Displaying 20 results from an estimated 600 matches similar to: "Digium fax - sending fax call file vs manager originate"
2009 May 15
1
Fax t38 capability
Dears I installed digium fax and followed the instruction at
http://downloads.digium.com/pub/telephony/fax/README,And as you can see
above that t38 is loaded
I am using a call file to send fax1.tif file as fax to the gateway named
add
The problem that Addpac send always Receive 488 Not acceptable here,and
lkindly find my debug attached
Please advice.
Thanks I Advance
shark*CLI>
2014 Feb 03
1
Incoming Fax Issue with Asterisk 11.7 and Digium Fax
Hi, im using a Asterisk Server which is not behind NAT.
First i had problems with the fax detection. But this is now solved
after adding a wait(2) at the correct place. But i'm still unable to
receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too
short after the Fax session has started.
My sip.conf includes
[general]
allowguest=no
alwaysauthreject=yes
sendrpid=rpid
2009 Jul 16
1
Sending faxes with T.38 problem. Fax for Asterisk (no SpanDSP) - 1.6.1.1
I am testing Fax for Asterisk. But, I meet a problem. I try to Send a Fax (.tiff) from the first
asterisk (Asterisk1) to the second asterisk (Asterisk2). Asterisk1 initiates an INVITE with audio G.711. Asterisk2
accepts this INVITE. Immediately, Asterisk2 sends an re-INVITE with T.38 to Asterisk1. But, Asterisk1 responds with
"488 not acceptable here". I double check t38pt_udptl = yes in
2010 Jan 04
1
Free FaxForAsterisk ReceiveFAX not working
Hello users,
Recently i have installed the free version of FaxForAsterisk and trying to
work with it by sending a fax
on T38.
My version information is as follows
i)Asterisk 1.6.0.20
ii)res_fax-1.6.0.14_1.1.6-x86_32
iii)res_fax_digium-1.6.0.14_1.1.6-i686_32
sip.conf
[general]
t38pt_udptl=yes
extensions.conf
[default]
exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call)
exten =>
2014 Dec 23
1
ReceiveFax for multiple page (asterisk 13.0.1)
Hi all,
I have problem for receiving fax from multiple page fax that sent from fax
machine (analog).
The error is : WARNING T.30 Page did not end cleanly
This is my dialplan
[inboundfax]
exten => s,1,NoOp(**** FAX RECEIVED from ${CALLERID(num)}
${STRFTIME(${EPOCH},,%c)} ****)
exten => s,n,Set(FAXOPT(ecm)=yes)
exten =>
2010 Jul 12
1
Fax for Asterisk, capable of receiving from website but not from fax machine !!
Hi Guys,
i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1)
and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue
i'm having is that i'm able to receive faxes from a website (that offer this
service) but not able to receive from a regular fax machine (that is working
perfect).
[fax-rx]
exten => receive,1,NoOp(**** FAX RECEIVE ****) exten
2011 Jun 19
3
Problem with ReceiveFAX app from FFA
Hi all,
I am running to the following problem, when using the below dialplan to
receive fax, everything works perfect till this line
exten => receive,n,ReceiveFAX(${FAXFILE}):
and then the following line cannot be executed, it's like asterisk can't go
back to dialplan and continue, the good news is when i check what is
received in my fax folder i find that the file is a valid one (not
2018 May 21
5
Looking for better fax handling
I am having troubles with sending faxes. I hope someone can help me
work out a better method.
Basically we have a special address that our users can send to. It
winds up on our Asterisk server which runs a Python script that parses
the message for attachments and the phone number from the recipient
address. The attachments are converted to TIFF and stored in a folder
with various information
2009 Dec 23
4
fax problem
Hello,
I need to send a tiff via fax with my asterisk 1.6.1.0.
I tried in the dialplan
[default]
exten => _X.,1,SendFax(/root/test.tiff)
but I have:
salledeconf1*CLI> console dial 111 at default
[Dec 23 16:24:22] WARNING[31739]: chan_oss.c:492 setformat: Unable to
re-open DSP device /dev/dsp: No such file or directory
-- Executing [111 at default:1]
2011 Jun 30
0
SendFax: not setting the fax header
Hello,
after I solved my problem with the fax processing after receiving,
I got another problem while sending a fax: the header is not set properly.
