similar to: Calls from PSTN on SPA3102

Hello My ISP provides an FXS port to plug a handset, which can be used to make free calls to (GSM) cellphones, similar to the Billion ADSL modems: http://au.billion.com/product/voip.php My plan is to install an SIP client on a smartphone, so that when I'm travelling, I can connect to a good wifi hotspot, register with an Asterisk server at home which has an FXO card, tell Asterisk the

Hello, Anyone see this issue, I have a conference bridge setup for a church with a Barix unit that streams audio into the bridge. The bridge is started by calling in to a number that executes a call file and the system calls the Barix unit starting the broadcast. Users then call in and can listen to the sermons live. The system works flawless with 1 issue I can't get accurate cdr's. Every

Ok, I downgraded spa3102 to 3.3.6. Now when I make a call from pstn and call is established asterisk seems to drop the call. However I still hearing ringback on pstn side, call is established again, and asterisk drops the call again, like a loop. -- Executing [preat_admin at nodo:1] Playback("SIP/PSTN-08214948", "horario-atencion/our-business-hours-are") in new stack

I happened to be in the cli tonight as some (208.122.57.58) initiated a simple attack - just trying to make long distance calls from outside context. Although harmless, this went on for several minutes as the idiot just used up my bandwidth with SIP messages. Here's and example: [2011-12-28 22:53:42] NOTICE[9635]: chan_sip.c:14035 handle_request_invite: Call from '' to extension

Hi! I try to get rid of some part of CALLERID(name) but I cant realy figure out a way to do it. For example: CALLERID(name) = "Martela (fax)" I am just looking for the part before ? (? in my case ?Martela?. I can?t serch for ? ?, could be many ? ?, but only one ? (?, thought i could do something like: exten => 0424449631,n,NoOp(${CUT(CALLERID(name),\(,1):0:-1}) But that gave me

Hy all, Recently a have a little problem with a Cisco device, SPA3102. I use this device with asterisk to dial out with outbound trunk. (SPA3102 has 1 FXO port) It working ok , but the device SPA3102 do this : when a call is placed for outgoing in asterisk and send to SPA3102 , this device "answer and dial the number in the same time" , in my CLI I see the channel is open , but on

Hi All, In our small office calls to the PSTN are currently sent via Asterisk and a Linksys SPA3102 (1 x FXO and 1 x FXS): SIP Phone --> Asterisk --> Linksys SPA3102 --> PSTN If the PSTN is in use on SPA3102 I need a way to get the call to then route out over IAX termination. SIP Phone --> Asterisk--> Linksys SPA3102 --> PSTN (In Use)

Hello, i have a SPA3102 and asterisk v. 1.2.18. I also hev a mysql database with cdr. Well all I want is to receive incoming calls from pstn on specified sip account (suppose 8000), and to initiate outgoing calls from all my asterisk sip accounts through SPA3102 device. Someone can explain me what may i set on SPA and asterisk to do this thing. Thank you for your support. -------------- next part

Somebody has 5.1.7 firmware for SPA3102? I'm having issues with inbound/outbound calls using asterisk through SPA3102 with firmware 5.1.10. I've read it has a codec bug, since it doesn't care about what you set up in Preferred Codec. Any help will be appreciated. Sebastian -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Hi, I've read in this mailinglist archives some notes related to Linksys SPA3102 provisioning but I couldn't find there the answer I'm looking for. Is it possible with this box (mine is unlocked) to store its config file(s) in a TFTP server, and have this(these) file(s) reloaded at boot time, for instance ? In embedded web server, there is a Provisioning tab full of settings but none

Hi - I got a SPA3102. I've set it up without to many problems. If the unit looses power, calls to the PSTN are bridged which is nice. However, if the Asterisk server is unavailable (I turned it off to test), calls out are not bridged to the PSTN. I've rebooted the SPA3102 with the asterisk server off, but still it gives me no dial- tone. Under the configuration, Auto PSTN

Hi. I have a SPA3102 updated with with Software Version: 5.1.7(GW). I have this settings on Voice/Regional: Interdigit Long Timer: 10 Interdigit Short Timer: 3 Anyway, when hooking up (without dialing anything), the timeout starts after 3 seconds. It's like the Long Timer is unused. After dialing, the Short Timer is also used to timeout. Is that normal? Am I missing something? Thanks. --

I'm faxing from stand alone fax machine via linksys SPA3102 but most of the time only half or quarter page goes through. Did anybody have any experience like this? -- #Joseph

Hi list, After failing to get a Sipura/Linksys SPA3000, which I've configured as a PSTN gateway, to pass on the Caller ID, I decided to try my luck with a Linksys SPA3102 after hearing some promising stories. Unfortunately, I've run into a completely new problem: it seems Asterisk won't let this device register. I went about configuring the SPA3102 in much the same way as I

Does anybody know if the process of upgrading firmware on "Linksys SPA3102-NA" in Linux is the same as on Sipura 3K as described on voip-info.org http://www.voip-info.org/wiki/view/Sipura -- #Joseph GPG KeyID: ED0E1FB7

Hello, I got a SPA3102 and everything works fine except calling from voip to phone on fxo port. The phone ring but doesn't get any sound. I connected SPA at my asterisk server and i want to call from asterisk through SPA to fxo port where i have a regular phone. Thank you for support. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have been considering a purchase of the linksys spa3102 for a couple hours but I would like to know from someone here, wether this device will support faxing on my local asterisk server, I have had success sending and recieving faces with an x100p, and recall that in the old documentation, they mention that if I send/recieve faxes, that it all should be done on the local server for best

Hello, I could successfully played with General Purpose Parameters (GPP_A, GPP_B) and a TFTP server : whenever I change a GPP value in a configuration file, my SPA3102 automatically updates the corresponding value its web server shows. My config file is : <flat-profile> <GPP_A>myid </GPP_A> <UID1>myid </UID1> </flat-profile> I though I could use this

Hi, I'm connecting a Linksys SPA3102 to 3 different PSTN analog lines. With only one of those, CID is shown. Beside that, everything is working OK. Lines have different providers and/or locations. All are located in France and CID Detection Method is ETSI FSK / Bell 202. If I'm connecting a TDM400-enabled Asterisk system, to one of those 2 non-working lines : it does work. The only