similar to: Dell R605 w/ Perc 6/i problem

Does anyone know if a PERC H200 is a real RAID controller? I'm about to build a box to CentOS 6.5 (it was Windows...) with RAID 6 on Monday, and this PE R610 has this.... I'm familiar with PERC 6 and 7s, but just dunno 'bout this one. mark

I've got two drives from a now-dead server, they were RAIDed, a mirror, I'd assume. I need to see if there's anything on them I need to transfer to the replacement, so I just shoved them into another Dell server, with a PERC 5 controller - I think that's what the dead one had. I fired up MegaRAID storage manager... but can't see any way to tell it to recreate that RAID. Anyone

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

Hello, I'm curiuos if anyone knows if it's possible to set up a Dell R515 (which has PERC H700) to be JBOD. It seems the only options are RAID0 or RAID1. I read posts, where people say it can by done by making each disk its own RAID0.? This works, but it wigs out when that disk is removed, and forgets a disk was ever there (unless I go back in the PERC and fix it). My plan is to have a

we have several R900 servers with PERC 6/E card in it. Recently it we getting some message on /var/log/message say change to "write back" and change back to "write through". We figure out it is PERC 6/E card battery weak. My questions are: 1. some battery only use one year (some even shorter) and already this problem. 2. How come PERC 5/E does not have this issue? 3.

Hello, Is the dell perc 4dc raid card supported by centos 4 and does it work reliably? thanks Jon

I am looking at using a dual Xeon Dell 1850 with a PERC 4e/Si raid controller. Is anyone using these in production right now? If so can you share some of your experiences? Thanks, Geoff

I'm trying to use the Dell/Redhat CLI to manage a pair of mirrored disks in a Dell PowerEdge 2650 but I get: FASTCMD> open afa0 Executing: open "afa0" Command Error: <The driver could not execute the requested IOCTL SENDFIB, 22=Invalid argument.> I have "options AAC_COMPAT_LINUX" in the kernel config and dmesg shows: aac0: <Dell PERC 3/Di> mem

I'm having an issue install FreeBSD 10.0 on a Dell PowerEdge w/ the Perc H730P raid controller. I see there has been support added for the controller in the stable version using the mrsas driver. But when I boot up in the installer... it is still trying to use the older mfi driver. How do I get the installer to properly recognize the raid controller? Are there any logs I can provide to help

I''ve got Solaris 10 U6 with a ZFS boot/root installed on a Dell 1850 here, patched up as of this morning (kernel 141415-10). The system is running with hardware-mirrored disks, via the LSI MegaRAID controller, a PERC 4e/Si. 4G of RAM, one dual-core 3.4GHz CPU. The system is a simple mail hub, and it does the task very well. Most files exist only very briefly, and thus rarely touch the

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

I am trying to help a friend with a 2850 and snmp monitoring of a controller and its arrays. I don't have any dells, do they have a rpm to make easy work of this for the Percs? They have a monitoring solution already. Any hints I could pass on would be appreciated! Thanks, jlc

Hi folks: At work, I have an R510, and R610 and an R710 - all with the H700 PERC controller. Based on experiments, it seems like there is no way to bypass the PERC controller - it seems like one can only access the individual disks if they are set up in RAID0 each. This brings me to ask some questions: a. Is it fine (in terms of an intelligent controller coming in the way of ZFS) to have the

We're looking for tools to be used in monitoring the PERC H800 arrays on a set of database servers running CentOS 5.5. We've installed most of the OMSA (Dell monitoring) suite. Our current alerting is happening through SNMP, though it's a bit hit or miss (we apparently missed a couple of earlier predictive failure alerts on one drive). OMSA conflicts with mega-cli, though we may

We are currently running CentOS 4.5 on older Dell Systems. We are upgrading to Dell PowerEdge 1950 with a PERC 6/i raid controller. CentOS 4.5 installation does not see the PERC 6/i controller. Dell and LSI Logic only support RHEL 4U6 and higher and SuSe. I've tried building the boot images with the new driver for installation but kickstart still doesn't see the raid controller.

Hello Sa?o! I found you here: http://mail.opensolaris.org/pipermail/zfs-discuss/2012-May/051546.html "How about reflashing LSI firmware to the card? I read on Dell''s spec sheets that the card runs an LSISAS2008 chip, so chances are that standard LSI firmware will work on it. I can send you all the required bits to do the reflash, if you like." I got Dell Perc H310 controller

Hello All I read this thread Resilver/scrub times? for a few minutes and I have recognize that I dont know the different between Resilvering and Scrubing. Shame on me. :-( I dont find some declarations in the man-pages and I know the command to start scrubing "zpool scrub tank" but what is the command to start resilver and what is the different? -- Best Regards Alexander Dezember, 20

In the past I basically used 3 partitions for hard drives. partition 1: was all centos (typically 20G) partition 2: was swap (typically 2*RAM - 2G) partition 3: was everything else I wanted, needed or carded about, database files etc... Now with really big drives coming along 750G and 1T partition 3 is getting big. Except for time to format is there a problem with that??? I'm not really

From: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Scrubing supers is not in a transaction context, when trying to write supers to disk, we should check if we are trying to scrub supers.Fix it. Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> --- fs/btrfs/disk-io.c | 2 ++ fs/btrfs/transaction.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/fs/btrfs/disk-io.c

Hi, We bought a new Dell PowerEdge 2950III with Perc 6/i and have the disk geometry problem using 6.3 final or 7.0 RC1. Seems that we are not alone at least one guy has similar problem reported earlier: http://unix.derkeiler.com/Mailing-Lists/FreeBSD/questions/2008-01/msg00506.html I was reading the mailing list and found that some of the people are happily using this hardware with the latest