similar to: [1.6] Where to put "options wctdm opermode"?

Hi All; If I need to set the opermode to King Saudi Arabia, what the name I have to use? For example, to set it for kuwait then I use opermode=KUWAIT. So what will be for Saudi Arabia? Any advise? Regards Bilal

Hello On a brand new CentOS 5.5 host, I wanted to install Dahdi before installing Asterisk 1.4.x. So I untarred dahdi-linux-complete-2.4.0+2.4.0.tar.gz, followed by make, make install, make config. Next, I created the following files from scratch: ============ /etc/modprobe.d/dahdi.conf: options wctdm opermode=FRANCE ============ /etc/dahdi/modules wctdm ============ /etc/dahdi/system.conf

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

Hi I'm sorry for the my trivial quest. I Have asterisk 1.4 with TDM 400 with FXO and FXS, and works fine from several months. Now I want to connect a device to TDMFXS that want a ring frequecy of 25 hz to activate: i am italian, and usually the ring freq is 20 hz. The other time (I have used that device several times with other asterisk installation) I have modified /etc//modprobe.conf and

Hello I'm trying to install Dahdi through source code on a Fedora 13 host to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv isn't happy. 1. After successfully running "make all; make install; make config", I edited /etc/dahdi/system.conf thusly: loadzone=fr defaultzone=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools

Hi, Has anyone in australia got asterisk running on FreeBSD? how would i pass the opermode=AUSTRALIA parameter to the wcfxs.ko module as kldload doesnt let you pass parameters to the module like modprobe in Linux. I tried to get the sysctl variable using sysctl -a it might use but nothing applicable was visible.... i need to set the impedences to 600 ohms, can someone please advice me on

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get:

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

After getting zaptel from the CVS server, compiling and installing it I type: modprobe zaptel and all is well. Then I type: modprobe wctdm and I get this: modprobe: Can't locate module wctdm Any idea why? I did this yesterday but with the CVS head of Asterisk and I got by this part without a problem. I reinstalled it all today because I wanted the stable release on our server since we

Asterisk - 1.8.4.1 Dahdi-linux - 2.4.1.2 Dahdi-tools - 2.4.1 Kernel: 2.6.37.6 Kernel BKL: enabled I am upgrading Asterisk on this box. It has an OpenVox A400P PCI analog card with 1 FXO and 1FXS module. This server has been running just fine for two years with Asterisk 1.6.1.0 I've just upgraded all the OS and installed Asterisk 1.8.4.1. On trying to configure the A400P I get: # modprobe

Can anyone suggest where I might begin looking for an answer please? I have just installed a TDM400P (2x FXS and 1x FXO modules installed) The first problem is that it does not seem to be able to detect if the remote party has hung up when a call comes through on the FXO. For example, if someone calls in, and then hangs up at any time after it starts ringing, Asterisk carries on as though the

Because of a kernel upgrade i needed to recompile DAHDI. Dahdi 2.0.0 with 2.0.1 was working ok, after the reboot and compile it doesn't start anymore. Firstly it tells me it is using /etc/zaptel.conf which is deprecated, if i remove that file it complains that this file is missing..... Secondly i get an error about a missing dev file which refers to zap (which seems strange to me because

Hi, I've installed Asterisk with a TDM400P on a Debian Etch distro. When I reboot the server I get zaptel and wctdm automatically loaded. I'd like to avoid this behaviour. How can I disable this automatic "modprobe wctdm" during boot? Thanks Giorgio

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

Hi, I have a pentium 4 with Intel motherboard and one TDM400P (2 fxs, 2fxo) modprobe zaptel is Ok but When I execute modprobe wctdm never load the module, I can wait for 1 year but never response me (error or OK). I need to do ctrl+c Any idea? Edgardo >>> jan@irial.com 06/21/05 10:07 AM >>> i know that there are extensive rework on the transfer in SIP at the moment. --On

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Days ago I bought a OpenVox A400P card with a port FXS and another FXO that I am testing with my Asterisk installation in my house. I'm using Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on Debian GNU/Linux Lenny. I was reading "The future of telephony" and this [1] document looking for information about

The card you installed has FXO or FXS modules in it ????? are you getting your lines directly from the telco co??? Doug D On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent: * -----Original Message----- * From: Todd Reese * Reply-to: Asterisk Users Mailing List - Non-Commercial Discussion * To: asterisk-users at lists.digium.com [3] * Subject: [asterisk-users] Dahdi

Hello, I have found a "bug", I think in the way TDM400P cards handle FXO interface disconnect/re-connect problems. Normally I do keep all the wires connected from my CO / PABX quite securely, but I had a need to re-route the cable from one side of the desk to another, and I simply disconnected the RJ-45 connector and plugged it back in. THIS PROMPTLY RESULTED IN VERY VERY SCRATCHY AUDIO

Yesterday I pulled in the latest svn of Dahdi and added the files from a recent kernel in the drivers/staging/echo structure and modified the Kbuild file so it would compile without error. I insmod'ed the module in, and modified my system.conf has echocanceller=oslec. cat /proc/dahdi/1 shows: Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER) IRQ misses: 1 1