similar to: custom ip phone interface

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

i have posted this question couple of times and never really got any hits i wasn't able to provide any debug info Connected to Asterisk 1.6.0.21 currently running on phoneserver (pid = 3309) Verbosity is at least 4 == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 == Using SIP VRTP TOS bits 136 == Using SIP VRTP CoS mark 6 == Extension Changed 117[ext-local] new

I'm in the process of converting our current hybrid key system to Asterisk and Aastra 57i phones. One of the features that seems to be a show stopper for almost everyone in the office is the inability to see who is on the phone. Can someone point in the right direction to setup an XML app on the phone so they can press a soft-button and get a list of extensions and their statuses? I know I can

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1:

Hi, (please note the mailing list is libguestfs@redhat.com, and -owner@ is the address of the mailing list administrators.) On Wednesday, 11 January 2017 13:02:29 CET Aditya Suripeddi wrote: > I want to avail the virt-cusomize , virt-sysprep and other > commands for configuring of my vm instances on my ubuntu14.04 machine . > Installing the libguestfs-1.24.9 has generated 2

I just noticed the Aastra 57i do something that I haven't seen before. I called from one phone (phone 1) to the 57i. I answered it. Then, I pressed Transfer and dialed the extension for the third phone (in this case a Cisco 7960 in Sip). I did not answer the Cisco, but noticed the caller ID was showing the Aastra (as expected). I hung up the Aastra to complete the transfer and noticed the

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

I need to buy some new phones for our own offices. I've used only Polycom phones until now, but I'd like to broaden my experience. I'm trying to decide which phones to experiment with. I have these options: - A combination of Polycom, Aastra and Snom - Just Polycom One the one hand, I'd like to keep things uniform, since it greatly simplifies provisioning. On the other hand, I

I have a 536i expansion module attached to a 57i-CT. The BLF lights on the 536i will light up and work fine for a while... however after a bit they seem to loose their ability to see if someone is on a phone. They still work to dial, if I try to dial, however, they don't light up when someone makes a call, or if their phone rings. If I reboot the phone, the lights start working again

Hi, I'm using an Aastra 57i together with Asterisk 1.4.13. The 57i is configured for call pickup as recommended by Aastra. When the LED flashes, I press the corresponding button and the display tells me "Call not possible". In the CLI is see the follwoing output. Why isn't the call transfered to user2 and what does "No target channel found for 31 mean"? User2 can

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

Hi, I would like to test the following COLP use case : Alice and Bob are both using a SIP phone registered on a Asterisk 10 server. Alice dials Bob's extension. While Bob's phone is ringing, Asterisk updates Alice phone screen with Bob's name, so that at a glance, Alice can check she dialed the correct number. Before diving into Asterisk documentation, I would be happy to be

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

I have Asterisk 1.4 tied via SIP to a Cisco Callmanager 6.1 system. Calls between the systems (ie. extension to extension) work perfectly. However when I attempt to make an outside call from an Asterisk extension through Call Manager to the outside world, it connects but only for a few seconds, and on the Asterisk console I get: Got SIP response 503 "Service Unavailable" back from (ip

We often find ourselves reading through all sorts of contests on the Internet that never seem to echo our own personal skill set or interests. Perhaps you've even fantasized about a type of contest with the types of prizes and goodies that YOU'D actually enjoy. Maybe you've wished there were something along the lines of a asterisk phone system diagram contest? With prizes ranging from

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4