similar to: A101DE Sangoma Card in AsteriskNow 1.7.1

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hi Does Sangoma 8-port card A108 support PCIe version 2.0 ? The card is here http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a108.html And we want to use 3 such cards in this motherboard because it has 3 PCIe slots of version 2.0 http://www.intel.com/products/desktop/motherboards/DX58SO/DX58SO-overview.htm Is this a good idea ? Do you have any experience

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hello. I've developed an algorithm in R which I need to package. The implementation uses S4 objects and it's divided in 5 files. Everything is working fine when I load the files into the R console but when I try to make a package I get an error that I don't quite understand. Here's what I do: *1.* in R console, I do and get: > package.skeleton(name='remora') Creating

For compiling the xen kernel we use -nostdinc which means we don''t want to rely on any external headers. That also counts vor stdarg.h. Use the external header when we compile the tools. Adapt libelf-loader.c which is compiled in the kernel and with the tools. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> -- ---to satisfy European Law for business letters: Advanced

Hi all, I have a trixbox2.6.1 on my one server, i have configured sangoma A200/Remora FXO/FXS Analog AFT card on that server, from my zap line the incoming faxes are coming, i have setup the did for zap channel. my question is when i am getting any faxes, asterisk shows me rxfax execution and suddently asterisk crashes and i can't get email notification for received faxes. any one help me

Hi, How can can you stack sangoma cards such as http://www.sangoma.com/datasheets/p_a200-specs in a given PC enclosure ? It seems to me that it introduces mechanical constraints that seem difficult to comply with as space between cards is set by Remora expansion card. Your advice ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I have an office with a T1 that provides 4 (out of 8) analog PSTN lines thru an adtran board. I want to add 4 more analog lines. Currently I have a Digium TDM40B. I'm wondering what the best upgrade path is, where I define 'best' as the solution that is most likely to work without problems (like interupt conflicts) and work with my current echo tuning . I see my purchase

Hi, I'm trying to install asterisk(v1.2.22) with FreepBX(v2.2.3) with a 4-Port FXO Sangoma card A200. I'm using Fedora 7 (x86_64) kernel version 2.6.22.1-27.fc7, but i'm having these errors: $ ztcfg -vvvv Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS

Hello All, I am trying to figure out which way to go for a quad port fxo solution with a good echo can on it. My options are the sangoma remora, a mediatrix fxo, or something similar. The issue is that I would need a good EC. This would be on about a 9000 foot loop, and the lines don't function well on a spa-3000 or zaptel tdm 4 port card. Anyone have experience that drives them in a

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas???

Hello there, recently installed CentOS6 on a (quite old) 64-bit system, and from the GNOME's sound preference app, I can see that the Output volume range is said "amplified" from 63% to 100%. Below 63% it's unamplified. No idea what's implied behind this amplification (I don't see this on other desktops), but I notice that when "amplified" the sound is pretty

Hello all, I was wondering if CAST5 encryption is currently being added the openssh? It's a steller block cipher. No one's found any weaknesses in it yet and it's free for non profit use. TTYL JLC -- #!/bin/perl -sp0777i<X+d*lMLa^*lN%0]dsXx++lMlN/dsM0<j]dsj $/=unpack('H*',$_);$_=`echo 16dio\U$k"SK$/SM$n\EsN0p[lN*1

Hello, Junghanns and BeroNet offer 8 BRI ports cards. Do you know if Digium's B410P has an inner TDM bus so that an 8 BRI ports subsystem (2 PCI slots used, but 1 one set of interrupts) could be made out of 2 B410P ? I know you could (theorically) do this with Junghanns and BeroNet cards. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, I'm about to install Asterisk on an Old HP NetServer LC2000 Server (year 2001), it has 2 Pentium III 1GHz CPUs (Coppermine FSB 133MHz 256K L2 Cache), 768MB PC-133 ECC RAM, 3 UltraSCSI LVD2 18.2GB 10K RPM HDD in RAID5, 100Mb NIC for server. This Server will support 35 SIP phones (users) and 10 FXO ports (for telco lines) and 2 FXS ports (internal analog phones) with a Sangoma Remora

I recently bought a new Compaq Presario sr1710nx with 64-bit Sempron and last week installed Centos 4.3 64-bit on it. Worked like a champ until I attempted a reboot (using "init 6") and the computer hung after finishing the shutdown. Rebooting from cold worked, but without a warm reboot I was hesitant to use Centos. Since FC5 (64-bit as well) came out recently, I tried it and

Hi: I have a Sangoma A200 card installed in a server with two FXO modules and one FXS module. Analog sets connected to the FXS module have a "squeaky static" -- it's like static mixed with the sound of someone vigorously cleaning a window a few doors down. In other words, it's not a classic static noise, but it is noise, and it's distracting. Remote callers can hear this

Hi all, Years ago, I was pretty sure attempting to use two TDM400p cards in one machine was recommended against by Digium ... probably because the cards couldn't hack it, and/or interrupt problems etc I have seen some posts recently that seem to indicate it is in fact possible these days thanks to some updated firmware perhaps? ..... I just need to have two in the server because the 4 ports

Just built myself a little test server with an Atom 230 processor in it and am quite impressed with it so-far. Wondering is anyones used one in anger for a VoIP platform? I'm after something with a bit more oomph than the VIAs I'm currently using that I can use in a small box (mini ATX size) without going full-blown Xeons, etc. Cheers, Gordon