Displaying 20 results from an estimated 120 matches similar to: "Got Anonymous from DID incoming call and can't re-send to another asterisk with new callerid"
2005 Jun 23
1
USB UPS Question...
Hello,
I have been trying to get a TrippLite Internet Office 750 UPS to talk to
my Linux PBX for a couple of evenings now and I'm getting nowhere... I
tried searching the list archives before posting here (I'm sure I'm not
the first one to try to get this going) but they seem to be offline...
The UPS is unfortunately USB based but I thought I'd give it a try
anyway. Here is
2011 Nov 30
1
Installing asterisk on a server vs appliance(e.g digium mypbx)
Hi,
I am looking into advising a client on the pro's and cons of using
Installing asterisk on a server vs appliance(e.g digium mypbx). the
appliance seems cheaper initially.
2009 Jan 10
1
Local channel Help required
Hi All,
I am using asterisk 1.4 branch on server.
Here is a my dialplan.
i have set the incoming route to incoming context, and then i have set dial
with local channel,
The call comes to my server and the call is routed to matched case, so my
phone 1001 ring for 30 seconds.
If i got the NOANSWER then the channel is not passing to next priority.
I need to pass that channel to the next priority of
2010 Mar 23
4
Safe_asterisk doesn't exists???
Hello my friends,
I'm very worry about a problem i'm having...my asterisk got freez some
times, every 5 or 6 days with NO trace in /var/log/asterisk/messages
What i want to know is if safe_asterisk has something to be with this?
This is what i have on my server:
[root at mypbx ~]# ps -A | grep asterisk
9118 ? 00:01:30 asterisk
[root at dreampbx ~]# ps aux | grep asterisk
root
2005 May 01
1
zaptel.conf multiple devices
Hi there my zaptel hardware is giving errors while loading but they seem to
load just fine. the lights wil work and my wctdm card is also workin and the
isdn works to
But when I stop asterisk I have to reload al cards again is this normal?
This is my zaptel.conf is there no way to group these because my te110p is
giving an error that it can't find channel 35 but 35 belongs to my wctdm.
2010 Mar 24
1
Aastra weirds IP 169.x.x.x
Hello my friends...
Currently we are using the following firmware versions on ours aastra 55i:
Firmware Information
Attribute Value
Firmware Version 2.1.0.2145
Firmware Release Code SIP
Boot Version 2.0.1.1055
Date/Time Jun 20 2007 06:20:29
Can we make a firmware upgrade to the latest one: 6755i (55i) SIP,
V2.5.3.18, January 2010 , English , ZIP , 2,849 KB
on the site:
2011 Mar 17
0
Asterisk not logging originating IP of a brute force attack
Why do attacks from the Internet get shown in the Asterisk logs with
myAsteriskServerIP instead of the attacker's IP?! Really useful for
blocking them, that is... Example:
[Mar 6 00:00:00] NOTICE[1926] chan_sip.c: Failed to authenticate user
5550000<sip:5550000 at myAsteriskServerIP>;tag=ab8537ae
(I replaced our IP address with myAsteriskServerIP. The attacks are not
coming from
2006 Apr 16
1
[Fwd: Re: voicemail email-from]
Ronald Wiplinger wrote:
> Steve Totaro wrote:
>> Ronald Wiplinger wrote:
>>> kevin ling wrote:
>>>> Hi,
>>>>
>>>> Check the vm_general.inc file
>>>>
>>>>
>>> Where should this file be?
>>>
>>>
>>> bye
>>>
>>> Ronald Wiplinger
>>>
>>>
>> You
2016 Aug 09
2
Asterisk 11.23.0 on CentOS6 : how to get ICE support ?
Hello
I'm trying for several days now to get ICE support for my Asterisk 11.23
on CentOS 6.
My call setup : sipml5_webRTC (nat) --> public Asterisk on 178.18.90.230
--> softphone Zoiper
(problem : no audio)
Reverse does not work either.
(problem : failed get local SDP)
I followed this guide :
https://wiki.asterisk.org/wiki/display/AST/WebRTC+tutorial+using+SIPML5
2016 Aug 11
2
Asterisk 11.23.0 on CentOS6 : how to get ICE support ?
Hello
Using Asterisk 12.8.2.
I now have the "via ICE" messages in the RTP debug (see below).
If you look in the SIP debug (see below), you also now see the
"ice-ufrag" and "ice-pwd" in the 200 OK SIP-message from Asterisk to the
webRTC client.
But still no audio ! None at all ! In both directions.
