the inetd.conf file. Well, unfortunately there is no inetd.conf. However there is an xinetd.conf file is that the same thing and if so, what and where do I

I moved an entire RH 6.2 server from one CPU to a new one using a tape backup/restore. Everything from the old server is working on the new server, but when SysV starts up smb, the nmbd daemon (2.0.6) exits with an error: create_subnets: No local interfaces! eth0 has already started according to the logs and console. Any ideas? Thanks. ______________________ Greg Kelley, IT Director SSA, EAA,

I can run nmbd successfully, but smbd dies almost immediately when I run it, the smbd.log file has the message "bind failed on port 139 socket_addr = 0.0.0.0.". When I do a netstat -an | grep 139, it shows that tcp is listening on port 139. How do I resolve this conflict between tcp and smbd?

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: Daniel Bennett (NQL).vcf Type: application/octet-stream Size: 383 bytes Desc: not available Url : http://lists.samba.org/archive/samba/attachments/20020816/fbcd8db3/DanielBennettNQL.obj

Hi, Samba world: It is my first time to use samba to share a folder from a solaris 7 to our windows 2000 clients. After I have the following, I could not see the unix share point. Your help is highly appreciated! 1) Install samba 2.0.5. 2) done the following: Edit /etc/services and make the following changes. Immediately after the line which reads: sunrpc 111/tcp rpcbind

I have the default installation of samba (2.0.5) that came with Caldera OL 2.3, but it doesn't seem to be starting up properly, nor is SWAT working. When I run the script 'samba start', I get the message "Starting samba: smbd nmbd", but when I check the running processes, only nmbd shows up. Running smbstatus gives me the message "Couldn't open status file

Hi, I have a problem in accessing samba server from NT network neighbourhood. I can see the samba server icon on neighbourhood. But while trying to access then it's asking for user name & passowrd. I am not using local user & password from unix box rather it should be authenticated from NT PDC and accordingly I have modified the smb.conf file. Here is the sample of that. 103 flara %

Help me ! I cannot start smbd, it immediatly stops, I've got in my log.smb [1999/05/19 14:53:43, 0] lib/util_sock.c:open_socket_in(709) bind failed on port 139 socket_addr=0.0.0.0 (Adresse déja utilisée.) And then It stops, I cannot launch smbd. I my /etc/services, I've got the two lines : netbios-ssn 139/tcp netbios-ns 137/upd and in /etc/inetd.conf netbios-ssn stream tcp

David Allan Finch wrote: > Has anyone considerd modify the Unix encypt to use > the same system as NT. IE the encypted pasword in the > /etc/passwd or NIS/NIS+ table is the same for both? Err. That would be a *really* bad idea. See the l0phtcrack source for details :-). Seriously, though. The password hashes used on NT are very poor. They don't use salt and people are now

Hi, For no particular reason, my Samba service didn't start yesterday, when I went to start it by going in the /usr/local/samba/sbin and then typing SMBD I got an error "permission denied" and something about the port 139 (sorry I don't have the whole error message) No changes were made on the box. I started looking over the web and I found an something out something to

Dear list; I have been using samba 1.9.18p10 on a Sun Sparc Ultra 2 for about a year. I use it to share a directory to an NT/95 network. I now have a Sun Sparc Ultra 10 running Solaris 2.6. In order to prepare the Ultra 10 for y2k I downloaded samba-2.0.6-nonis+-sparc-sun-solaris2.6.pkg.gz from

Hello, I'd like to see if I can get some clarification on what is the preferred method of starting the Samba daemons (note that we are using Solaris, not Linux). This is something that I'm not able to find any explanation of in any of the Samba 3 documentation that I've looked at so far. In Samba 2 I would have the Samba daemons started up by the following in my /etc/inetd.conf:

Hi people, Is there somebody who knows how to install SAMBA 2.0 on Solaris 2.6? Thanks, Rivaldo

I've been running Samba3.0.21a on two AIX5.3 servers for several weeks with no major problems. Today, one of the servers stopped working. I received the following message from Windows when I tried to access one of the share drives: An error occurred while reconnecting T: to \\wara01\TSMreports Microsoft Windows Network: This local device name is already in use This connection has not

I have tried to set up Samba on my Solaris 2.5.1 with 2 interfaces (le0, le0:1 - one network card with two IP addresses). But all I could see is throught the default ports 137 and 139. In my /etc/inetd.conf, I have: netbios-ns dgram udp wait root /opt/samba/bin/nmbd nmbd -s/opt/samba/lib/kes.smb.conf netbios-ssn stream tcp nowait root /opt/samba/bin/smbd smbd -s/opt/samba/lib/kes.smb.conf

Hello, we would like to use rsync (2.6.2 manualy patched and recompiled) in daemon mode spawned by inetd (Solaris 5.8 Environment). /etc/services: rsync 1234/tcp #RSYNC daemon /etc/inet/inetd.conf: rsync stream tcp nowait publish /usr/bin/rsync rsyncd --daemon --port 1234 . Alas, this does not seem to work, there is the following error message in the log file:

Hi. I don''t know if this one is known, but I can''t recall seeing anything about it. If it is old news I apologize. I discovered a bug in the inetd that comes with NetKit-B-0-08 and older. If a single SYN is sent to port 13 of the server, inetd will die of Broken Pipe: write(3, "Sun Jan 12 21:50:35 1997\r\n", 26) = -1 EPIPE (Broken pipe) --- SIGPIPE (Broken pipe) ---

Dear all, I regret that I am very new to this tool from the install side. I have so far altered shares on a running machine only. I have (thanks to Joss for some help already) installed version 3.4.3 under AIX 6.1 giving it our preferred base directory of /opt/freeware/samba/3.4.3 I have copied over the smb.conf file from the source machine (AIX 5.2 / Samba 2.0.7) and tweaked the content of