Displaying 20 results from an estimated 400 matches similar to: "PRI worked fine for months, nowit stopps working after 2-3 hours"
2008 Nov 21
2
hint priority with 50 channels
Hi,
I noticed that my hint priority stops working when I add to many
extensions/channels. It looks like everything exceeding 80 characters is
discarded.
By stop working I mean the status is and stays "Unavailable".
This works
exten => *1,hint,SIP/loicvoip1_1&IAX2/loicvoip1_1&SIP/loicvoip1_1_a1
This does not work:
exten =>
2008 Jul 16
5
Digium PRI and Echo cancellation
Hello,
I would like to double check what Echo Cancellation my Digium Card uses.
I thought I bought the little more expensive card that integrates
EchoCancellation. How can I check?
root at sn1:~# zaptel_hardware
pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121
root at sn1:~# ztcfg -v
Zaptel Version: SVN-branch-1.4-r4309
Echo Canceller: MG2
Is MG2 the correct one that I am supposed
2008 Dec 22
1
Install app_rxfax and app_txfax in 1.4with Lenny
JFYI - I run (successfully) agx-addons with 1.4.22 and Etch.
Make sure you have the right version of SpanDSP installed (as well as the tiff libraries).
-->> -----Original Message-----
-->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
-->> bounces at lists.digium.com] On Behalf Of Loic Didelot
-->> Sent: 19 December 2008 20:33
2009 Jul 21
1
externalIVR() and how to do actions
Hello,
I played with the externalIVR application. So far I am able to read
digits and play sound files. But how can I leave the application and
continue in the dialplan so that I can execute other actions like going
to voicemail, or ringing users etc....
Best regards,
Lo?c.
--
Lo?c DIDELOT
MIXvoip S.a.
Tel: +352 20 3333 20
Fax: +352 20 3333 90
ldidelot at mixvoip.com
http://www.mixvoip.com
2009 Sep 22
5
New Xorcom FXS USB Bank is not loading firmware
Hi,
I just got a Xorcom Astribank with 8 FXS but it does not work. So I
tried resetting and loading the firmware. But loading just times out.
/usr/share/zaptel/xpp_fxloader usb
--------- FIRMWARE LOADING: (usb) [1 devices]
'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex
into /dev/bus/usb/002/003
2010 Mar 25
2
Attended transfer and callerID updates forSiemens Openstage phones
Hello,
I am testing the Openstage phones from Siemens but I can not find a
solution on how to update the caller-id after a successful attended
transfer. Of course, I mean an attended transfer by using the phones
functionality, not something defined in asterisks features.conf.
Any idea on how to achieve this, or any technical document from Siemens
on on how this is support to work would help.
2008 Dec 22
2
Install app_rxfax and app_txfax in 1.4withLenny
...described in the README file ;).
SpanDSP - 0.0.4 pre 16
LibTiff - >= 3.8 but <4.0
I had to trawl around for the right SpanDSP - but I can e-mail a copy to whomever wants one (drop me a personal e-mail and I'll attach it by return)
HTH
Andy
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
2007 Jul 12
0
No subject
, address 2
Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x=
usb_listen: usb_submit_urb failed: -19
Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D=
isconnecting
Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed =
to XBUS-00/XPD-01
Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed =
to
2008 Dec 30
5
Xorcom BRI state NOTOPEN
Hello,
I recently got a problem I have never seen during my previous
installations.
I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux
and asterisk 1.4.22. Everything works fine but after some time zap
channels disappear in asterisk.
root at pbx1:~# cat /proc/zaptel/*
Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN
1 XPP_BRI_TE/00/00/0 Clear
2010 Apr 30
1
HDLC Receiver overrun on Wildcard TE410P
Hello
I've got small PBX (30 simultaneous connections) based on asterisk
(1.6.2.6), which uses Stargate 2N ISDN to GSM gate.
