similar to: poweredge 1950 hangs at starting udev

Hi all, Curious issue.. looking in to how much disk space is being used on a machine (CentOS 5.3). When I compare the output of du vs df, I am seeing a 12GB difference with du saying 8G used and df saying 20G used. # du -hcx / 8.0G total # df -h / Filesystem Size Used Avail Use% Mounted on /dev/xvda3 22G 20G 637M 97% / I recognize that in most cases du and df

Hi all, I can't seem to get my fonts to look decent under CentOS. I was able to make them look pretty good under Ubuntu, but for the life of me I can't make them look decent on CentOS. Screenshots: http://img199.imageshack.us/img199/8563/ss1rzo.jpg http://img199.imageshack.us/img199/7655/ss2ocf.jpg http://img196.imageshack.us/img196/6040/ss3j.jpg

As part of patching a cluster which has two DL580G5 login nodes ( 4X Intel 7300 DC cpus) & 24 HP DL160G5 compute nodes ( 2x Intel 5272 DC cpus) we encountered an issue that I would like to record: I upgraded both DL580s to Centos 4.7 via yum but only rebooted one initially- this node, previously bomb-proof, started to hang randomly with no obvious messages logged to help with diagnosis.

> -----Original Message----- > From: Christopher [mailto:chris.robinson@voipsupply.com] > I see that there is a lot of discussion on the web about a > common error > after installing and modprobe'ing the zaptel driver. However I don't > see any resolution, anyone found a solution? > > Here's the output I get after modprobe: > > Uhhuh. NMI received.

Hi all, I've struggled for several days trying to get a Digium TDM04B 4-port wxfco card working on a Dell 1U PowerEdge 750 machine running Fedora Core 1. I finally got a call back from Digium who indicated that there is a fundamental conflict between the card and the PowerEdge having to do with PCI interrupts. Asterisk version is stable v1-0 12/29/04. The symptoms of the problem were as

Nov 12 08:54:27 steerpike kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0. Nov 12 08:54:27 steerpike kernel: You have some hardware problem, likely on the PCI bus. Nov 12 08:54:27 steerpike kernel: Dazed and confused, but trying to continue Would my Digium TDM410P cause an NMI, or is my computer failing? - Mike

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hi All I'm having some serious kernel panic while using digium cards. It may be related to IRQ shared. Can this cause a lot of drop call and bad voice quality ? Do you guys know if there is a way I can assign one IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [

Hello, Is it possible to get the name that was set in a VM's xen config file from the guest machine? I'm interested in having my kickstart launch a script that can configure hostname, but to do that it would need to get the name set in the config. Thanks, Ryan

Hi, I''m using xen 3.3.1 with kernel 2.6.18-8-xen x86_64 compiled with pcibackend support and VT-d activated on a HP dc7900 (Q45 chipset). I''m trying to use a pci acquisition card (NI-6221) in a windows XP HVM. Device is recognized under XP and look functionnal until I try to use it. If I try to acquire data or generate a signal (with National Instrument official tools) nothing

G'day, I am testing a new server with a Supermicro X7SBA motherboard and TE405 cards. When I load Dahdi and run dahdi_cfg I get the following errors: kernel: Uhhuh, NMI received for unknown reason b1 on CPU 0 You probably have a hardware problem with your RAM chips Dazed and confused, but trying to continue The reason codes I have seen are a0, a1, and

Dear all, since it could be of interest for the list, here I post a link to compiled kernel for XEN 3.1 on a DELL PowerEdge 1950 compiled with gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21) on a Debian4 distribution. This is provided AS IS AND WITHOUT ANY SUPPORT AND/OR ANY RESPONSIBILITY :-) The first link (7 MB) pack all the files you should have in /boot. The second link (12 MB)

Dear Zaptel and wcfxo devellopers, Hi, so far I have had no success moving this issue forward. Carl Andersson has been kind enough to help build various kernels to try, but with no success. So, I have tried to debug the problem directly. So far I have applied the patch below to wcfxo.c. (on the latest CVS head) This makes my system stable again (in that I dont have to keep pressing the big

http://bugs.freedesktop.org/show_bug.cgi?id=14391 Summary: nouveau lockup on NV44 / x86_64 Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: wwoods at

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

I have just noticed this message in my kernel logs, reporting the possibility of an error with my memory. This would go a long way towards explaining the problems i''ve been having. This particular error is occuring when i''m not running xen so is obviously not something brought on by xen itself. The strange thing is that the NMI error is always followed by the TLAN: eth0: Adaptor

Hello all, I have a PowerEdge 2950 that I am using to host Windows XP VM's under CentOS. I am experiencing poor performance in the Xen VM's. Any time I try to do something, the CPU usage (as reported by the Windows task manager) hits 100% for a few and then drops back down. This is causing the VM's to run sluggish and be quite annoying to use. Example.. I click IE.. cpu hits

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

There is a lot of talk about the vulnerable Linux kernel. I'm simply wondering the telltale signs if a given system has been hacked? What, specifically, does a person look for? Thanks. Scott