similar to: [1.4] Call progress for Zaptel 1.4.3.1?

Hello I need to write a script that will dial a list of customers and play a message. I couldn't find a way to tell Asterisk/Zaptel to wait until the callee has actually picked up the phone before proceeding with Playback(): ============ ;call made through Dial(): Doesn't proceed after off-hook/hangup [internal] exten => 8888,1,Dial(Zap/1/${IPPI}) exten => 8888,n,NoOp(We never

Hello I'm trying to use ChanIsAvail() to check when the landline is back to idle after a call, but for some reason, Asterisk doesn't detect that the callee has hung up after listening to MoH for a few seconds: ========== extensions.conf ;Play MoH for a few seconds, hang up, and ;check ChanIsAvail() able to detect when line idle again exten => 8888,1,Answer() exten =>

hi: In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized). what i want to do is to not let polarity reversal take effect on fxo number 4. that what i have in my

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

I have one TDM2404E digium card on asterisk box, after configuring the zaptel and zapata configuration files, I am getting these errors when reloading asterisk: ast_unregister_indication_country: Removed default indication country 'us' setup_zap: Ignoring signalling setup_zap: Ignoring answeronpolarityswitch unable to recognize channel 13-5 what is the reason for that? Thanks,

I have a very strange problem I'm hoping someone has encountered already. I've scoured the internet for an answer to this one. My phone company provides no disconnect supervision. Hence I'm forced to use the busydetect feature. I have a TDM400 with two FXO ports. If I call from an internal extension to a landline and then hangup the landline Asterisk detects the busy signal

I'm running Asterisk CVS-v1-0-12/20/04. I'm using PHP with Manager API Here is the code: #################################################################### # Make call #################################################################### $socket = fsockopen($ask_db,"5038", $errno, $errstr, $timeout); if (!$socket) { echo "$errstr ($errno)<br /\n"; } else {

Hi, Im working with the following versions: -asterisk-1.2.12.1 -zaptel-1.2.9.1 And with the following card: 00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 201 I/O ports at c800 [size=256] Memory at fe000000 (32-bit, non-prefetchable)

Using Asterisk 1.6.1.14 and dahdi 2.2.0.2+2.2.0. We're placing outbound calls over an analog line. Some of these calls are going to cell phones that play music rather than providing a standard ring. As a result, the Dial command sometimes returns a DIALSTATUS of CHANUNAVAIL and sometimes it returns BUSY. The problem is that this is happening on calls that are being answered. Has anyone else

Hi list. I have Asterisk installed on a Debian 1.8 6 64-bit. What happens is the following, some channels are not being hangup properly. They run the hangup in dialplan, but the output of the command "core show channels" shows several channels with status "rsrvd." Checking the server's memory, the "top" command shows multiple processes and stopped using the

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

I've just had polarity reversal provisioned by our telco to test hangup detect with a TDM400P I've set hanguponpolarityswitch=yes in zapata.conf When I start Asterisk I get "ignoring hanguponpolarityswitch" in /var/log/asterisk/messages I assume that the option is either not valid or conflicts with another setting somewhere. Any ideas?

Hi, We are using Vicidial and sometime even when agent disconnects, outgoing call originated by dialer is still active. Since call was initiated by dialer and then bought into meetme conference of agent and we can't corelate this call to any agent channel. When agents are dialing, channels doesn't show calls vicidial2*CLI> show channels Channel Location

Hello my friends... We are having some problems with the fax in our asterisk server... We have: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P This digium card has 3 FXO ports and 1 FXS port where we have a fax machine connected! The problem is that we can receive fax very good, but we can't make any outbound fax call, in fact, our asterisk get freezed

Hi, I am using asterisk 1.4.28 with freepbx and Wildcard TDM410P card. Everything is working fine except the caller ID of incoming call from PSTN line. The phone display is showing "Unknown" when there is an incoming call. *My log file showing this while an incoming call on PSTN line:* tail -f /var/log/asterisk/full [Dec 30 06:36:16] DEBUG[2559] dsp.c: dsp busy pattern set to 0,0

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried

Hi, I have a problem with polarity reverse this my dahdi config [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1

Hi I have a 3 level nested while-endwhile loop in a macro that when the execution reaches endwhile, it is jumping out to the While at the caller macro. It shouldn't since the are instructions after the endwhile. -- Executing [s at macro-call-from-outside:72] EndWhile("DAHDI/i1/1234567-4a7f", "") in new stack == Channel 'DAHDI/i1/1234567-4a7f' jumping out of

Hi everyone, I just installed a TDM02B and surprisingly, I had really no problems except one. If I place an outbound call on the Zap line (Zap/3), everything works fine except when the called party hangups before I do. I do get congestion, but that is expected. However, when I try to make another outbound call using that Zap line, the CLI shows that the call is being dialed, but nothing