Displaying 20 results from an estimated 2000 matches similar to: "NUT upgrade to 2.6.0 in Gentoo with Liebert UPS"
2011 May 30
2
UPS Liebert GXT3 config
Hi all,
I?ve a UPS Liebert GXT3 500-3000VA with USB port.
I?ve install NUT version 2.2.2 from repository packages for Debian Lenny.
Linux kernel 2.6.26
I?ve try to use usbhid-ups driver in ups.conf
[liebert]
driver=usbhid-ups
port=/dev/usb/hiddev0
Debian get the usb:
# lsusb -v
Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS
Device Descriptor:
bLength
2017 Jun 03
0
Fwd: Emerson Liebert GXT4
On Jun 2, 2017, at 8:28 AM, zefanjas <nut at zefanjas.de> wrote:
> I couldn't get the GXT4 working with usbhid-ups driver. So I need some
> advise to continue to get this device working. The GXT3 seems to be
> working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html).
>
> Here is my ups.conf
>
> [ups]
> driver = usbhid-ups
> port =
2009 Nov 10
1
[PATCH] Add support for Liebert PowerSure PSA to liebert-hid.c
This patch adds support for the following ups to liebert-hid.c:
$ lsusb | grep Liebert
Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS
Using this patch, I'm able to obtain information about the ups via
upsc:
$ upsc upsname
battery.charge: 100
battery.runtime: 1012
battery.type: PbAc
battery.voltage: 1172
battery.voltage.nominal: 12
driver.name: usbhid-ups
2023 Apr 08
1
Vertiv Liebert
Hello,
I was able to get the Vertiv/Liebert UPS (Vertiv Liebert PSA5 1500VA 900W -
PSA5-1500MT120) to start working with NUT and "usbhid" driver, but would
appreciate help to get it to work properly.
Here's the output from the "upsc" command for a Cyberpower UPS I have:
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
2017 Jun 02
2
Fwd: Emerson Liebert GXT4
Hello,
we have a Emerson Liebert GXT4, that we like to connect to our servers
to shut them down if there is a power failure (which happens quite often
in our area).
I couldn't get the GXT4 working with usbhid-ups driver. So I need some
advise to continue to get this device working. The GXT3 seems to be
working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html).
Here is my
2010 Apr 23
1
Liebert powersure psp
Hi,
I have a Liebert POWERSURE PSP connected via USB. Cleanly built and
installed from source nut-2.4.3.tar.gz
using kernel 2.6.30.5
#cat /proc/bus/usb
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=10af ProdID=0003 Rev= 0.00
S: Manufacturer=Liebert
S: Product=Liebert PSP 350 FW: 02
S:
2013 Aug 20
0
Liebert GXT3 ID 10af:0000 Not working
[please keep the list CC'd.]
On Aug 20, 2013, at 12:50 AM, Korviakov Andrey wrote:
> Yes, it's my mistake: UPS used USB cable for communication, but i think that it's simple usb-com cable because nut work with liebert driver on ttyS0 port.
If that is the case, I doubt that usbhid-ups will be able to retrieve any additional information.
> In ups.conf i tried:
>
>
2023 Apr 09
1
Vertiv Liebert
Bruce Pleat via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
writes:
> Here's the (far less lengthy) output for the Vertiv Liebert:
>
> device.mfr: Vertiv Co
> device.model: Liebert PSA5
> device.serial: 22223106602D04C
> device.type: ups
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 30
> driver.parameter.pollinterval: 2
>
2005 Aug 30
0
Liebert PowerSure PSA 500
[FAQ on USB-connected UPSes]
> Remember: this is brand new *experimental* software and is probably
> very broken. Do us a favor and report successes or failures to
> the mailing lists.
No problem ... :
UPS: Liebert PowerSure PSA 500
NUT: Version 2.0.2
Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and
CONFIG_USB_HIDDEV compiled in (statically)
2013 Aug 20
0
Liebert GXT3 ID 10af:0000 Not working
On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote:
> I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2.
> lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS
>
> And this UPS detected only with this section in ups.conf:
>
> [liebert]
> driver = liebert
> port = /dev/ttyS0
I am confused.
2014 Nov 06
2
Emerson/Liebert GXT3
2014-10-30 0:49 GMT-03:00 Charles Lepple <clepple at gmail.com>:
> On Oct 29, 2014, at 5:08 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote:
>
>> Hi,
>>
>> I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm
>> using Ubuntu 14.04, but I'm having troubles (similar to this thread
>> [1]) using the
2013 Aug 19
3
Liebert GXT3 ID 10af:0000 Not working
Hello.
I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2.
lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS
And this UPS detected only with this section in ups.conf:
[liebert]
driver = liebert
port = /dev/ttyS0
but only this variables available:
device.mfr: Liebert
device.model: MultiLink
device.type: ups
2017 Jun 05
2
Fwd: Emerson Liebert GXT4
Hi,
thanks for your helpful reply. I've added the productid in the ups.conf
and it seems to work (better) now.
> After starting the driver and upsd, what does "upsc ups" return? If you can also include "upsrw ups" and "upscmd -l ups" output, we can update the DDL.
#upsc ups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 20
2023 Jul 18
0
Liebert PSA 1500 (500, 1000, 650, ...)
Hello
The page https://networkupstools.org/ddl/Liebert/PSA_1500.html don't
contain all information about UPS series PSA.
First, the variable "*device.serial*" is dummy, it is always empty , and
"*ups.serial*" also always empty.
Second, configuration file for the all UPS "PSA" contain these lines:
[PSA]
??? driver = "usbhid-ups"
?? ?port =
2011 Feb 03
3
Status OB (on battery) when polling a Liebert PSA
Hi all,
This is my first experience with NUT.
I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC.
I have followed the instruction in the "Configuration" section of the online
user manual.
Everything seems to be fine, except that, when I run "upsc
liebert at localhostups.status", it retuns "OB", even if the UPS is
currently online.
Here
2014 Oct 01
3
Return on experience with an Emerson/Liebert GXT3
Hi.
I would like to share with you my experience on trying to use nut with a Liebert GXT3 on a Debian wheezy with nut-server 2.6.4.
Please find my observations below.
(1) I've installed the packaged version of nut-server
# aptitude install nut-server
(2) I did some tuning for my configuration
#??cat << EOF >> /etc/nut/ups.conf
user=nut
[liebert]
??????? driver=usbhid-ups
2013 Feb 19
1
UPS Liebert GXT-3
Hello,
I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched
the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS
6.3) to monitor the UPS, but couldn't find a successful configuration. I'm
running kernel 2.6.32-279.14.1.el6.x86_64.
The UPS is connected with an USB cable:
Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive
2014 Nov 09
2
Emerson/Liebert GXT3
2014-11-08 20:46 GMT-03:00 Charles Lepple <clepple at gmail.com>:
> On Nov 7, 2014, at 7:30 AM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote:
>
>> 2014-11-07 0:16 GMT-03:00 Charles Lepple <clepple at gmail.com>:
>>> On Nov 6, 2014, at 5:56 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote:
>>>
>>>>
2023 Dec 04
1
Liebert UPS driver
Replaced ups with a new Liebert UPS and it seems the device may not be known to nut. Below is output of lsusb:
ID 10af:0002 Liebert Corp. PowerSure PST UPS
Sent from Outlook<http://aka.ms/weboutlook>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231204/7c08a727/attachment.htm>
2017 Apr 17
1
New UPS information - Liebert GXT4 via US
Hi UPS List members,
I have purchased a number of Emerson Power / Liebert GXT4 UPS units.
I have these working correctly under nut, but limited detsils are being reported.
I am happy to supply information on the USB communications to improve the reported details
I can use WireShark to capture the comms between the supplied Windows GUI tool and the UPS
Please advise the best way I can