similar to: samba over networks

Hi, I want to connect to a share on a Samba server over the Internet. I have the Samba server installed and working OK (for NT clients at least) but when I connect from my NT workstation over the Internet I get 'Invalid Handle' dialogs when I try to map a network drive. I think it should be OK but one major difference is the remote NT workstation is not a member of the domain in which

Hello Family, (smd.conf file attached) Having had great success with 2.2.2 and my Linux box and Windows-2000 machines I switched to CUPS and now can't print again having made some slight edits in my smb.conf file (attached) for the change to CUPS. [1] I have to reloaded all the Windows drivers again on the Windows-2000 machines and still get the "Startdoc..." error. [2] The

Hi, I'm having some problems with Samba 1.9.16p11 on a Sun3/60 running NetBSD 1.2. I have a Win95 client and a couple of DOS clients on a single ethernet segment (it's at home :-). I've set up a simple configuration, intention was just to serve files from the Sun to the PC's. Everything works perfectly except authentication from the Win95 client. I can connect to the Samba shares

I have an Epson Stylus Color 880, connected to our network via an external ethernet printserver. I used to run lprng on the samba server (which is a domain controller), and the Windows clients had one minor problem accessing this printer via Samba (2.2.3a, then): Every time a client wanted to print, the Epson status monitor on the client would complain about communication problems with the

Hi, I've a problem with Samba 3.0.1: printing with cups works fine when I install the driver on windows (2000/NT) manual. But setting up a print$ share for downloading the drivers on the fly doesn't work. I installed the drivers with cupsaddsmb, which seems to work fine. No error is shown (even with -v). When I try to install the driver on windows it says that the server hasn't any

Hello, I've tried both samba-3.0.0beta2 and beta3 but both give me the same problem. When on a windows dekstop and trying to add a printer with samba as the printserver , the printers exported by the samba server are not seen by the windows "add printer dialogue" e.g.: relevant part of smb.conf: ----------------------------------- load printers = yes printing = cups

Hello, I've tried both samba-3.0.0beta2 and beta3 but both give me the same problem. When on a windows dekstop and trying to add a printer with samba as the printserver , the printers exported by the samba server are not seen by the windows desktop. e.g.: relevant part of smb.conf: ----------------------------------- load printers = yes printing = cups printcap name =

I have SuSe 7.0 newly installed, with default/networking packages installed. It is installed on 2nd partition (Win2k on starting cyl's) and use floppy to boot Linux. It is a 333MHz Celeron, 128Mb Ram, 30Gb drive 1/2 for win, 1/2 for linux - lots of room =) I have a Kingston EtheRx KNE100TX adapter, running CAT5 to a LinkSys BSFR41 Cable/DSL router. The only way i could get the network to run

Hi, After using the client driver for a long time, I want to give a try to the drivers installed on Samba server. I am using the how-to at http://us1.samba.org/samba/docs/man/Samba-HOWTO-Collection/classicalprinting.html It goes fine up to "installing drivers into [print$] using APW". I can see a list of drivers files growing into W32X86. But when I try to access the properties of a

I have a problem I hope someone can help with. I have TLS 6.0 set up to provide print services to Win98 clients using samba. There are two printers, an HP LaserJet 4050 and an HP DeskJet 950C, both attached to separate JetDirect 170 print servers. The HP4050 works wonderfully, no problems at all. The 950C doesn't work. The printer is available when browsing and can be installed on the

Hai, Lately I am encountering a weird issue with spool queue under winxp and samba+cups. It seems winxp puts all the information of printjobs spooled to a given printer exported with samba in its local printer spool queue of that printer (allso of other users in the domain) and never marks them as done/expired . After a certain amount of time there are so many jobs in the queue the workstation

Hai, Lately I am encountering a weird issue with spool queue under winxp and samba+cups. It seems winxp puts all the information of printjobs spooled to a given printer exported with samba in its local printer spool queue of that printer (allso of other users in the domain) and never marks them as done/expired . After a certain amount of time there are so many jobs in the queue the workstation

We are having great problems printing from XP clients through our Samba server. We are using the Adobe PS driver, and are configured for automatic driver download/install from the server. Samba is 2.2.8a and part of a Suse OpenExchange server, printing is through CUPS. Printers are an assortment of different makes of Postscript (and compatible) lasers. Basically, we have 'wierd'

-----BEGIN PGP SIGNED MESSAGE----- ******************************************************************** The contents of this email are intended exclusively for the addressee. If you are not the addressee you must not read use or disclose the email contents ; you should notify us immediately [ by clicking "Reply" ] and delete this email. Nationwide monitors e-mails to ensure its systems

I've the same problem on solaris 8 with samba 2.2.8a i've try many options like theses: socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_SNDBUF=16384 SO_RCVBUF=16384 read raw = yes write raw = yes oplocks = no getwd cache = yes Add this on your global section and try to see if you get improvement Envoy? par : samba-bounces+xavier.droniou=rte-france.com@lists.samba.org Pour :

Running RH6.0 I am able to print just fine from linux, the problem now is getting smb printing working. I am using an Intel Netport Express PRO/100 printserver. Previous to my upgrade from RH5.2 when I had the printer directly connected to the samba server, I was able to print just fine from the windows client machines (not using the raw method) My /etc/printcap is as follows ##PRINTTOOL3##

Hello, found no answer for the following elsewhere setting up samba on a Debian box: The printer is seen on the net from the clients but no printing is possible. $ smbclient -L pichuco Domain=[TANGO] OS=[Unix] Server=[Samba 3.0.10-Debian] Domain=[TANGO] OS=[Unix] Server=[Samba 3.0.10-Debian] Anonymous login successful Sharename Type Comment --------- ---- ------- public

Hay all. I've been setting up a linux gateway with an ADSL connection and three windows boxes in a home network. Everything has gone smoothly with Red Hat 9 and data transfer rates have risen due to having a linux gateway instead of an Windows XP gateway. However, I've had horrible problems setting up network printing. I've got Samba set up and that is working fine with various

Hello list, I am at the hair pulling stage of this game right now. Having read through many of the posts, I still seem to be unable to get my samba server to allow anonymous connections ( or any connections for that matter ) from windows machines. All I want to do is have printers and one folder shared, all as guest accessable. I have made the security level = share and made the shares

Hi, in my network are two locally subnets. Now I want to print from one subnet (loc_110) to the other subnet (loc) where a printer server (192.168.111.5) is working. My printer server is from the d-link company. First in "/var/log/messages" was an entry that there was dropped traffic from source 192.168.110.x port 721 to 192.168.111.5 port 515. Ok, now I''ve created a rule,