similar to: Fax Over PRI connected to a Sangoma card - Fax machines connected to Sip Mediant AudioCode

Hello my friends, I want to make fax work in the following scenario: My versions are: Asterisk 1.4.21.2 WANPIPE Release: 3.4.7 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P The E1 pri is connected to our Sangoma A102DE, we also have a SIP Mediant Audiocodes 1000 where we have some fax machines connected to fxs ports, what we need is to make fax machines through mediant

Hi, I am configuring an audiocodes Medant1000 to talk to my asterisk box. So far I have successfull in landing a single call from mediant to my *box. my sip conf is as follows: [general] context=sip bindport=5060 bindaddr=0.0.0.0 srvlookup=yes [3911700] type=friend host=dynamic dtmfmode=info secret=blah context=sip where 3911700 is my E1 telephone no. in my extensions.conf I have exten =>

Does anyone have any information for me? Welinghton. Citando Welinghton Magno Guimaraes <welinghton.guimaraes at ufvjm.edu.br>: > Hello! > ? > I am setting up an Asterisk server with a Mediant 1000 (Audiocodes) > to make external links. Does anyone have any manual or instructions on > how to proceed? > ? > Asterisk ?=>? Mediant 1000 (AudioCodes) ?=>?

I sent this yesterday, but saw zero traffic, so I think it got lost in the ether, so I'm sending again. I'm having an issue using Asterisk 1.2.14 and an Audiocodes Mediant 1000 ISDN gateway. For the most part, everything is working except for attended transfers. When I do an attended transfer, and complete the transfer before the 3rd party answers, the PSTN side hears dead air until the

Hi FOlks, I am trying to setup remotely an "AudioCodes Mediant 2000" MG Module 2 to work with Asterisk through SIP or H323. But since I don't the product manual, it's being a little hard. Anybody would the manual in PDF(file or URL) to indicate to me? Thanks a lot, Isamar

I just put in a Audiocodes Mediant 1000, which seems to be working well except for one annoyance. I am using Polycom 501's and 601',s and if I do a supervised transfer of a PSTN call where I complete the transfer before the 3rd party has answered, the PSTN party hears dead air until the call is answered or goes to voicemail. I'm not really sure where to start my troubleshooting. Any

Greetings... I'm working on getting an AudioCodes Mediant 2000 big box o' PRI's going with Asterisk, and am running into a problem with DTMF handling. The box is sending DTMF packets to Asterisk as INFO packets, and they are apparently being seen by Asterisk. However, the DTMF knowledge doesn't seem to actually do anything -- the VM system doesn't recognize the digits,

Dear ALL I have audiocode MP -124 with configure in asterisk Endpoint configuration means every analog phone register in asterisk now thing is that i have one more SIP trunk with mediant 2000 [auodiocode-mp-124]-----[ * ]------[mediant 2000]-----E1 When i call from audiocode MP -124 phone i got this error -- Executing Dial("SIP/20-0889c4d8", "SIP/mediant/1")

Hi, This is my first experience with a mediant 1000 and an Asterisk Trixbox. the mediant has 12 FXOs and 12 FXSs, and I want to use it them all. I will have extensions connected to the FXS ports, and lines to the FXO. Can anyone guide me, please? regards, -- Guillermo Garron "Linux IS user friendly... It's just selective about who its friends are." (Using Ubuntu, Debian,

We're experiencing an issue where calls disconnect after 15 minutes. It seems to happen just after Asterisk sends an update mesage. RTP is being set up directly. Asterisk is only in the SIP dialog. Has anyone experienced this issue? 4 PRIs inbound, 4 PRIs outbound, asterisk provides switching. SIP/2.0 200 OK Via: SIP/2.0/UDP 38.XXX.XXX.XXX:5060;branch=z9hG4bK1c4b524f From:

Dear all anyone have idea about connect asterisk with mediant 2000 audiocode configuration ... anybody have configuration about it --------------------------------- Get your own web address. Have a HUGE year through Yahoo! Small Business. -------------- next part -------------- An HTML attachment was scrubbed... URL:

hello,all there is a AudioCodes Mediant 2000 out there. i want to realise ip to PSTN and PSTN to ip connection. after some configuration on AudioCodes Mediant 2000, PSTN to ip connecttion works. next ,i want to dial from asterisk to PSTN now. i have see the sample in the extensions.conf relevent to PSTN as follow: ; If you are freely delivering calls to the PSTN, list them here ; ;exten =>

Hello, i just made the reproducible watching: I send a Fax from asterisk (trunk) with spandsp (latest snapshot) via T.38 -> Audiocodes Mediant 2000 (FW 5.60.43.5) -> PSTN Fax With Internal timing Enabled, the Fax break after the first quarter from the first page is transfered. With Internal timing Disabled, the fax is transferred flawless. Both test with pthread timing module on a QEMU

Dear all I have setup of asterisk 1.2.14 and this is working fine. first i want to explain you my setup of asterisk on network i have connect my asterisk with mediant 2000 gateway and PRI terminated on mediant. [fax_machin]------[audio_code_fxs]-----[Asterisk]-------[mediant_2000]---PRI--<--< my fax machine connected with audiocode 24 fxs extention and which is

Greetings... We've been having some interoperability issues between Asterisk and an AudioCodes Mediant 2000, and, well, I gotta use the Mediant 2000 somewhere. So, I've been pondering using iptel.org's SIP server (SIP Express Router) as a "front end" for PSTN calls going out to the Mediant, while using Asterisk for everything else. Has anyone done something similar, or

Dear all I have FAX machine connected with audiocode SIP device i am trying to send fax and when negosiation going on and i start send fax button then my after half page it got stuck in fax machine so is there any codec problem i am useing ulaw/alaw is it fine or not anybody have idea about sending fax with SIP connected device --------------------------------- Ready

Hi i have buy a Audiocode Median 2000 VoIP Gateway and connect it on : 1 E1 30 channels 1 Lan Port Anyone use this equipements with asterisk ? because i am search a config sample for AudioCode and for Asterisk (i am new in VoIP). I want that all calls arrives on the AudioCode are sent to the asterisk by SIP (trunk ?) and all outgoing call from Asterisk are sent to the AudioCode. I

Hi, I have been using/working on asterisk for some time now and presently was trying to configure asterisk to work with digium cards. It worked fine with the fxo/fxs cards, but now i'm trying to get it working by interfacing it with mediant t1 port. no avail ....... anyone out there got it working, what particular configuration used on mediant (isdn signalling, framing, coding etc ??)

Is anyone on this list using and audiocodes FXO gateway? I have Asterisk(1.07 on OS X) setup and working fine, including SIP phones and IAX2 phones - I can make outbound calls just fine and receive inbound calls just fine. However, I can't seem to find the right series of DTMF settings on the AudioCodes to allow DTMF tones to be sent after an outbound call is connected(phone banking,

Dear All I want to integrate asterisk with mediant so anybody have configuration for this setup [asterisk]----------[mediant]------[avaya] this is my setup so what is the basic configuration for this setup --------------------------------- Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. -------------- next part -------------- An