similar to: Asterisk 1.6.1.6 Crash when accessing Directory

Hello, I've found a little documentation on voip-info and on the asterisk- users list, although I was hoping for an example of a tried-and-true failover setup between PRI and SIP. We are an outgoing call center that uses asterisk 1.4 connected to 2 PRIs from the local telephone company in one group (g1) and a SIP trunk from bandwidth.com. The PRIs are the primary outgoing service,

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Hello! I have been struggling with Asterisk 1.6 and DAHDI for the past few weeks. We are an outgoing call center with 30 internal analog phones hooked up to 2 Rhino CB24 channel banks. The banks are connected to a Rhino R4T1 card in a Dell 2950 server with 8 gigs of RAM. The 2 other ports on the R4T1 go to our 2 PRIs. In this configuration, we have trouble maintaining stability. It may be fine

Hello, We use MS Access 2000 (I know, we're migrating away from it) as an application to automatically dial phone numbers. The old phone system we have allowed the call representative using the application to take their phone off hook, push a button in the app, and the app would send the phone number to the phone system and dial the number. We are moving to Asterisk for our main phone

Hello, I have a strange problem with one of my Zap channels. A user told me that he was in a voicemail system during a call, hit the Flash button, and the call hung up. Now we get no dialtone on the phone hooked up to the channel. Here's the status of the channel: jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7" Parsing /etc/asterisk/extconfig.conf Channel: 7 File

Hello, I'm working with our SIP provider to nail down some call quality issues we're having, and they've asked me to provide SIP debug log files from our asterisk server. Is there a way to make asterisk 1.4 output only SIP debugging to a specific log file? Or it is best just to use tcpdump? Thank you! -- Jason Martin Metrix Matrix, Inc. 785 Elmgrove Road, Building 1, Rochester, NY

Hello! I am migrating an old Red Hat Samba 3.0.9 server to a new Debian Etch Samba 3.0.23d with an OpenLDAP backend. I've got almost everything working with the new server except the roaming profiles. When a user logs off, Windows complains that the permissions are not correct and the profile can't be saved. I would LOVE to get rid of roaming profiles but that isn't an option

Hello, We have finally upgraded to Asterisk 1.4, however we've run into two issues that weren't occurring before the upgrade. Issue #1: We're an outgoing call center and need to record all calls. We use the uniqueid field in the CDR to match with the recording, which we labeled with {UNIQUEID} in MixMonitor. For some reason, the uniqueid is not correct in the CDR. Here is the

Hello, I've been looking at some SIP packet dumps captured with tcpdump on the PBX itself, and analyzed with Wireshark 0.99.4. I'm noticing something strange, at least to me. All of the SIP packets going out from our Asterisk PBX to either of our 2 VoIP providers are consistently 50% out of order. In addition, if I use Wireshark's voip call player, the outgoing side of the call

Hello, We've purchased a 2nd Wildcard TDM2400P for our asterisk server. I've looked around but I can't find documentation on how to properly setup 2 or more telephony boards in asterisk. In particular, I want to ensure that the boards are assigned the same device channels on boot (for example, if you have two NICs in a Linux box and you want to make sure one card is always eth0

Hello, I'm using Asterisk 1.4.14, and I've noticed that the emails that are sent out when a user gets a voicemail don't have the timezone set in the header, so they're appearing in the user's email clients at the wrong time. Has anyone else seen this? I didn't find any bug reports or other info with Google. -- Jason Martin Metrix Matrix, Inc. 785 Elmgrove Road,

Hi I am new to R so I apologize if this is trivial. I am trying to predict the resistance or susceptibility of my sequences to a certain drug with a randomForest function from a file with amino acids on each of the positions in the protein. I ran the following: > library(randomForest) > > path <- "C:\\..." > path2 <- "..." > name <-

I''m trying to connect to two ISPs the connections are as follows: Eth0 IP: 192.168.1.1 Mask: 255.255.255.0 Eth1 IP: 216.167.217.241 Mask: 255.255.255.0 Eth2 IP: 216.167.208.40 Mask: 255.255.255.0 Here are the commands to set things up: #Load modules insmod /lib/modules/2.6.19.2- pyramid.metrix.net/kernel/net/ipv4/multipath_drr.ko insmod /lib/modules/2.6.19.2-

I''m trying to connect to two ISPs the connections are as follows: Eth0 IP: 192.168.1.1 Mask: 255.255.255.0 Eth1 IP: 216.167.217.241 Mask: 255.255.255.0 Eth2 IP: 216.167.208.40 Mask: 255.255.255.0 Here are the commands to set things up: #Load modules insmod /lib/modules/2.6.19.2- pyramid.metrix.net/kernel/net/ipv4/multipath_drr.ko insmod

Hi everyone, I want to create my own distance measure, other than 'euclidean' or 'manhatan', to use in cluster pckgs. To do this I think that I need to change dist(), in mva pckg, or daisy(), in cluster pckg. (or is there a cleaver way ?) But this functions are in fact things like: .Fortran( "daisy", ... ) or .C("dist",...). I tried unsuccessfully to find

Andrew: Thanks for the heads up. As always, the support you guys give to an open source product amazes me. We worked with Jeremy & John Terpstra a few years ago when there was a problem with how AutoCAD was creating lock files (AutoCAD R14 running against SAMBA 1.9.something; it ended up being a timing issue that AutoDesk & Microsoft resolved, as well as samba 2.0 provided an

Hi, I write below code for simulation for weibull- estimating parameters by weibullMLE function, Although I define metrix for the variables still I got this message: number of items to replace is not a multiple of replacement length Any suggestion > est=matrix (NA, 2,2) > se=matrix (NA, 2,2) > for ( p in 1:2) { + sampleSize <- 20 + shape.true <- 1.82 + scale.true <- 987 +

I'm using a Asterisk 1.6.1.6 with dahdi. We need to redirect phone calls to a certain number when there is nobody. So I read about call reflection but the call reflection applications on bristuff are not for 1.6.1.6. Are there any other applications or patches that provides call reflection for Asterisk 1.6.1.6?? Greetz TM

Is there an LSPCI comboot module that someone has written? Or a linux style boot disk that has: a KERNEL b LSPCI c very small size d quick boot time I am currently having to get through a 5 - 7 minute boot cycle with a fedora setup just to get the lspci output. Heeeeeeeeeeeeeeelp Authenticlick, Inc. 5757

[I am really sorry if it is double posted, I doubt me previous post could not reach forum due to some problem with net] Suppose I have a matrix : a = matrix(1:9, 3) >From this matrix, I construct 9 additional matrices : i = 1:9 bi = a * i Now combining all those 9 new matrices, I construct a final metrix as : c = b1 b4 b7 b2 b5 b8 b3 b6 b8 I want to automate this procedure for any