similar to: meetme / upgrade to 1.6.2.6

So I setup the MeetMe application in Asterisk Assigned an extension to it. When one of my SIP phone dials the conference extension, they get a message "you are the first one in the conference", so far so good. When the 2nd SIP phone dials the conference extension, they get a busy signal Now I know that you have to have a Zapta device to enable conference application. I have an X100P (1

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

With 1.6.1, I'm trying to set up a test of meetme for creating dynamic conferences. cat meetme.conf [rooms] conf => 600 extensions.conf: [meetme] exten => 2663,1,MeetMe(,D) exten => 2663,n,Hangup() exten => 2666,1,MeetMe() exten => 2666,n,Hangup() What I'm expecting is to dial 2663, get a conference room number ( 600, I suppose since it's the only room ), and set

Hi, I am running Fedora 7 VM. On an earlier configuration with zaptel and Asterisk 1.4.21 , meetme worked alright. I upgraded to Dahdi and Asterisk 1.4.26, and the result is choppy sound via Meeme, while a simple Musiconhold works OK with descent audio quality. So I am sure its a Dahdi_dummy problem. Running dahdi_test gave me very poor results. Opened pseudo dahdi interface, measuring

Hi Guys, sometimes if one caller or many callers are in a meetme Room and a new one join the room, then he or another caller into the same room where kickt from the room. It's very strange for me and in logs (full) I can't see anything. is it possible to log more from meetme.c ? can anyone help me and maybe someone has also the problem as i and have an solution. I use: asterisk-1.6.2.7

Formerly on a thread called [asterisk-dev] Where to find the code of application Bridge On Wed, May 6, 2009 at 7:38 AM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote: >> Can someone please tell me in which file the code for the application to >> be found? I was not able to find a file named app_bridge.c in the folder >> apps. > > app_bridge.c ? app_confbridge.c ?

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

I'm trying to determine the capacity of my host running Asterisk 11.8.1 on CentOS 6.5. The host is an Intel E3-1240v3 with 8GB RAM, an SSD, and gigabit Ethernet. The primary application will be bridging groups of users using meetme(). I'm using 2 boxes -- 1 to initiate calls using call files (box1), and 1 behaving a bit more like a production box -- bridging calls (box2). The call

We recently updated our Asterisk (1.4.24) box from Zaptel (1.4.12.1) to Dahdi (2.1.0.4). Everything seemed to go smooth with the exception of meetme. Meetme seems to not be able to find a zap channel for conferencing. We use voice introductions in our conference bridge and it seems to break that feature. The error from the console is.... # app_meetme.c:2593 find_conf: No Zap channel available for

Hi, I was switching from zaptel to dahdi and got latest SVN from everything. Compiling works fine. kernel module dahdi_dummy is loaded. /dev/dahdi/pseudo exists Trying to go into a meetme does not work: [Aug 11 14:04:45] -- Executing [8001 at client_int_sgmobile:1] MeetMe("SCCP/6000-00000001", "444|dcIM") in new stack [Aug 11 14:04:45] WARNING[4184]: app_meetme.c:775

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

Hello All, Asterisk: 1.8.13.0 Dahdi : 2.6.2 Kernel : 2.6.32-431.3.1.el6.i686 #1 SMP Fri Jan 3 18:53:30 UTC 2014 i686 i686 i386 GNU/Linux OS : CentOS 6.4 When I show meetme room details using "meetme list" command it shows Minus in activity column. Any Idea. >meetme list Conf Num Parties Marked Activity Creation Locked 54682 0002 N/A

Hi Asterisk Users, we are using Asterisk 1.4.18.1 on debian 4.0 etch, pwlib 1.10 and openh323 1.18. We are using MeetMe for conference calls and with two participants there is no echo problems, but with more than two participants there is a lot of echo that sometimes disappear for a short time and all function well. Someone have some suggestions?? Do you ever used app_conference

hello All, i have one issue with Asterisk Meetme Application i am recording through Meetme channels through option *'r'* and format for recording a file is '*wav*' lines used is DAHDI version 2.1.0.4. and asterisk version 1.6.0.5. i have very strange problem of meetme_recording , once conference starts recording file having a *recording is 2x faster *than normal recording .

Hi when i use MeetMe, i have this errors: app_meetme.c: Unable to open pseudo device Where is the problems ? i have too warning and error into my logs: [Nov 1 07:26:17] WARNING[18544] res_musiconhold.c: Unable to open pseudo channel for timing... Sound may be choppy. [Nov 1 07:26:17] WARNING[18544] config.c: Realtime mapping for 'iaxpeers' found to engine 'mysql', but

Hi, I didn't notice on my first answer, but we are on the -dev list and this is not related to asterisk code developing. I will answer you on the -users list, so we can continue the discussion there. Cheers, -- Ing. Miguel Molina Grupo de Tecnolog?a Millenium Phone Center Anahi Ludue?a escribi?: > Hi, thanks Miguel. > I have another question: if I want to call the GoSub

I sent a query about this before, but have some further information and am hoping somebody has a suggestion as to what to try next to debug this. I'm using an Asterisk box primarily for MeetMe conferencing. There are two sources: TDM via two Q.SIG T1's and SIP phones. Conferencing works fine between TDM channels. But when a SIP phone calls the conference, there's no voice path *to*

Hi list, I was going through my dialplan today and found these 2 oddities with meetme using DAHDI to join the conference. 1. Although music on hold is indicated, I don't get any sound until I press *. Then the conference menu plays and all is well except - 2. According to the instructions, pressing 8 should leave the conference. No dice. Problem persists with 1.4.30 Any

Hi, Using MeetMee(1234,M) on asterisk 1.6.2.9 (debian/testing) we have terrible sound: the MOH is unrecognizable and speakers can't be understood; it sounds "ghostly". However the prompts ("your are the only one in this conference, etc.") sound fine. Our server has a Digium T410P card with two E1 lines going in and the wct4xxp dahdi module. Any idea?

I want to have Asterisk Dial individual numbers and play a recording if each answers. If they don't answer then the code rolls to the next number. Should I set up a spreadsheet somewhere and load with the numbers? Or, an AGI script? 1. Dial number 1 2. If connect, then play message 3. If connect, finish message and move to next number 4. Dial 1 - 10,000 in succession