similar to: Subscribe to a MWI when acting as a SIP client?

Hello list members, We're trying to get MWI notifications on our ATA device and we set it to send SUBSCRIBE messages to Asterisk, but it gets UNAUTHORIZED messages, despite the fact that we set the following lines in its settings in sip.conf: subscribemwi=yes mailbox=21 at from-extensions We need help in understanding how this works and what we are doing wrong. This is the SIP debug

Hello all, I have an Asterisk installation with Kamailio using realtime integration. I have gotten my clients to register, but there is something odd about the sip message flow with some of my clients. My clients are Zoiper and Asterisk is 11.10.2. When I set 'Subscribe to MWI' value to 'both', after a normal, successful registration Asterisk begins to send REGISTER messages to

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

I've gotten nothing from http://bbs.atcom.cn on this so far. Perhaps someone on the list has experience with this. Is there a way to get MWI support for PA168V-based ATAs? Apparently some IP phones based on the PA168V chip has this support already (Atcom AT-320 for example) by configuring Asterisk with 'mailboxdetails=yes' in iax.conf. On my ATA, however, it does nothing. Any

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the 480i

Hello - I have just purchased an Aastra 9133i SIP phone for testing with Asterisk. Its a little flakey but overall is a far superior phone to the others in the $179 range. I have an issue regarding the message waiting indicator. The phone does not seem to respond to the "NOTIFY" command from Asterisk. Searching archives seems to indicate that this was previously an issue on the

Before I go down a rabbit hole, does the mwi publish/subscription work for non SIP phones? For instance, I have a single voicemail server, connected to multiple asterisk boxes via SIP. On each of those servers, there are a mix of SIP and SCCP phones attached. Currently, I'm using res_xmpp to distribute mwi from the voicemail server to the endpoint servers. Would this type of setup work

Thank you Melissa. I love the phone but the dial keypad is a little bouncy. I was hoping for a more solid feel like on the analog PT390's or my quality standard, the Nortel 9417CW. Other than the MWI problem, I'd like more documentation on the configuration paramters. I have found little online configuration documentation other than very basic stuff on the Sayson website. I'd

Hey there. I've been working on a project to integrate Asterisk with Exchange Unified Messaging via sipX using large parts borrowed from: http://blog.lithiumblue.com/2007/04/accessing-exchange-2007-unified_29.html ... and everything works surprisingly well. The one problem I have is MWI, or a lack thereof. Exchange 2007 doesn't support MWI of any kind (!), so I've been looking into

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some

Hi, I am trying to utilize MWI with sip channel. when my client sens a SUBSCRIBE to asterisk I get info that user not found: <-------------> [Jan 28 11:49:02] --- (19 headers 0 lines) --- [Jan 28 11:49:02] Creating new subscription [Jan 28 11:49:02] Sending to 192.168.129.38 : 7060 (no NAT) [Jan 28 11:49:02] Found peer 'hellboy' [Jan 28 11:49:02] Looking for hellboy in routing-sip

I have a Sipura 962 endpoint on Asterisk 1.4 where the MWI works perfectly, however my theory is that it should be broken. Obviously I'm wrong but "Sip show subscriptions" does not show the endpoint subscribing to the MWI status on Asterisk, even though all of the other endpoints on the system DO subscribe for their respective mailboxes, including SNOM & Polycom endpoints.

Hello, Running Samba 3.3.10 on FreeBSD 7.3. Cannot copy a folder with a subfolder and 10 files in the subfolder from an OSX 10.6.4 client to a folder on the Samba server. What happens is that the folder gets copied but not the subfolder and its files. root at aries:/usr/local/etc# testparm Load smb config files from /usr/local/etc/smb.conf Processing section "[homes]" Processing

Hello I am running the following setup in order to make VoIP calls at home. Home Phone <-> SPA3000 <-> Asterisk Home <- IAX2 over Internet <-> Asterisk Office The voice mail for Home Phone is hosted on the Asterisk Office machine. I wanted to have a way to check the status of my voicemail on my home phone directly. In order to do so, I've patched both Asterisk Home and

? HI ? I have asterisk 1.6.13 running. My ATA are connected via vpn (openvpn) ? Out going calls from asterisk to the ata works fine Incoming calls from the ata to asterisk cuts off with the error msg ? Maximum retries exceeded on transmission 70854efe-4157e3a8 at 10.168.7.103 for seqno 102 (Critical Response) -- See doc/sip-retransmit.txt. [Dec? 6 13:52:43] WARNING[3921]: chan_sip.c:3858

The 7960's have an envelope that appears in the display next to a line which has voicemail. Also, the MWI light is a logical OR of all the defined lines. Is there a way to tell the phone NOT to display the MWI for certain lines but retain the envelope for all? If you get enough VM on busy lines then the light tends to lose meaning and you may as well have it on all the time! I'm

Hi, I have an Asterisk behind an OpenSIPS proxy. The proxy handles registrations and also SIP SUBSCRIBE for MWI. The Asterisk are configured to send NOTIFY to the proxy even when the SUBSCRIBE haven't been received. I can configure a user in sip.conf that works: [az5134939706] type=friend host=xxx.xxx.xxx.xxx (IP of proxy) port=5060 nat=no mailbox=1234 at customer subscribemwi=no

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

Hi Joshua > The chan_pjsip module doesn't prevent that. You'd need to provide the > full SUBSCRIBE now that it is actually finding the endpoint and coming > in. Ok, let's see if we can solve the mystery.. pjsip.conf [endpt-home](!) type=endpoint disallow=all allow=g722 allow=alaw allow=gsm ice_support=yes context=from-home allow_subscribe=yes