I use a PHP_Script to upload a PDF file and to generate a call file.
A bash script is looking for existent call files in the web directory
and moves
them the asterisk's outgoing directory.
Ok, my call file looks like this:
======
$cf_commands
2016 Dec 18
2
Asterisk Fax Receive - how to get the remoteheader?
Hi,
thanks for your answer. Unfortunately this is, what I already know. I
was wondering, why it is possible to set ID and Header for an outgoing
fax (which will then in turn
be inserted via asterisk on top of the transferred "image") , while it
seems to not be possible to get the Header from a received fax (only the
id), although it is present in the faxdocument.
The ID is also
2011 Jan 24
6
ReceiveFAX issue.
I am testing out inbound faxing using res_fax and res_fax_spandsp.so
My system answers the call but then sets there on the ReseiveFax line then
comes back with an error that it exceeded the maximum retries.
How would I go about debugging this? Below is my very simple dialplan code
I am using, and the fax show version gives the following as well.
FAX For Asterisk Components:
2016 Dec 17
2
Asterisk Fax Receive - how to get the remoteheader?
Hi,
I am using asterisk 11.8 in combination with spandsp to send and receive
T38 Faxes. All works fine, but I do not know
how to get the remoteheader from the fax I receive.
When I send a fax, there are Faxopts to set the localstationid and the
headerinfo, but for receiving, there seems to only exist
the Faxopts remotestationid
but for sure on any fax I receive there is a remoteheaderinfo
2016 Nov 15
2
iaxmodem errors.
2015 Jun 25
0
asterisk email to fax
On Wed, Jun 24, 2015 at 08:15:06AM +0200, tux john wrote:
> i would like to add email to fax functionality to the system. could someone
> point me to the right direction to see how please?
I don't have a general solution, since I haven't needed to send faxes
recently. But I did set up my dialplan so that I could test that it
works.
I used this:
----
;; For outgoing faxes
2011 Feb 21
1
Dialplan execution stops on app call even with TryExec (Am I missing something simple?)
We're having an issue where we call ReceiveFax in a context that
includes a hangup extension and half the time dialplan execution doesn't
continue after the fax is received successfully. Am I missing something
simple here? Below is a sample call where this happened:
The last log line for this channel/call is:
[Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel
2014 Aug 11
2
Sending and receiving fax with Digium FFA
Hello.
I've been trying to setup Free Fax for Asterisk on a Debian machine with
Asterisk 1.8. I have managed to register and installed the Digium
modules. Sending and receiving through it have resulted in failure. The
output of fax show capabilities is:
Registered FAX Technology Modules:
Type : DIGIUM
Description : Digium FAX Driver
Capabilities : SEND
2015 Oct 13
2
How to diable fax header (OR: what module could add that header?)
Dear colleagues,
after hundreds of hours I finally managed to figure out how to send faxes from a T.38 capable endpoint reliably via Asterisk / PJSIP. My setup is as follows:
A T.38 capable endpoint sends the fax to Asterisk which passes the fax to a T.38 capable trunk which then sends the fax to its final destination. This works great, but I have left a little problem which I couldn't solve
2009 Sep 27
1
digium fax: failed to queue document
In my quest to actually send a fax, I'm now stuck trying to send the
confirm.
First I send the fax:
-- Executing [send at outbound-fax:2] System("Console/dsp", "env echo
-e "Channel:DAHDI/g0/12036378447\\nContext:fax-tx\\nExtension:
s\\nPriority: 1\\n" >/var/spool/asterisk/outgoing/call-1254012878.0") in
new stack
-- Auto fallthrough, channel
2015 Jun 18
0
Fax Header
Hi,
I am trying to add header to fax while sending fax. I can add some
information to header but some information added automatically (date and
page count). I want to format this information.
Header => Date | ${LOCALHEADERINFO} | ${FAXOPT(localstationid)} | Page Count
I can set LOCALHEADERINFO and FAXOPT(localstationid) but i cant find any
variable for "Page Count" and