similar to: ethernet outages C5.4

Hi, This patch intends to accurate vcpu weighting for CPU intensive job. The reason of this problem is that vcpu round-robin queue blocks large weight vcpus by small weight vcpus. For example, we assume following case on 2pcpu environment. (with 4domains (each domain has 2vcpus)) dom1 vcpu0,1 w128 credit 4 dom2 vcpu0,1 w128 credit 4 dom3 vcpu0,1 w256 credit 8 dom4 vcpu0,1 w512 credit 15

Here are some more messages that pop in the server logs when I try to read folders on a Win2K file server - the folders/files were saved from a Macintosh on the network: smb_proc_readdir_long: name=\Font Library\B\Bernhard BoldCond. et al?\*, result=-2, rcls=1, err=123 smb_proc_readdir_long: name=\Font Library\K\Kino, et al?\*, result=-2, rcls=1, err=123 smb_proc_readdir_long: name=\Font

Hi everyone, I need your help. I would like to create a front-back architecture with Xen. My physical server has only one public Interface. Currently, my DOM0 is using the network-route configuration: *(network-script ''network-route netdev=eth0'') (vif-script vif-route)* My DOM1 is configured with a public IP + proxy_arp with DOM0. DOM1 can connect any address on

Hi I have a couple of questions: 1. How do I exist from a domU console back to dom0 console (after issuing xm console [domU])? 2. How do I setup a dom0/domU in order to get a tty login? TIA Paolo _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I'm running samba-3.0.22, linux-kernel-2.6.16 and I'm having troubles with trusted domains. How can I find the suitable DC for each domain? Could be a resolution issue? Bellow my smb.conf and some tests. [global] workgroup = DOM1 netbios name = localhost server string = LOCALHOST Server security = ads realm = MYDOMAINCONTROLLERREALM

Hi All, When tried to pass through 2 mpt2sas HBA to hvm guest, hvmloader paused with below: MPT BIOS Fault 09h encountered at adapter PCI(00h,04h,00h) Press any key to continue... Checked related codes and mostly like it caused by rombios did not loaded MPT BIOS properly, and lead MPT BIOS failed to bootup. config-file of the guest as below: ---------------------------------- # cat vm.cfg

Hi all, My NT environment cannot recognize my SAMBA servers(Bad IP address when ping from MS DOS prompt) and after I restarted the nmbd daemon it can see my SAMBA servers. Does anyone know why this happens? Is it there is a change in the WINS server's database? Please advise. thanks & regards, Bridget

Hi I am trying to stablish a relation between two different Samba domains. Each domain has two PDCs, all they are WINS servers, and the two domains are in different subnets. They are configured to use LDAP as the user/group/machine database. First, I will create the relation, being DOM1.CORP the trusted domain, and DOM2.CORP the trusting domain, so in a server of DOM1.CORP, I create a user this

Hi, I want to add 2 vlans by the following steps: 1. add the vlan interfaces: vconfig add eth0 100 --vlan100 vconfig add eth0 101 --vlan101 2. modify the network-bridge script by the websit, http://wiki.xensource.com/xenwiki/XenNetworking#head-04ebcc1760dbc4678e83b116afa310dc0612dc39 Comment each time ifup or ifdown commands are executed.The reason is that ifdown ends with

Hey folks! I'm doing some %pre work for the first time in a very long time, and have been at this all day so far and still don't have anything sorted out properly. First I tried just doing some simple bash stuff like this %pre #!/bin/bash # stuff I reduced "stuff" down to basically a simple "select" statement to echo and read input, just for the sake of debugging.

Hi,all, I cannot get my network in domain1 work. Here is my configuration: in dom0: I have two network cards, the ip addrs are 141.213.10.110 and 192.168.0.4, respectively. 141.213.10.110 is an external IP and can access internet directly. The gateway should be 141.213.10.1. /etc/xen/vfp: the domain1 configuration file, I created domain1 using ''xm create vmid=1 -f

Good morning, I am new to Xen, and trying to understand how Xen works. I have some questions about virtualization of interrupts on Xen. Thanks in advance for all helps. 1) From papers about Xen architecture found at Xen homepage, Xen seemingly intercepts interrupts of Dom1 (paravirtualization). So interrupts occur in Dom1''s context are sent to Xen, and Xen handles them. Is that correct?

Hi, well once u try lot and no good result is time to ask. My friends I want to make to domains running samba+ldap to share resources, I want to create a trust relation in two directions. Both domains have wins enable but are on different subnet. Domain Name: DOM1 Netbios Name = DOM1PDC 192.168.50.0/24 Domain Name: DOM2 Netbios Name = DOM2PDC 192.168.40.0/24 Both networks are separate,

> > > My friends I want to make to domains running samba+ldap to share > resources, I want to create a trust relation in two directions. Both > domains have wins enable but are on different subnet. MUST use the same WINS server for trusts to work. Why have two domains? > > > > Domain Name: DOM1 Netbios Name = DOM1PDC 192.168.50.0/24 > Domain Name: DOM2 Netbios

I hope someone can answer this since my other emails have gone unanswered. I am using Samba 3.0.7 on both machines and am using LDAP. I believe that the trusts are working but I am still having a slight problem. I guess we'll use DOM1 and DOM2 for the domain names. DOM2 is trusting DOM1. If a DOM1 user tries to locally login to a DOM1 computer, it gives a "System could not log you

Hi, I tried to configure the new idmap interface. Currently without much success. I have two samba domains, trusting each other. Each PDC using it's own LDAP server. I tried idmap domains = DOM1, DOM2 idmap config DOM1:default = yes idmap config DOM1:backend = ldap idmap config DOM1:ldap_base_dn = ou=Idmap,dc=dom1,dc=mydomain,dc=de idmap config

I have noticed the following behavior when testing out Samba 3.0.1 on RH9 with ldap authentication. Linux Samba V3.0.1 set up as PDC for domain DOM1 has a user test1. Two NT4 domains DOM2 and DOM3 also have a user called test1 with the same password as the user in DOM1 (all three users have the same username and password). All servers are on the same local subnet. When user1 does a logon to

Hi, I have some problems with the following setup: DOM1 (PDC) -> DOM2 (PDC) <->DOM2(Member server) The users and groups from DOM1 (MS WinNT4 domain) are nicely visible on Samba PDC (DOM2) with established trust, but domain member server in DOM2 domain does not show any users from the DOM1 domain (only users from DOM2 are visible), BUT!! users from DOM1 can login to it and access shares

Hi, Right now, the unprivileged account for privilege separation is only configurable at compile time (SSH_PRIVSEP_USER). I'd like to ask if it would be acceptable to have the account runtime configurable by adding something like PrivilegeSeparationAccount foo to sshd_config. The reason I'm asking is this. I'm working on a long overdue change to Cygwin which is supposed to get

Hello all, When I try to add a user to my secrets.tdb file on my Samba 3.2.0 PDC, the users are always added under the local machine domain, not the global domain. That is, if my PDC machine name is srv1, and it is PDC for the domain DOM1, then whenever I add a user using "pdbedit -a -u username", then that user gets placed under the local domain SRV1, not the global domain DOM1. So my