Displaying 20 results from an estimated 7000 matches similar to: "Asterisk and IPv6"
2008 May 20
7
Busy out a zap channel?
Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would like
to busy out that line. Since that line is the head of the hunt group I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
--
?Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director
2008 Feb 06
3
R2 with Alestra in Mexico...
I am trying to set up Astunicall 1.4.16 with a link from Alestra in
Mexico City. I have done everything I usually do for other links in
Mexico but this one simply will not send or receive calls. I just get
Protocol error.
Anyone has any experience with R2 and Alestra?
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001
2008 Apr 30
1
One way audio...
I have a big headache. I have an Asterisk server connected to an Avaya
PBX. Everything is working between those two. The problem is that I
have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the
Internet to the Asterisk server through a Fortinet firewall. When
calling from a PAP2T I get one way audio, the remote site can hear me
but I cannot hear them. If I do an "rtp
2007 Jun 06
4
meetme realtime
Hi
iam using 1.2.17
does any one have information meetme in realtime
and store in mysql i dont see any document
could some one help me
is this possible ?
ram
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070606/36d236c2/attachment.htm
2012 Jun 05
3
Another IP address to block
Yesterday a customer was attacked from the following IP addresses so
add them to your blacklist:
iptables -A INPUT -s 37.8.119.75 -j DROP
iptables -A INPUT -s 37.8.22.240 -j DROP
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not
2007 Sep 04
6
Overhead paging over IP...
I have a customer that has two buildings that are connected with a
fiber link. We have a single Asterisk server to cover both buildings.
Now the customer went and bought an overhead paging system for the
remote building and they want to integrate it with Asterisk. Is there a
device that can connect over IP or an ATA that has an audio output port?
The buildings are about 500 meters apart so we
2007 May 29
7
Problem on incoming call from Zap channel to SIP phones...
I have an Asterisk 1.2.16 server running CentOS 4.4 with a TE110P card
and an OpenVox A1200P card. Up to today everything was working
perfectly. The OpenVox card has 8 FXS and 2 FXO ports. The two faxo
ports are used for a GSM adapter and for an ATA connected to Vonage.
The problem we started noticing today was that the Vonage line will
receive a call and then cannot connect to any of the SIP
2010 Sep 03
3
How to tell if there is a transfer from CDR?
Is there any way to know if a call was transferred from reading the
CDR? Any relation in fields like UNIQUEID? Something that can be
scripted to make a special report?
--
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director de Tecnolog?a
+52-55-91169161 ext 2001
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type:
2010 May 20
3
Softphones on thin clients...
Does anyone know if you can use softphones on thin clients? I have a
new customer that wants to use Eyebeam (about 10 users) on a thin client
platform. Each user has a little box on their desk that has a USB port,
mic and headphone jacks and monitor.
I am worried about conflicts when running 10 softphones on the same
server since they will all try to use por 5060.
--
Telecomunicaciones
2010 Jul 05
7
How to Dialogic 240/JCT-T1 interface with Asterisk?
Hello all Asterisk Users,
This is my first post here.
We are in a process of moving Dialogic 240/JCT-T1 from old voicemail server
to Asterisk box.
Which card drivers do we need?
Please share experience if anyone have successfully configured Dialogic
JCT-T1 card with asterisk?
Only source proves that this card work with *
http://lists.digium.com/pipermail/asterisk-dev/2003-April/000244.html
2012 Feb 27
2
CDR Analyzer/Queue stats reporting
I've been tasked with finding and implementing a CDR/Queue analyzer to provide information to management about the call center's performance. My Google-fu seems to be returning a lot of things that are more or less abandoned projects. Does anyone have any recommended solutions for a CentOS 6 / Asterisk 10 "vanilla" server? Not opposed to something commercial, provided it
2006 Dec 20
5
Sangoma A101 with Unicall
I am having a problem trying to get a Sangoma A101 to work with
Unicall. I have installed the sangoma drivers and everything seems to
be well but when I try to run ztcfg I get the following error:
CAS signalling on span 1 conflicts with HDLC with FCS check on channel
16.
Here is my /etc/zaptel.conf
# MFC/R2 normalmente no usa CRC4
span=1,0,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
2008 May 21
4
addons-1.6 not seeing installed MySQL packages
Hi All,
I'm poking around with 1.6, tried to compile the addon package, but it
doesn't see mysql_config installed.
I have mysql-client, mysql-common and mysql-server installed. I'm
running debian etch.
Any suggestions?
Thanks.
JR
--
JR Richardson
Engineering for the Masses
2010 May 24
4
convert zaptel to dahdi?
I am trying to get a zaptel install converted to dahdi.
I can get dahdi installed, and the pseudo device even shows up; however, dahdi show channels shows me nothing. There is a TE122 and a TDM800 in there, and neither show up.
dahdi show status shows both cards, and dahdi tools show that the cards are there, working, and have no alarms.
What am I missing?
Michael Munger, dCAP, MCPS, MCNPS,
2010 Mar 02
6
Echo cancellation on DAHDI
Dear All,
How can we know the On board supports echo cancellation
I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
02)*board
all working fine but sometimes i got echo when user are calling a PRI.
is there any way to know on board echo cancellation .
regards
Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2007 Jul 17
7
Asterisk 1.4, Unicall and Nextel...
I have a customer that is complaining that any call coming in from
Nextel gives a fast busy. We are running Asterisk 1.4.7.1 with Zaptel
1.4.3 and all the MFC/R2 patches and libraries. All other calls go out
and come in, just Nextel seems to have this problem. The phone company
technician connected a PBX emulator on the line and that one could
receive the calls from Nextel.
The E1 is provided
2011 May 07
3
record call from iax to sip
Hello List,
i need to be able to record the call transferred from iax extension to sip
extension
when i call the sip extension from the IAX extension i can record the call
without any issue
but when i receive a call from customer in IAX and i transfer this call to
SIP client
the conversation between customer and IAX client is recorded but the
conversation between customer and sip extension is
2010 Apr 20
4
How to record a call in a single file when transfered...
I have a customer that needs to record all calls coming in and out.
The problem I am having is when a call comes in to the operator and it
is transferred to another extension. The first mixmonitor begins
recording when the operator picks up but the recording stops when the
call is transferred. I need to have a single recording for the
complete call no matter how many times it is transferred.
2009 Dec 08
5
Easy way to see what dahdi channels are being used
Hi,
I have just recently been using DAHDI, and I wanted to know how to monitor
capacity.
Let's say I have two DS1 (23 channels) coming in, one for Florida (let's
say) and one for New York. How can I get a reading of how many channels of
each T1 port is being used at any given moment? Ideally, have two values,
one for each T1.
dahdi show channels doesn't show outgoing
2010 Oct 14
5
Routers that do not show external IPs...
I have a customer that has a Trendnet TEW-435BRM router which has the
bad habit of rewriting all external connections so the Asterisk server
only sees the IP address of the router itself. Up to today this has not
been a problem since all extensions are on the local network but now
they want to have a couple external IP phones (SIP).
I opened up the ports on the router and my phone can register.