Displaying 20 results from an estimated 500 matches similar to: "FreeBSD, NUT OmniVS1500"
2007 Mar 04
1
OMNIVS1500XL and FreeBSD
I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports...
I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the
tripplite_usb module. I have already built and booted a new kernel with UHID
disabled so that libusb can grab /dev/ugen0.
At first I was able to get the following out of the driver:
# USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root
2010 Jan 10
1
Eaton PW5110 + nut-2.4.1 + OpenBSD
Hello,
I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my
ups.conf follows :
[myups]
driver = bcmxcp_usb
port = auto
desc = "Eaton PW 5110 (1500VA)"
My first attempt to run upsdrvctl ended up complaining about unimplemented
usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following
patch :
2008 Sep 26
0
FreeBSD usbhid-ups problem
Citeren "Daniel O'Connor" <doconnor at gsoft.com.au>:
> usb_control_msg: 161 1 769 0 0x813310c 2 4000
> USB error: error sending control message: Input/output error
> Can't retrieve Report 1: Input/output error
> upsdrv_updateinfo...
> Got to reconnect!
>
> usb_set_debug: Setting debugging level to 3 (on)
> usb_os_find_busses: Found /dev/usb0
>
2007 Mar 24
0
Some FreeBSD tips (was: OMNIVS1500XL and FreeBSD)
Hello all,
I just wanted to dump some info here for the archives.
Here's the original thread for reference:
http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-March/002403.html
Charles Lepple did a tremendous amount of work to get my TrippLite USB
working on FreeBSD 6.2. I'm running an svn version (nut-2.1.0-r879) to
pick up his changes to tripplite_usb. So far, it is
2005 Sep 26
1
TrippLite/Compiling on FreeBSD
Hello,
I wanted to see if there's any chance that NUT will support a few new
TrippLite UPSes that we just bought:
Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL,
rev 1.1
I grabbed the devel sources via cvs, but am having trouble building it
when I enable the "newhidups" driver:
gmake[1]: Leaving directory `/usr/local/src/nut/common'
drivers/
2010 Sep 26
3
Cannot connect to APC Smart via USB under FreeBSD
Hi, folks!
There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL.
NUT is compiled from ports with following options:
---------------------------------------
_OPTIONS_READ=nut-2.4.1_5
WITH_SERIAL=true
WITH_USB=true
WITH_SNMP=true
WITHOUT_NEON=true
WITHOUT_PDU=true
WITHOUT_HAL=true
WITHOUT_IPV6=true
WITHOUT_CGI=true
---------------------------------------
UPS is successfully recognized by OS
2010 Jan 08
3
USB problems on 8.0-STABLE
I am having problems with mouse, keyboard and APC UPS. When attempting to
start apcupsd I get the following error:
Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd FATAL ERROR in generic-usb.c at
line 636 Cannot find UPS device -- For a link to detailed USB trouble
shooting information, please see <http://www.apcupsd.com/support.html>.
Jan 8 17:42:06 Ace apcupsd[1606]: apcupsd error shutdown
2013 Oct 10
1
cached message size errors
Hello,
We recently moved from courier to dovecot, and I'm seeing a handful
of errors that prevent people from retrieving email.
Below is a snippet of the log sequence I see when this happens:
Oct 10 13:44:24 mbox dovecot: imap(xxx at bway.net): Error: Cached message size smaller than expected (1759 < 1830)
Oct 10 13:44:24 mbox dovecot: imap(xxx at bway.net): Error: Maildir filename has
2008 Aug 12
0
Tripplite OMNIVS1500 Driver Failures
Hello All,
This is my first post to the list & I have tried to do as much searching and
debugging on my own as I can bear. Please HELP!
I am currently using up to date Centos 5.2 32-bit - kernel version:
2.6.18-92.1.10.el5PAE #1 SMP. I am using a Tripplite OMNIVS1500 via usb
connection. I am using the tripplite_usb driver. I have tried to user
versions 2.2.0 from an rpm, 2.2.2 & and the
2009 Sep 01
4
Tripplite_usb Driver fail on OMNIVS1500
Model: Tripp-lite OMNIVS1500
Error:
Network UPS Tools - UPS driver controller 2.2.1-
Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-)
Warning: This is an experimental driver.
Some features may not function correctly.
