similar to: Archive of security advisories?

Is there a way to busy out a Zap channel? I have a customer who is having problems with a line connected to a TDM800 card and we would like to busy out that line. Since that line is the head of the hunt group I cannot simply disable that channel, I need to busy the line so calls will come over the other lines. -- ?Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director

I have an Asterisk 1.2.16 server running CentOS 4.4 with a TE110P card and an OpenVox A1200P card. Up to today everything was working perfectly. The OpenVox card has 8 FXS and 2 FXO ports. The two faxo ports are used for a GSM adapter and for an ATA connected to Vonage. The problem we started noticing today was that the Vonage line will receive a call and then cannot connect to any of the SIP

I have a customer that has two buildings that are connected with a fiber link. We have a single Asterisk server to cover both buildings. Now the customer went and bought an overhead paging system for the remote building and they want to integrate it with Asterisk. Is there a device that can connect over IP or an ATA that has an audio output port? The buildings are about 500 meters apart so we

Does anyone know if you can use softphones on thin clients? I have a new customer that wants to use Eyebeam (about 10 users) on a thin client platform. Each user has a little box on their desk that has a USB port, mic and headphone jacks and monitor. I am worried about conflicts when running 10 softphones on the same server since they will all try to use por 5060. -- Telecomunicaciones

I have a customer that needs to record all calls coming in and out. The problem I am having is when a call comes in to the operator and it is transferred to another extension. The first mixmonitor begins recording when the operator picks up but the recording stops when the call is transferred. I need to have a single recording for the complete call no matter how many times it is transferred.

I am having a problem trying to get a Sangoma A101 to work with Unicall. I have installed the sangoma drivers and everything seems to be well but when I try to run ztcfg I get the following error: CAS signalling on span 1 conflicts with HDLC with FCS check on channel 16. Here is my /etc/zaptel.conf # MFC/R2 normalmente no usa CRC4 span=1,0,0,cas,hdb3 cas=1-15:1101 dchan=16 cas=17-31:1101

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am trying to set the CDR(userfield) to a certain vaule using the application map of features.conf but I am not able to do it. When I receive a call I would like to tag it with a client code (3 digit numeric) so I can referenci it later from the CDR. I have edited features.conf with something like: code => #111,self,SET(CDR(userfield(111)) or

I have a customer that has a Trendnet TEW-435BRM router which has the bad habit of rewriting all external connections so the Asterisk server only sees the IP address of the router itself. Up to today this has not been a problem since all extensions are on the local network but now they want to have a couple external IP phones (SIP). I opened up the ports on the router and my phone can register.

I am trying to set up Astunicall 1.4.16 with a link from Alestra in Mexico City. I have done everything I usually do for other links in Mexico but this one simply will not send or receive calls. I just get Protocol error. Anyone has any experience with R2 and Alestra? -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001

> Asterisk Project Security Advisory - ASA-2007-013 > > +----------------------------------------------------------------------------------+ > | Product | Asterisk | > |----------------------+-----------------------------------------------------------| > | Summary | IAX2

> Asterisk Project Security Advisory - ASA-2007-013 > > +----------------------------------------------------------------------------------+ > | Product | Asterisk | > |----------------------+-----------------------------------------------------------| > | Summary | IAX2

Yesterday a customer was attacked from the following IP addresses so add them to your blacklist: iptables -A INPUT -s 37.8.119.75 -j DROP iptables -A INPUT -s 37.8.22.240 -j DROP -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not

I have a customer that needs an Asterisk server to sell minutes for cell phones in Mexico. I do not see a problem with that since he will get the calls by SIP and then use GSM adapters to get the calls into the GSM network. My problem is that his customers only want to be identified by IP and not by a username and password. Is there a way to authenticate just by using an IP address? --

I just upgraded from 1.6.0.14 to 1.6.1.6 and now my realtime static configuration for extensions.conf will not load. All other realtime configs work (SIP, IAX2, Voicemail). I cannot find any reference or documentation about the structure of the realtime static database for 1.6.1.x but I have used the same table structure since 1.4.x. CREATE TABLE `ast_config` ( `id` int(11) NOT NULL

Is there any way to know if a call was transferred from reading the CDR? Any relation in fields like UNIQUEID? Something that can be scripted to make a special report? -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type:

Hi iam using 1.2.17 does any one have information meetme in realtime and store in mysql i dont see any document could some one help me is this possible ? ram -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070606/36d236c2/attachment.htm

I need a refresher course on how many licenses I need to buy. I have an Asterisk server that receives calls by SIP (G729) and then sends them to the PSTN via 32 Zap interfaces on an Astribank. I cannot remember if the license is per channel or per call so I do not know if I need 32 or 64 licenses for this application. Could anyone please remind me? -- Telecomunicaciones Abiertas de M?xico

I just upgraded a very old Asterisk installation to the last 1.2.31 I can find in Asterisk.org site. Now for some reason my IAX clients cannot connect to the server. I can do a "iax2 show peer iaxmodem1" and I get this: * Name : iaxmodem1 Secret : <Set> Context : oficina Mailbox : Dynamic : Yes Callerid : "" <> Expire

I want to be able to send a prerecorded message to the person I am calling. I know that you can use the application map to do this. Just to test I enabled the testfeature example that is in the features.conf file. When I hit #9 during a call the other user does not hear the monkeys, they only hear a series of beeps. I have tried with different soundfiles and they all give the same problem.

I am using Asterisk 1.4.4 on a CentOS 5 machine for a small call center with 6 agents. I am using realtime for queues and sip and I am also trying to use realtime static to load agents.conf. The only problem I am having is that no agents are loaded when I start Asterisk. I have to manually do a "module reload chan_agent.so" so the agents get loaded from the database. Obviously