similar to: question about software Raid 1

created 2 partitions on laptop (/ and swap) formatted them. mounted both source and target (under /mnt on each machine) rsync -a / from desktop -> laptop (Note: OS on desktop is on sdb5. On laptop it's going to sda1) Now I need to put grub on mbr of laptop boot: linux rescue chroot /mnt/sysimage Here is my problem grub-install /dev/sda The file /boot/grub/stage1 not read correctly. Can

Well, there's so few going right now that I'm showing 38 days to get the DVD. My normal dnld from a mirror travels appx. 600Mb/sec. I'll wait until most of the U.S. goes home before I give up and use the normal download though. Here's hoping... -- Bill

Hello, Is there a VNC client out there that can permit me to run it 15 times simultaneously and scale them smaller so that I can view 15 little remote screens (at the same time) in my one big monitor? Also, is there a way to make it so if the PC is rebooted the client automatically reconnects ? The goal of this is to have one big monitor to view in realtime what people are doing in their PCs.

CentOS 6.3, x86_64. I have noticed when building a new software RAID-6 array on CentOS 6.3 that the mismatch_cnt grows monotonically while the array is building: # cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md11 : active raid6 sdg[5] sdf[4] sde[3] sdd[2] sdc[1] sdb[0] 3904890880 blocks super 1.2 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU]

On earlier versions of Centos, I could boot the install CD in rescue mode, let it find and mount the installed system on the HD even when it was just one disk of RAID1 partitions (type=FD). When booting from the centos5 disk the attempt find the system gives a box that says 'You don't have any Linux partitions'. At the bottom of the screen there is something that says:

this has never happened to me before, and I'm somewhat at a loss. got a email from the cron thing... /etc/cron.weekly/99-raid-check: WARNING: mismatch_cnt is not 0 on /dev/md10 WARNING: mismatch_cnt is not 0 on /dev/md11 ok, md10 and md11 are each raid1's made from 2 x 72GB scsi drives, on a dell 2850 or something dual single-core 3ghz server. these two md's are in

Hello Phil, Wednesday, September 16, 2020, 7:40:24 PM, you wrote: PP> You can achieve this with a hybrid RAID1 by mixing SSDs and HDDs, and PP> marking the HDD members as --write-mostly, meaning most of the reads PP> will come from the faster SSDs retaining much of the speed advantage, PP> but you have the redundancy of both SSDs and HDDs in the array. PP> Read performance is

On 11/23/20 10:46 AM, Simon Matter wrote: >> Hi, >> >> I want to replace my hard drives based SW RAID-1 with SSD's. >> >> What would be the recommended procedure? Can I just remove one drive, >> replace with SSD and rebuild, then repeat with the other drive? > > I suggest to "mdadm --fail" one drive, then "mdadm --remove" it.

On Mon, Jan 12, 2015 at 6:22 PM, Robert Arkiletian <robark at gmail.com> wrote: > On Mon, Jan 5, 2015 at 1:13 PM, Robert Arkiletian <robark at gmail.com> > wrote: > > > Johnny, > > > > Any ETA on version 39.0.2171.95 > > > > cheers > > > > > > bump > _______________________________________________ > CentOS mailing list

Backup!!!!!!!! Von meinem iPhone gesendet > Am 23.11.2020 um 17:10 schrieb centos at niob.at: > > ?On 23/11/2020 16:49, Frank Bures wrote: >> On 11/23/20 10:46 AM, Simon Matter wrote: >>>> Hi, >>>> >>>> I want to replace my hard drives based SW RAID-1 with SSD's. >>>> >>>> What would be the recommended procedure?