You can see in the SIP debug that the IP-address in de
2016 Aug 10
2
Asterisk 11.23.0 on CentOS6 : how to get ICE support ?
Hello
thank you for your answer.
I don't understand how there are many tutorials and examples on the web
where every time the outcome is a working setup. Very strange I feel now
after my personal experience with Asterisk 11 and webRTC.
You also say Asterisk 13. How about Asterisk 12 then ??
Kind regards.
On 10-08-16 21:53, Matt Fredrickson wrote:
> I don't see an ice-ufrag or
2010 Mar 18
6
Asterisk DIES with no trace. PLEASE
Thanks Zeeshan,
SAngoma told me that the asterisk problem is unrelated to wanpipe drivers,
they told me to reinstall asterisk again
But, i still having doubts about the problem :(
Thanks in advance
>
> Message: 10
> Date: Thu, 18 Mar 2010 00:21:06 -0400
> From: Zeeshan Zakaria <zishanov at gmail.com>
> Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE
>
2003 Jun 14
0
Asterisk confused when interface has multiple addresses?
I have asterisk configured on a machine connected to Internet by a cable
modem with a public ip. The same network card has a private lan address
which I'm trying to use to play with an asterisk configuration with X-lite
or an softip phone.
sip.conf has bindaddr=192.168.0.1 [the private address of the LAN] to
which the client [192.168.0.2] is connected.
Doing a tcpdump on the register
2003 Jul 11
0
Sip: problem authenticating (with Cisco VoIP IOS 12.x) [long]
Hello All,
I've been trying for some time to get Asterisk to register with a remote
SIP gateway. I?ve recently managed to configure an SJ Phone to work with
W2000 so know the configuration parameters work correctly.
Asterisk doesn't authenticate properly and I notice that the
authentication request appears different to SJPhone's. Do any tools
exist to enable me to check these
2003 Jun 15
2
a few questions about sip implementation
I'm looking at RFC 3261, I think the latest SIP standard and have a few
questions about the * sip implementation:
1. 8.2.6.1 Sending a Provisional Response says that UASs SHOULD NOT issue
a provisional response to non-INVITE requests.
2007 Feb 25
2
Dialling ZAP channel from analogue
Hi,
Asterisk Version : 1.2.15
Card : TDM11B (1 x FXO , 1 x FXS)
I have internal dialling working okay SIP->ZAP (analogue phone) and ZAP (analogue phone) -> SIP.
The problem comes when I try and make a outbound call.
Here is my extensions.conf :-
Code:
[incoming]
exten => s,1,GoToIfTime(17:00-09:00\mon-fri\*\*?outofhours|s,1)
exten => s,2,GoToIfTime(*\sat-sun\*\*?outofhours|s,1)
2003 Jun 15
1
SIP REGISTER behavior change: specific domains possible in REGISTER
Mark has fixed the REGISTER issues to be more RFC compliant. I've
created a new thread so that those of you who got bored with the old
thread might read this new one. The feature that has just been added
was added a while ago, but now it actually seems to _work_. :-)
If you have a SIP server to which you are trying to REGISTER, and
they demand valid domain (the part after the
2011 Jun 21
5
omitting columns from a data frame
Dear R People:
I have a data frame, xm1, which has 12 rows and 4 columns.
If I put is xm1[,-4], I get all rows, and columns 1 - 3, which is as
it should be.
Now, is there a way to use the names of the columns to omit them, please?
Thanks so much in advance!
Sincerely,
Erin
--
Erin Hodgess
Associate Professor
Department of Computer and Mathematical Sciences
University of Houston - Downtown
2002 Apr 04
2
summary on predict with arima0
Here is the summary on predict when
using an arima0 object:
The arima0 object must be based on a time series vector.
That is;
x <- ts(xm1, frequency=12, start=c(1975,1))
x.ar <- arima0(x,order=c(1,1,1))
predict(x.ar,n.ahead=3)
Thanks so much to Prof. Brian Ripley and David Brahm and other!
Sincerely,
Erin Hodgess
2001 May 23
1
Passing a string variable to Surv
Hi,
I am trying to write a function to automate multiple graph
generation. My data looks like:
Table of numeric values with the following headers:
timeM1 statusM1 xM1 timeM2 statusM2 xM2 timeM3 statusM3 xM3
1
2
3
4
5
6
Where M1,M2, M3 hve no similarity except they have a max string length
of 7. Examples are mcw0045, adl0003, lei0101.
Now, what I want to do is
Function(M1, M2,