It runs ok for day or two, but then I get:
dahdi: HDLC Receiver overrun on channel TE4/0/1/16 (master=TE4/0/1/16)
in my kernel logs, in asterisk i get:
pri show spans
PRI span 1/0: Provisioned, Down, Active
PRI span 3/0: Provisioned, In Alarm, Down, Active
(span 3
2009 Jul 20
0
No subject
...SNIP...
cat /proc/interrupts=20
CPU0 CPU1 =20
0: 83 0 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
3: 100887 0 IO-APIC-edge serial
7: 0 0 IO-APIC-edge parport0
8: 3 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-fasteoi acpi
16:
2009 Nov 23
0
Asterisk 1.4 and kernel panic and IRQ interrupts
Hi,
I'm having trouble with one machine that kernel panics with Asterisk 1.4.
The motherboard is an Asus P5W Deluxe.
I reported the kernel panic here:
http://lists.digium.com/pipermail/asterisk-users/2009-November/241006.html
I'm now trying to understand if the problem can be an IRQ issue or not.
I disabled APIC in the BIOS because I thought that maybe it could be buggy (not sure
2008 Mar 30
1
Stange eth-device
Anyone else seen this eth-device and what brings it up?
[root at oh1mrr etc]# ifconfig
__tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0
TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX
2015 Mar 28
2
Why is irqbalance not balancing?
I am running irqbalance with default configuration on an Atom 330 machine. This CPU has 2 physical cores + 2 SMT (aka Hyperthreading) cores.
As shown below the interrupt for the eth0 device is always on CPUs 0 and 1, with CPUs 2 and 3 left idle. But why?
Maybe irqbalance prefers physical cores? My understanding, though, is that the even-numbered CPUs are the physical cores, with the
2007 Jul 06
0
eth0 does not exist when booting xen kernel
Hi xen-users,
I install xen, on gentoo linux. Install was ok, but i have an
issue that i can''t solve. When booting in xen-linux, whereis no eth0
interface. When i boot non-xen kernel all is ok, eth0 is present.
I use 2.6.18-xen kernel version.
lspci show me:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation
2014 Jun 01
1
wct4xxp Excessive Interrupts Resulting in Unusable System or Card
Hello all-
I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable.
I have confirmed that the card is good by placing it
2014 May 12
1
Terrible dahdi_test results
Hello, I am trying to get a Wildcard TE110P to work in a relatively
modern HP Proliant DL385p Gen8 server. Being a potent 12 core Opteron
server I expected no problems.
Much to my dismay the dahdi_test results are constantly terrible:
# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
89.101% 89.195% 89.142% 88.957% 88.953% 89.115% 89.089% 89.134%
89.066% 89.021% 88.933% 89.044%
2008 Mar 28
4
[Bug 15233] New: geforce 7800gs and AGP 3.0 DBI function
http://bugs.freedesktop.org/show_bug.cgi?id=15233
Summary: geforce 7800gs and AGP 3.0 DBI function
Product: xorg
Version: unspecified
Platform: Other
OS/Version: All
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: nouveau at lists.freedesktop.org
2013 May 21
1
How to load balance interrupts of a NIC on the PCI-MSI-edge driver in CentOS? :(
Hello CentOS !
Iam trying to configure a Dual Core 1.6Ghz AMD E-350 machine to be able
NIC (eth0) interrupts the most efficient way possible so that I can be
able to handle the large number of random source packets per second.
Currently running CentOS 6.4 2.6.32-358.6.2.el6.x86_64, i made some load
testing with a random sourced syn flood to the NIC of this machine and
found out according to
2012 Jun 03
0
PCI Passthrough, AMD, fails to initialize
I'm looking for assistance with pci-passthrough on CentOS 6.2.
I've installed libvirt version: 0.9.4, package: 23.el6_2.8 from yum.
I have a windows XP client setup via virt-manager which boots and runs fine
until I attempt to assign a PCI device to it.
The error log reads:
-----------------/var/log/libvirt/qemu/SageTv.log----------------
2012-06-02 22:55:07.801: starting up
LC_ALL=C