similar to: B400P card crashes conncection

Hi, I've run into a veird problem. I'm using a B400P BRI and an A1200P card with dahdi (2.2.1) driver. The dahdi_scan shows the each moduls and spans, everything seems fine. With dahdi_genconf I made the config, set up the channels in chan_dahdi.conf, but after reboot, the two card changes the order, (originaly the B400P is the first (closer to the processor) and A1200P is the

Hi, I run into a problem and I'm not shure what do I misconfigure. I've a B410P ISDN card with bri_cpe signalling and two Openvox (A1200, A800) cards with fxo_ks signalling, all with dahdi drivers. I can receive fax from a public number, but I can't send fax. The CLI says it picks up the line but no dialing. I tried the extension with an analog phone, it works fine, I can dial

Hi, I need a feature from asterisk with dahdi channels, if there is an incoming call, it should ring on several dahdi channels. My channels look like: OFFICE1=DAHDI/13,,rtT OFFICE2=DAHDI/14,,rtT If I add this line: exten => 12345678,1,Dial(${OFFICE1}&{OFFICE2}) only OFFICE1 rings. If I change it to exten => 12345678,1,Dial(DAHDI/13&DAHDI/14) DAHDI/13 and 14 rings together,

hello: thanks for Tzafrir Cohen for dahdi testing. I installed dahdi-2.1-r3c svn code and asterisk1-6 for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board, i set it as TE mode, but after start wcb4xxp, but it show the port is NT mode. to detect the TE mode, I modefy the code in base.c

Hi, I have a B410P card with bri_cpe signalling and two Openvox analog card (A1200p, A800P) with fxo_ks signalling. From the ISDN we have Point-Point 10 connection with a 10 public phone number range. If I receive a public call, the asterisk recevies the last two digit from this range, so it works, I can receive all the 10 numbers. If I'd like to dial from an exten which I have to

Hi, Can someone help me formulate MySQL Query(s) which will help me extract the following details for a given DID (date range can be excluded for simplicity). Date-Time DNID (I am recording this is `userfield`) CLID time-1 (when call was received) time-2 (when call was answered by agent) time-3 (when call was hung-up) My Call flow is as follows: - Caller dials a DNID - Call enters queue - Call

Hello, I have previously open a topic on the mailing list about deadlocking on Asterisk 1.2.35. After upgrading to 1.4.29.1 we still experienced the same problem : Mar 5 12:05:56] DEBUG[8647] channel.c: Avoiding initial deadlock for channel '0xb7689840' [Mar 5 12:06:41] DEBUG[7130] channel.c: Avoiding deadlock for channel '0xb7c04788' [Mar 5 12:06:41] DEBUG[7130]

Hi All, I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT mode but actually I wasn't able to get it working. I've another standalone PBX, it's a Panasonic model, which works fine connected to the same port. The BT connected to a UK BT BRI line works quite fine after roughly a minute once connected. The PBX can be seen at

About two weeks ago there was a thread about asterisk suddenly dying - I posted a response that the same happens to my asterisk about once a month, sometimes more. Someone suggested using 'safe_asterisk' (and get hold of a core dump) which sounds like a good idea, but one thing I can't figure is how to get "module reload app_queue" executed automatically at startup?

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hello I'd like to build myself an Asterisk server for SOHO use. Intel's D201GLY2 motherboard (http://tinyurl.com/ddarzp) looks like a very good deal, but I'm concerned about two things: 1. Will an A400P (from OpenVox, but supposed to be Digium-compatible http://tinyurl.com/ck6nfu) fit with a PCI riser, or will the CPU heatsink/fan be in the way? I downloaded the PDF from

Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment***************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ****************************************************************** In my case , I set prot 1 and

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes - and then Asterisk? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm

Hi all, As i tested with Asterisk+dahdi+libpri with openvox BRI with NT mode, the ISDN phone does not work. There is the setting and error. ***********************Enviroment********************************** Asterisk-1.6.1.18 dahdi-linux-2.3.0.1 dahdi-tool-2.30. libpri-1.4.11.2 CentOS-5.5 OpenVox B400P ******************************************************************** In my case , I set prot 1

Hello all What I'm looking for is some plain speaking advice on ISDN. Currently using 4 analog lines connecting via a four port TDM400P FXO card. We need to physically move our installations, and on requesting the analog lines be moved - our telco (BT) is suggesting we replace our analog lines with ISDN2. We would have 3 x ISDN2 connections, giving us six voice channels. They've

Hi All, How can it be done it logrotate configuration that I wanted to have the logs in six (6) month retention period? I have the following logs and directories of mysql. [hostname]# ls /var/log/mysql/ 2010.05.01/general.log 2010.05.01/error.log 2010.05.02/general.log 2010.05.02/error.log 2010.05.03/general.log 2010.05.03/error.log Is it possible that the output after doing logrotate could be

Hello, Using libpri-1.4.7 and asterisk-1.6.0.1, I've got "Unknown signalling method 'bri_cpe" when "module load chan_dahdi.so". Googling with "chan_dahdi bri_net" don't help much. Shall I upgrade to 1.6.1rcXXX to get 'bri_cpe" support ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, we upgraded an Asterisk 1.4 with mISDN to 1.6 with chan_dahdi. Due to problems with iax channel posted earlier, we wanted to switch back to 1.4 version. Server has 2 HBA cards, everything is running fine with 1.6, bri_cpe is recognized and the 7 euroISDN channels are running well, ingoing and outgoing. Now we installed 1.4.38 version and no more ISDN. In logs we found this: [2010-12-24

Is there a recommended way to find out the cause of DIALSTATUS = CONGESTION for PRI/BRI channels? Currently I am evaluating the DIALSTATUS variable and I also count the active ISDN channels for the ISDN trunk in question. Counting the active ISDN channels seems somewhat clumsy as the mapping to a specific trunk must be done by hand (or write even more code). I have a setup where outgoing calls

Sir, i am using goautodial server , bri card is showing ok but when i try to call that showing below , This configuration is in doing in dubai , so kindly help me how can connet the call from this , what is my mistake is in this :::chan-dahdi.conf [channels] #include dahdi-channels.conf language=en context=default usecallerid=yes hidecallerid=yes callwaiting=yes usecallingpres=yes