Detected a UPS: unknown/unknown
libusb_set_report() returned -1 instead of 8
Could not reset watchdog. Please send model information to nut-upsdev
mailing
2006 Jun 27
1
Tripp Lite OMNIVS1500XL Unknown protocol
Good afternoon,
I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL
using NUT. I checked the compatibility list and saw that this UPS is
supported by tripplite_usb.
The system is running Debian Stable, but I've downloaded NUT 2.0.3 and
compiled from source since the packaged 2.0.1 doesn't include tripplite_usb.
I compiled --with-user=nut.
My first attempt at
2014 Jan 26
2
3g usb dongle - Huawei E1552
Hi
Please could someone assist me?
I?e got a 3g usb dongle - Huawei E1552.
[root@]# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus
2014 Dec 01
4
06da:0002 Phoenixtec Power Co., Ltd UPS
Hi! all.
I have been reading every mail and news about nut and 06da:0002
Phoenixtec but not found a solution.
I have a very nice working ups from:
CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900"
It has COM3 and USB plugs, I don't know if it needs a standar RS232
I have test with varius drivers in ups.conf
[MyUPS]
driver = bcmxcp_usb | usbhid-ups |
2014 Dec 04
4
06da:0002 Phoenixtec Power Co., Ltd UPS
Hi Charles.
I have got this output with driver usbhid-ups
ups.conf
[Phoenixtec]
driver = usbhid-ups
vendorid = 06da
productid = 0002
port = auto
#~ langid_fix=0x0409
desc = "CENER ONLINE 1000VA"
# export USB_DEBUG=5
# ./usbhid-ups -a Phoenixtec
Network UPS Tools - Generic HID driver 0.37 (2.6.4)
USB communication driver 0.32
0.000000 debug level is '3'
0.000557
2005 Aug 06
1
tripp lite omnivs1500xl and usb
i just purchased a tripp lite OMNIVS1500XL and have been attempting to get
it working with the usb drivers since it doesn't have a serial port. it
hasn't been anywhere near successful and i was hoping someone might be
able to point me in the right direction.
i run gentoo and this is what i currenlty have installed:
nut 2.0.2
libusb 0.1.10a (gentoo modified)
usbutils 0.11-r5
2008 Aug 11
5
Tripplite OMNIVS1500 Woes
Hello All,
This is my first post to the list & I have tried to do as much searching and
debugging on my own as I can bear. Please HELP!
I am currently using up to date Centos 5.2 32-bit - kernel version:
2.6.18-92.1.10.el5PAE #1 SMP. I am using a Tripplite OMNIVS1500 via usb
connection. I am using the tripplite_usb driver. I have tried to user
versions 2.2.0 from an rpm, 2.2.2 & and the
2008 Aug 11
5
Tripplite OMNIVS1500 Woes
Hello All,
This is my first post to the list & I have tried to do as much searching and
debugging on my own as I can bear. Please HELP!
I am currently using up to date Centos 5.2 32-bit - kernel version:
2.6.18-92.1.10.el5PAE #1 SMP. I am using a Tripplite OMNIVS1500 via usb
connection. I am using the tripplite_usb driver. I have tried to user
versions 2.2.0 from an rpm, 2.2.2 & and the
2009 May 21
1
Nut and PowerWare 5115
Hi Arnaud,
Any luck with the latest subversion trunk?
From: Greg
Sent: Wednesday, May 13, 2009 10:34 PM
To: Greg ; Arnaud Quette
Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org
Subject: Re: [Nut-upsuser] Nut and PowerWare 5115
Hi Arnaud,
Some more testing on Ubuntu 9.04.
Here is the output of bcmxcp_usb and lsusb
============================================
root at
2009 Aug 03
2
Creating a "default" domain
Hello,
I'm setting up a test server to work through the issues involved in
bringing a bunch of vpopmail/qmail/courier users into a postfix/dovecot
server. So far I'm seeing lots of info to aid in the transition.
One thing I'm lost on is that since Dovecot is providing all the auth
mechanisms rather than vpopmail, I'm not sure how to emulate a particular
vpopmail behavior we
2009 Aug 11
1
sieve/managesieve and spam filtering
Hello all,
I've got a test environment setup in preparation for a move from
qmail/vpopmail/courier to postfix/padmin/dovecot. I have a number of
questions that seem to span multiple pieces of software, and this is one
of them...
Our policy with spam filtering is that a user should be able to turn it
off (ie: not put tagged spam into a spam folder, but deliver to their
inbox) if they