similar to: Asterisk with TE 121 DADHI incoming calls fail

I'm running 1.8.2 rc1 on a Centos box with dahdi-linux-complete 2.4, using the wct4xxp module. All operations appear normal however I noticed an error repeating occasionally on the console. [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 ROSE RETURN ERROR: [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 INVOKE ID: 11 [Jan 10 13:53:05] ERROR[6906]:

HI, I'm using asterisk-1.4.24, dahdi-linux-complete-2.4.0+2.4.0 and libpri-1.4.11.4 When dial, when 492131 answer, in console appear some error messages -- AGI Script Executing Application: (DIAL) Options: (DAHDI/g1/492131|60) -- Requested transfer capability: 0x00 - SPEECH -- Called g1/492131 [Dec 4 11:15:59] WARNING[7669]: chan_dahdi.c:1776 dahdi_enable_ec: Unable to enable

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hi all, Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with Asterisk 1.6.2 and DAHDI BRI - to no avail. I had two servers so copied network setting etc from the working one, moved the card across, ran dahdi_genconf etc and it didn't work. Here's the console output with notices disabled: lucas*CLI> pri intense debug span 1 Enabled debugging on span 1 [Dec 16

Hi, I'm experiencing difficulties to get a B410P running with Asterisk 10.3.1 and DAHDI 2.6.1. Am I supposed to use DAHDI for this card and ISDN BRI for my country (Belgium)? thx, BC

I'm using QSIG between Asterisk and an NEC SV8300. Whenever I make a call from the SV8300, I see: [Oct 4 21:02:49] ERROR[5729]: chan_dahdi.c:12226 dahdi_pri_error: !! < Unknown IE 50 (cs5, len = 3) I see an IE 50 in the Q.932 specification, so I don't understand why this error is occuring.

Hi, I'm getting the following error from an asterisk 1.6.0.9 installation: [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler This repeats a few times, then asterisk crashes. I can't seem to locate any info on this error at all. I'm using

getting some errors on my test system. this is 1.4 (Asterisk SVN-branch-1.4-r214194) with a 4 port T412p card. Three of the ports are connected: Span 1 to the PSTN on a 10 channel bearer line, ports 2 and 3 are cross-overed (!) to each other. Port 4 is not plugged in. This has been working fine for several months. I updated a few days ago to the latest 1.4 branch. However, now I cannot dial into

Hi, I suddenly started to receive an error like [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? and it went on till i reboot asterisk and dahdi services.. I wonder what caused this error, because there were no physical problem between pbx and asterisk

Starting from today i am receiving the following errors on asterisk.. What can be the reason for it? [May 7 11:45:16] ERROR[14885]: chan_dahdi.c:10515 dahdi_pri_error: ACK received for '0' outside of window of '3' to '4', restarting [May 7 11:45:16] WARNING[14885]: chan_dahdi.c:3347 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel

I saw some of the heat about the $20 bounty earlier. So I don't want to put a low bounty out. Quote me a bounty, and I'll see if I can get it approved by management. :-) I'm in need of getting this bug fixed. Bug has all of the details, but basically 1.4.22 broke it all. I've waited as long as I can - hoping the bug would 'resolve itself' - but now I'm putting a

http://bugs.freedesktop.org/show_bug.cgi?id=13691 Maarten Maathuis <madman2003 at gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WONTFIX --- Comment #2 from Maarten Maathuis

Hi, I am new to the Asterisk world. I don't know much about the architecture, but I am involved in installing and configuring the VoIP system. My requirement is to build a VoIP system using the 4 input lines (ISDN up0 telephone lines), it must be possible to receive calls from outside through the 4 ISDN up0 input lines, and also possible for outgoing calls, conferencing .etc. I

Hi. My configuration is Elastix 1.5.2-2 (asterisk 1.4.24, libpri-1.4.3-5, dahdi-2.1.0.4-7 ) and OpenVox d210e connected to telco provider (Euro ISDN). Here is my /etc/dahdi/system.conf: # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=oslec,1-15,17-31 # Span 2: TE2/0/2 "T2XXP

I'm running an AsteriskNow V1.7.1 with both a PSTN connection and fax machine. Both are connected to a DAHDI board. I'd like to route incoming PSTN fax calls to the extension of the fax machine and process non-fax calls through different dialplan.logic. What's the best way to go about doing this? I've looked into Fax for Asterisk, bit I'm not sure that I want it or NVFax

Got this in the log, with no calls active. Is it a problem with my isdn line, or * ? [Mar 15 11:36:18] ERROR[29161]: chan_dahdi.c:8735 dahdi_pri_error: ACK received for '0' outside of window of '39' to '40', restarting [Mar 15 11:36:18] == Primary D-Channel on span 1 down [Mar 15 11:36:18] WARNING[29161]: chan_dahdi.c:2789 pri_find_dchan: No D-channels available!

[Dec 23 17:58:49] ERROR[3091]: chan_dahdi.c:8413 dahdi_pri_error: XXX Missing handling for mandatory IE 12 (cs0, Connected Number) XXX I am seeing the above error on DAHDI 2.1.0, asterisk 1.4.22 and libpri 1.4.7 I am using a TE120P card. I am also getting this VERY frequently: -- Channel 0/1, span 1 got hangup request, cause 16 -- Hungup 'DAHDI/0-1' Versus a normal hangup:

Hi, I'm experiencing some strange problems with out Digium card. First the details abount hardware and software: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) Asterisk 1.6.0.20 dahdi-linux-complete-2.2.1-rc2+2.2.1-rc2 libpri-1.4.10.2.tar.gz The problem now is that there are a number of clients that I call and suddenly the connection drops. Just a few seconds later the clients calls

Hi all, I'm trying to setup Asterisk trunk to Siemens HiPath 4000 V2.01 What would be the best way to do so? I am a bit confused because as far as I've understand this PBX doesn't support H323, but I saw somewhere someone who created a cornet trunk and it worked using H323. So if anyone knows what I need to configure I would appreciate it. I've read some information

On 12/17/08 I updated to 1.4.22 from 1.4.21... Now the CDR data isn't recording calls where the caller hung up while waiting on the Queue. Sample CDR data BEFORE the upgrade: "2008-10-30 12:46:47";"\"John\"