similar to: iscsi-initiator-utils required in 5.6, loads uneeded modules

Hi list, I had setup my xen box with bond in active-backup mode. I had install open-iscsi as initiator to attach an external iscsi san to my box but open-iscsi didn''t work. When i run this command: #iscsiadm -m node -T iqn.2008-03.local.foo:iSCSI.test.disk1 -l I retrive, after some seconds, this error Logging in to [iface: iface0, target: iqn.2008-03.local.foo:iSCSI.test.disk1,

Dear Srs, I'm getting this error when trying to connect to a Infortrend A16E- G2130-4 storage v?a iSCSI. > Apr 29 10:24:40 vz-10 kernel: scsi1 : iSCSI Initiator over TCP/IP > Apr 29 10:24:41 vz-10 kernel: Vendor: IFT Model: A16E- > G2130-4 Rev: 361F > Apr 29 10:24:41 vz-10 kernel: Type: Direct- > Access ANSI SCSI revision: 04 > Apr

Hi all, I have the strangest problem on one of our backup server. iscsi doesn't start at all, and gives the following error: [root at 2U-NAS ~]# /etc/init.d/iscsi status iscsid is stopped [root at 2U-NAS ~]# /etc/init.d/iscsi start iscsid is stopped Starting iSCSI daemon: Unable to create pid file: /var/run/brcm_iscsiuio.pid [FAILED] Setting up iSCSI targets: iscsiadm: No records

CentOS Errata and Bugfix Advisory 2011:1033 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1033.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 615f3d7741c85ddb841d0a69e0fe1370 iscsi-initiator-utils-6.2.0.872-10.el5.i386.rpm Source: 341bd948d4ab8411aba94e233ee34169

CentOS Errata and Bugfix Advisory 2011:1033 Upstream details at : https://rhn.redhat.com/errata/RHBA-2011-1033.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: a3f46dc9c8433197ebf876a428739989 iscsi-initiator-utils-6.2.0.872-10.el5.x86_64.rpm Source: 341bd948d4ab8411aba94e233ee34169

Hello all, I got some severe iscsi connection loss on my dom0 (Gentoo 2.6.20-xen-r6, xen 3.1.1). Happening several times a day. open-iscsi version is 2.0.865.12. Target iscsi is the open-e DSS product. Here is a snip of my messages log file: May 5 16:52:50 ying connection226:0: iscsi: detected conn error (1011) May 5 16:52:51 ying iscsid: connect failed (111) May 5 16:52:51 ying iscsid:

Hi All, I'm running KVM host on CentOS 5.6 x64, all of my guests are CO 5.6 x64 as well. I create / run VMs via libvirt. Here are the packages I have: # rpm -qa | egrep "kvm|virt" kvm-83-224.el5.centos python-virtinst-0.400.3-11.el5 kvm-qemu-img-83-224.el5.centos kmod-kvm-83-224.el5.centos libvirt-python-0.8.2-15.el5 etherboot-zroms-kvm-5.4.4-13.el5.centos libvirt-0.8.2-15.el5

Hello all. We recently purchased HP Proliant DL380 G7 server and also a HP Lefthand P4500 G2 24TB iSCSI box. The server itself has Quad Ethernet based on the BCM5709 Chipset from Broadcom (NetXtreme II). My main question is about iSCSI offload mechanism, as iSCSI itself is pretty new to me but I have gotten a good hold on it tho. I have managed to setup and configured our Lefthand box into

Hi, i have a debian Etch x86_64 with a xen 3.1 on a kernel 2.6.18-xen. I have some DomU with Debian Etch. I installed open-iscsi, configure /etc/iscsi/iscsid.conf: --- node.active_cnx = 1 node.startup = automatic #node.session.auth.username = dima #node.session.auth.password = aloha node.session.timeo.replacement_timeout = 120 node.session.err_timeo.abort_timeout = 10

Hi. Here is the short version: If dom0 experiences a short (< 120 second) network outage the guests whose disks are on iSCSI LUNs get (seemingly) unrecoverable IO errors. Is it possible to make Xen more resiliant to such problems? And now the full version: We''re testing Xen on iSCSI LUNs. The hardware/software configuration is: * Dom0 and guest OS: SLES10 x86_64 * iSCSI LUN on

Greetings ocfs2 folks, A client is experiencing some random deadlock issues within a cluster, wondering if anyone can point us in the right direction. The iSCSI connection seemed to have dropped on one node briefly, ultimately several hours later landing us in a complete deadlock scenario where multiple nodes (Node 7 and Node 8) had to be panic'd (by hand - they didn't ever panic on

Package: xcp-storage-managers Version: 0.1.1-2 Severity: important Dear Maintainer, I can not create an iSCSI storage resource using the following command: xe sr-create host-uuid=<my-host-uuid> content-type=user name-label="LVM over iSCSI SR"> shared=true device-config:target=192.168.10.100 device-config:targetIQN=<here-target-iqn>

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

On 12/22/2013 10:09 AM, Marco wrote: > On 2013–12–21 John Ferlan wrote: > >> On 12/17/2013 07:13 PM, Marco wrote: >>> Hi! >>> >>> I'm new to libvirt and face problems connecting to an iSCSI target. >>> What I intend to do is to connect libvirt (I tried virt-manager and >>> virsh) to an iSCSI target and then boot from the LUNs which

Hi all, I have a Dell server running cent 5.6, new install, connecting to an IBM DS3500. I have configured iscsi connections using iscsid and can log into the targets on the IBM. I can also mount the LUNs when accessing them from their active controller path. When I throw multipath into the mix, it fails completely. Multipath is working, when I run multipath -ll it shows me the correct active

Hello, I have been using Xen now for several months and have been quite successful until attempting to utilize iscsi within my domU''s. My research has turned up many posts of people using iscsi with no problems, and I have found no others with the problem I seem to be experiencing. If this has been covered on this list in the past, please accept my humble apologies. Configuration:

hi llvmdev list im currently investigating a missing optimizer feature in VS2010 - and comparing the VS2010 results with the result of clang 3.1 i've downloaded clang from http://llvm.org/releases/download.html -> Experimental Clang Binaries for Mingw32/x86 clang --version clang version 3.1 (branches/release_31) Target: i686-pc-mingw32 Thread model: posix ----- test.c typedef

addition to my last post: http://groups.google.com/group/llvm-dev/browse_thread/thread/afd85c3f303ec2a9 i know that using static on my globals will remove them - no other compilation unit can then extern the vars but my question is - in this closed szenario clang is "directly" producing the exe - isn't clang aware of that the vars are not in use? btw: the microsoft compiler

On 2012-07-05 12:53, Dennis Luehring wrote: > addition to my last post: > http://groups.google.com/group/llvm-dev/browse_thread/thread/afd85c3f303ec2a9 > > i know that using static on my globals will remove them - no other > compilation unit can then extern the vars > > but my question is - in this closed szenario clang is "directly" > producing the exe -