similar to: ZA16E and FXO-200 modules with asterisk

Hello All, Anyone who has experience using Digium analog card clones from any of the following: 1. Zycoo 2. CTVON 3. Chinaroby 4. Etross 5. Immediate IT (IIT) 6. Realtone and can give review which one is good quality with easy configuration and error free running. Also since some of these manufacture only analog cards, does anyone have any experience using these in a single system with digital

The value of 14800 is correct. I had issues with my TDM400p with 2x FXO's installed and using the Xlite client. I could not get the echo stable at the initial call. Changing to a hard phone made everything work correctly. I still had problems with the off location I called, but mostly worked great. To see the TX gain I created an extension with the Milliwatt command attached to it and called

To start ztmonitor in quantitative mode you do the following. Assuming you are running Asterisk V1.0.9 you need to edit one line to ztmonitor.c in /usr/src/zaptel as per patch 2783 http://bugs.digium.com/bug_view_page.php?bug_id=0002783 Change line 261 fprintf(stderr, "Usage: ztmonitor <channel num> [-v] [-f FILE]\n"); to fprintf(stderr, "Usage: ztmonitor <channel

Good day list, I am feeling extra stupid this Monday morning and am hoping someone can come to the rescue. I am trying to use the ztmonitor utility on my wildfire 4 FXO card. and have read the following from the wiki. *********Wiki start******** If you set this to yes, use ztmonitor to adjust the rxgain and txgain. Ztmonitor isn't installed by default; but it is included with the Zaptel

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

Hardware is an SM56 card (X100P clone). When the line hangs up, ztmonitor displays full bar (or whatever maximum allowed by rxgain) in RX. It only drops zero when the line picks up (and remote was silent). Is this something of concern? The zap channel seems to work despite echo. Additionally, what's the objective of tuning with ztmonitor? I mean, what would indicate an optimal level?

I try to compile zaptel, without much success. I followed the guidelines in http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation making dependencie results in: asterisk:/usr/src/linux # make dep *** Warning: make dep is unnecessary now. and make tells me make[1]: *** No rule to make target `modules'. Stop. asterisk:/usr/src/zaptel # make clean rm -f torisatool makefw tor2fw.h rm -f

I wouldn't normally post this to the asterisk mailing list but I'm really stuck... I've been trying to get meetme working on and off for a few months now but I always hit a brick wall when trying to compile. I keep seeing this... make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

Hi all, I'm unable to complete the installation of zaptel. I did a checkout today from cvs. When I do make clean; make install. It gives me an error at this portion of the installation: /include/linux/modversions.h -DSTANDALONE_ZAPATA -c wct4xxp.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE

Dear list, I am back with my problem compiling zaptel 1.0.9 . I am running SUSE 9.3, with kernel linux-2.6.11.4-21.7 I have the kernel sources on disk. YAST tells me they match the compiled kernel. > # ls -l /usr/src >total 1 >drwxr-xr-x 7 root root 280 2005-07-16 13:24 . >drwxr-xr-x 12 root root 344 2005-07-16 11:27 .. >drwxr-xr-x 25 root root 736 2005-07-16 12:12

Anyone seen this and know how to fix it? (note the Assembler messages at the end). Thanks in advance: server# make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

Err, stupid me. Seems like the phone is hungup, but when I start ztmonitor, the line is picked up. I guess the line in India is pretty loud b/c the RX bounces off the charts, changed it to (-4) and all my problems are solved. Regards, Min Chang On 4/14/06, Kyle Sexton <ks@mocker.org> wrote: > > Have you tried putting a Hangup in your extensions.conf? > > > > On 4/13/06,

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

If you have echo on the X100P's Mark setup chan_zap to pretrain the echo can, but it had a few issues until today which Mark nailed down the bug that caused the DTMF to be unreliable. Ok here is how you would do it: in your zapata.conf.sample: ; In some cases, the echo canceller doesn't train quickly enough and there ; is echo at the beginning of the call. Enabling echo training will

Hello, In my quest to figure out the source of the random echo on our shiny new asterisk install, I have been using ztmonitor on the TDM400p channels for the good part of today. I have 2 TDM400p cards with 8 FXO modules and 6 pots lines connected to them (last 2 channels are unused but configured in zaptel). Even when the lines are onhook, the Tx values settle down to 0 but the Rx values still

Chuck, Thank You I'm also going to try CentOS 3 The problem is I have SATA HDD and running in to trouble getting Linux installed. Will update after I test Ver 3 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chuck Bunn Sent: Monday, March 13, 2006 12:45 PM To: Asterisk Users Mailing List -

I am having a problem compiling zaptel on my Arch Linux (linux 2.6.10) system: CC [M] /home/sbn/src/zaptel-1.0.3/wcfxs.o /home/sbn/src/zaptel-1.0.3/wcfxs.c: In function `wcfxs_interrupt': /home/sbn/src/zaptel-1.0.3/wcfxs.c:473: sorry, unimplemented: inlining failed in call to 'wcfxs_proslic_check_hook': function body not available /home/sbn/src/zaptel-1.0.3/wcfxs.c:810: sorry,