similar to: DTFM Detection issues

Hi list, I'm having trouble with DTFM tones detection. Usually, some tones are being received duplicated in Asterisk, some not. As you can imagine, that's a very big problem involving IVR menu options, Meetme conferences protected with passwords, and so on. We are currently using DAHDi 2.2.0.2, module wct4xxp, which is managing a Digium TE220B card, with a hardware echo canceller

Hi, I'm trying to get a TE212 working on a Dell PowerEdge 1850 running Debian etch using the latest release of libpri (1.4.0), zaptel (1.4.2.1) and asterisk (1.4.4). The initilization of the Octasic echo canceller seems to fail when the wct4xxp module is loaded. [...] VPM450: echo cancellation for 64 channels Failed to open chip, code 00103017! VPM450: Failed to initialize [...] By looking

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hi, I'm having problems with a TE420P card, in which I cannot make calls using spans 2 through 4. After a couple of days of working correctly, spans 2, 3 and 4 start failing (can not make calls). The system is configured to work with SS7. After the ACM message goes out, immediately a REL message is returned. I searched for error messages in /var/log/messages and could not find a clue

I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS). These connect to a Digium TE210P card. I'm running kernel 2.6.10 and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today. The results are the same for all versions: Right after I reboot, and modprobe wct4xxp, my analog phone connected to port 13 of the first channel bank (first FXS port) gets a dial

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

My DTFM is not working in current CVS-stable *-1.0.6 and *-1.0.7 but it works in version 1.0.5 (was working with 1.0.3). I'm using SPA-3000 and dtmfmode=inband -- #Joseph

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3050 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/33760a15/smime.bin

Hello, I am sorry that I post questios regarding Broadvoice here, but unfortunalelly their support is very very bad. The simply do not answer to any emails or telephones. Last week something happened to their system. I was not able to receive incommming calls etc. Now it is back, but the voice quality is terribe and the DTMF is not working.(Is the inbound mode the correct one?) Does anybody knows

Hello,Maybe I don't understand what DTMF in ASCII means but I can't make my record stop using this syntax in a PHP agi script :fwrite(STDOUT, "RECORD FILE /var/lib/asterisk/ENR/jeanpaul wav '#' 15000 BEEP s=3000\n");The php syntax isn't a problem because I really start recording, I have a beep, the record can't long more than 15sec and after 3sec of silence my

We have some guys working in the US who can't always dial back to our company in Europe easily (lots of clients require authorization to make international calls), so I set up the following: - ipkall.com number links to a FWD number - office Asterisk box registers with FWD Then I programmed Asterisk to accept office extension number using DTFM tones. This works OK. Then I programmed

Hi I got the 2nd Gen firmware upgraded on the TE405P. I recompiled after putting in the upgraded board but did not change any conf, but the spans become active but will not come up. I guess I am missing something or are the any changes to the zaptel/libpri software that is required. I cannot find any info about this or does this new firmware only work with latest CVS. I am using 1.0.9 with

Hi anyone have a idea for debug my digium TE405P card ? My zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = fr defaultzone = fr My Zapata.conf: [channels] language=fr context=from-E1 switchtype = euroisdn pridialplan = unknown signalling = pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

Hi, I am about to pull my hair out after trying to get our PRI up and working. We are switching from a Cisco gateway to an Asterisk box which provides the 23 phone lines for our office. So, because the Cisco gateway is working I can assume I have all the settings right (b8zs, esf, dms100, etc) and the PRI is live (because we are switching over). When dialing from PSTN, I get busy signal. When

I have the following software installed in a Centos Box with a TE420 (5th Gen) card. . Centos 6.5 64-bit . Asterisk 1.4.22 . dahdi-linux-complete-2.9.1.1+2.9.1 . libpri-1.4.14. Even without plugging in the ISDN into span 1, all 4 spans are flashing red. Plugging an E1 into span 1 makes no difference. My system.conf is just simply: loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15

Hello ! I 'm using a TE405P with a HW echocanceller module attached on it. dahdi version is dahdi-linux-complete-2.2.0.2+2.2.0. As far as I know, the fax tone detection is done on the FW board. How can I verify that the echo canceller has been turned off ? When I do a cat /proc/dahdi/1 for span 1 I see still the VPM450 entry near the channel although this was a fax call with CED tone.

So, I've compiled and installed libpri-1.4.11.5, dahdi-linux-complete-2.4.1+2.4.1 and asterisk-1.6.2.17.1, but chan_dahdi is not getting built. If I do a "make menuselect" in asterisk I see it listed with XXX, meaning that dependencies are not met. XXX chan_dahdi Depends on: res_smdi(M), dahdi(E), tonezone(E), pri(E), ss7(E), openr2(E) res_smdi gets built fine, dahdi is

Hello everyone. I have server with 2E1 PCI card, asterisk 1.4.35, dahdi 2.4.0, libpri 1.4.12-beta2. One PRI trunk looks to PSTN and take a clocksource from telco. Another trunk looks to PBX with DECT system. Some outgoing calls from asterisk to PSTN drops. The last message that exists before hanging up process is: DEBUG[28467] channel.c: Got a FRAME_CONTROL (8) frame on channel DAHDI/... This

I'm trying to install a TE410P this is what happens with compiled zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ this is my zaptel.conf (checked with the provider the values): span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=it defaultzone=it then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : Sep 30 16:12:40 localhost kernel: Zapata