similar to: dialing 0 in directory()

I've got hints setup for my MeetMe conferences like so: exten => _60X,hint,MeetMe:${EXTEN} and they show up in "core show hints" like so 600 at dialtone : MeetMe:600 State:Unavailable Watchers 1 _60X at dialtone : MeetMe:${EXTEN} State:Unavailable Watchers 0 I'm wondering why they're Unavailable instead of

Saw an ad in the latest Linux Journal for Sangoma's FXO/FXS analog cards. it was part of an ad for a reseller. I can't find anything on the resellers site or Sangoma's site either. Did the ad jump the gun or someting? Is this for real? Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC paul@dugas.cc phone: 404-932-1355 522 Black Canyon Park

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

Been using a few different FXO interfaces (X100P, Voicetronix, and SPA-3000) at a couple sites and they've all run into nasty issues at times. I'm looking at moving one of my offices and am in the market for a solution for connecting 4 FXOs. I got excited about recent offerings from Digium and Sangoma in the way of new cards but I hear they're causing troubles for more than a few.

Got a wierd one that's reminding me of a problem mentioned in an earlier post but for the life of me, I can't find it. So... Inbound calls via a Voicetronix interface on my Asterisk box are being properly detected and routed to my dialplan as expected. It's a simple plan right now that rings a few internal Voicetronix and SIP stations. When the inbound line rings, it's ringing

This is a wierd one. Can't figure it out. I have an SPA-3000 at the house handling my incoming line. It's setup to direct the incoming call to asterisk. Works great 99% of the time. A few times a day, I'm getting calls that ring once internally and are then hungup. I managed to get a detailed log [1] of what's happening today and it looks to me that the SPA is acting wierd.

Hi all, Anyone got any VoIP traffic shaping rules for m0n0wall that they could let me look at please? Thanks -- Mark, G7LTT/KC2ENI Randolph, NJ http://www.g7ltt.com

Running * CVS with a SPA-841 (0.9.5) and can't seem to get the message waiting light to come on automatically. There is a control in the web interface to turn it on and off (seems rather curious to me but whatever). Has anybody got an idea as to where I may be going awry? TIA, Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com 1711 Indian

While setting my first couple IP phones, I set their voicemail buttons to an extension that runs VoicemailMain. exten => 8500,1,Wait(1) ; voicemail exten => 8500,2,VoicemailMain ; exten => 8500,3,Hangup ; I would like to be able to pass the mailbox number allowing each phone to go in directly but I'd rather tno have

I've got my 1.2.x Asterisk server registering with a SIP provider using their servers DNS entry, not their IP address. My server is behind a NAT. The setup works like a champ for weeks then I get a call reporting inbound calls are failing. When my server isn't registered, inbound callers get a "disconnected" message; very bad. When it happens, I've found that the IP

One of the suggestions I got for dealing with my analog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically

Hello, How good is :SPA 841 form SIPURA. Thanks Varun

New to asterisk so please be gentle. I'm guessing I'm among a number of recent additions to the list after the article in Linux Mag. I gotta say I'm *very* intersted in the project and will be doing lots of reading shortly. A couble quick questions first... How suitable is Asterisk for use as an IVR providing callers with textual data out of a database? Can it be combined easily

> Just wanted to let you know you were just left a 2236:45 long > message (number 1) in mailbox 1000 from an unknown caller, on Monday, > February 21, 2005 at 05:38:14 AM so you might want to check it when you > get a chance. Thanks! > > --Asterisk Hmmm... Call came in either via a SPA-3000 or an X100P Zaptel FXO interface. Got 2200 minutes of beep-beep-beep-...; the caller

Am I doing something wrong here? GOt a SPC-841 the other day and have it registering properly. Can place and recive calls as expected but when on the phone, a second call is immediately dumped to "busy" voicemail. Does this thing not support call-waiting? Or, have I just got my configs wrong? Paul -- Paul A. Dugas Dugas Enterprises, LLC paul@dugasenterprises.com

Hi all, Happy Wednesday! Got a 7940G off eBay to tinker with and, per the wiki, contacted Cisco about a service contract. Being just little ol' me, they won't deal directly and blew me off (I hate dealing with Cisco, Nortel, etc as a small-business person...) Again per the wiki, I hit CDW.com and found CON-SNT-CP7960 for $9.14. Looking for support for the 7940 (not 7960), I just

This is probably going to sound really silly and I must be confused about it. Maybe someone can set me straight. I've been tinkering for a while with * and a number of different FXO/FXS cards, SIP phones, and ATAs trying to get a feel for what works and what doesn't. In the SIP phone group, I have a Cisco 7940G, a Polycom 500, and now an SPA-841. Each of these allow me to configure at

I've been struggling with a test * install for a couple months now in a small office and am just about ready to give up on it. It's not that the system itself is a problem. I've got everything (attendant, voicemail, FXS extensions, Cisco and Polycom hard-IP phones, and 2 VOIP carriers) working except for the frigging analog FXO interfaces. These things are driving me completely mad.

I have a SPA-3000 that is failing to hanging up pretty often; almost every day now. The weird thing is that an almost identically configured (same FW, different HW rev) second unit right next to it isn't having the same problem. Swap the lines and the problem stays with the unit. I've been going round and round with Sipura and their latest message told me to use a procedure detailed in

Wondering if someone (Steve?) can clarify something form me. I think the recent "soho fax solution?" thread has mixed things up for me. - Is it possible to get reliable fax reception using a Zaptel FXO interface connected to a standard POTS line and a fax machine connected to station interface? - Is it possible to reliably send outboud faxes in the reverse direction?