Hi Nicolas, I'm running it on Kubuntu. Now that you mention it I did have a problem during vmkit setup. After running the ./configure file with all the options I ran the make file it was giving this error: make[3]: *** [/.automount/root/exports/transient/nataraj/Project/vmkit-0.25/lib/Mvm/Runtime/Release/EscapeAnalysis.o] Error 1 " So I went into Makefile.common and modified GNU

On Mon, Jan 19, 2015 at 12:24 PM, Johnny Hughes <johnny at centos.org> wrote: > On 01/19/2015 12:23 PM, Phelps, Matthew wrote: > > On Mon, Jan 12, 2015 at 6:22 PM, Robert Arkiletian <robark at gmail.com> > wrote: > > > >> On Mon, Jan 5, 2015 at 1:13 PM, Robert Arkiletian <robark at gmail.com> > >> wrote: > >> > >>> Johnny,

On Mon, Jan 19, 2015 at 05:55:44PM -0600, Johnny Hughes wrote: > On 01/19/2015 04:10 PM, Robert Arkiletian wrote: > > On Mon, Jan 19, 2015 at 12:24 PM, Johnny Hughes <johnny at centos.org> wrote: > > > >> On 01/19/2015 12:23 PM, Phelps, Matthew wrote: > >>> On Mon, Jan 12, 2015 at 6:22 PM, Robert Arkiletian <robark at gmail.com> > >> wrote:

Thanks Nicolas, Gaël I followed your instructions and installed compatible versions of llvm, vmkit and GNU Classpath also I unzipped glibj.zip and pointed GNU Classpath lib variable to the the unzipped files during vmkit configure. That error has vanished. Now when I run jnjvm or vmkit in Release/bin on any file I'm getting a new error : " terminate called without an active exception

Hi, This is my current config: /dev/md0 -> 200 MB -> sda1 + sdd1 -> /boot /dev/md1 -> 36 GB -> sda2 + sdd2 -> form VolGroup00 with md2 /dev/md2 -> 18 GB -> sdb1 + sde1 -> form VolGroup00 with md1 sda,sdd -> 36 GB 10k SCSI HDDs sdb,sde -> 18 GB 10k SCSI HDDs I have added 2 36 GB 10K SCSI drives in it, they are detected as sdc and sdf. What should I do if I

Yes I did, one thing worth mentioning is on running configure for GNU Classpath towards the end this error is displayed and it crashes, I assumed it was okay and went to create the symbolic links and completed the rest of the process with vmkit mentioned in Getting Started as instructed: -I../../../native/jni/native-lib -W -Wall -Wmissing-declarations -Wwrite-strings -Wmissing-prototypes

Have you created the symbolic links to GNU Classpath .so? ie step 2 of http://vmkit.llvm.org/get_started.html? Nicolas Nataraj Sundar wrote: > Thanks Nicolas, Gaël > > I followed your instructions and installed compatible versions of llvm, > vmkit and GNU Classpath also I unzipped glibj.zip and pointed GNU > Classpath lib variable to the the unzipped files during vmkit

Hi Nataraj, You're using incompatible versions of vmkit and GNU Classpath. First, you should use vmkit 0.26 and llvm 2.6 (at least, -- use trunk if there are problems). Second, you should use GNU Classpath 0.97.2. Good luck! Nicolas Nataraj Sundar wrote: > Hi Nicolas, > > I'm running it on Kubuntu. > > Now that you mention it I did have a problem during vmkit setup.

Hello all. I have a server with a linux software raid1 setup between two drives of the same model....one hard drive as primary ide master and second hard drive as secondary master. Now primary master hard drive is displaying a lot of SMART errors so I would like to remove it and replace with another drive....different brand but same size. Partitions are /dev/md0 till /dev/md5. I think I know what

Hi, I intent to use VMKIT to convert java byte codes to LLVM IR I have installed VMKIT 0.26, on running jnjvm (as ./jnjvm Hello.class) in Release/bin I get the same error irrespective of class content : jnjvm: JavaClass.cpp:469: jnjvm::JavaObject* jnjvm::Class::doNew(jnjvm::Jnjvm*): Assertion `(this->isInitializing() || classLoader->getCompiler()->isStaticCompiling()) &&