similar to: Xorcom problem after update from zaptel to dahdi-2.2.1

Hi, Xorcom astribanks get initialized straight on when using Ubuntu 11.10 packages but I am having a hard time to get the same result running in a qemu/libvirt image. The first difficulty is that astribanks devices get different usb device ids during their initialisation process, requiring hot plug support. I have figured out how to solve this issue using the technique described in this post :

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

The Asterisk Development Team has announced the releases of: DAHDI-Linux 2.6.1 DAHDI-Linux 2.5.1 DAHDI-Tools 2.6.1 DAHDI-Tools 2.5.1 DAHDI-Linux-Complete 2.6.1+2.6.1 DAHDI-Linux-Complete 2.5.1+2.5.1 These releases are available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools

Hello, I'm writing here hoping to have a hint from Asterisk/Digium packager maintainer, Jason Parker (of course that any other's opinion is welcomed). We have installed an asterisk machine using Asterisk and Digium repos. Unfortunately we have found that an Astribank could not be connected due to the lack of the firmware files May 18 14:19:22 tenora1 kernel: usb 1-6: new high speed USB

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0 DAHDI-Tools-v2.11.0 dahdi-linux-complete-2.11.0+2.11.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release adds automake

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0 DAHDI-Tools-v2.11.0 dahdi-linux-complete-2.11.0+2.11.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release adds automake

Hi, I have upgraded an Asterisk installation with a Xorcom BRI Astribank that was working under Ubuntu 8.04 to Ubuntu 9.10 and the device is no longer initialized. When I reload the udev rules, I see that the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger

Hi, all My Asterisk uses a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

The Asterisk Development Team is pleased to announce the first release of DAHDI-Linux 2.6.0 and DAHDI-Tools 2.6.0. 2.6.0 is a feature release which: - Adds support for the TE820 8-span card to the wct4xxp driver. - Decrease load time of analog cards supported by the wctdm24xxp driver. - Adds sysfs object model to facilitate persistent span numbering and early loading of modules

The Asterisk Development Team is pleased to announce the first release of DAHDI-Linux 2.6.0 and DAHDI-Tools 2.6.0. 2.6.0 is a feature release which: - Adds support for the TE820 8-span card to the wct4xxp driver. - Decrease load time of analog cards supported by the wctdm24xxp driver. - Adds sysfs object model to facilitate persistent span numbering and early loading of modules

We have recently install an asterisk solution with about 60 physical extensions. While the system is running it runs reasonably well (Still have a few teething problems) but twice now they have experienced a degradation in voice quality and dropped calls and then finally asterisk completely crashes out. Restarting asterisk will work for a little while and it will crash again, each time less time

Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI> dahdi show channels Chan Extension Context

I am running Asterisk on Ubuntu 2.6.32-25-server with asterisk 1.6.2.5-0ubuntu1 and dahdi 2.2.1-0ubuntu2. The machine has a passive HCF-based PCI ISDN card and an Astribank 8 attached. The ISDN card works fine. root at servaction:~# lsusb Bus 001 Device 002: ID 04b4:8613 Cypress Semiconductor Corp. CY7C68013 EZ-USB FX2 USB 2.0 Development Kit root at servaction:/usr/share/dahdi# ./xpp_fxloader

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release