similar to: Help in oh323 Gatekeeper + does not know what to do when bridging the call

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

Dear All, I have enabled the gatekeeper in oh323.conf file. I started the gatekeeper and also restarted the Asterisk. When I called, it was worked fine. After then enabled the routing mode in gatekeeper.ini file then I restarted the gatekeeper. When I called the routing mode didn't work. I have received the following warning in Asterisk console. " Jul 21 14:19:11

Hi Debian has a package for chan_oh323 (the original, external h323). It is not maintaind for quite some time AFAIK and also AFAIK offers no real atvantages over chan_h323. So I'd like to remove it. Before I do that, I have some questions, as I'm not familiar with H.323 channels: 1. Are there any useful features oh323 supports that h323 doesn't? That the version of h323 in 1.4.21

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received from the gatekeeper. so instead of duplicating a

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

hi IIRC, Jeremy once said that chan_h323 could be used as a gatekeeper but perhaps lacking a few features as compared to gnugk. Is this possible? I have some dlink DPH-100H phoes here for testing, but they require a gatekeeper, and if I can do it, I'd love to keep gnugk out of this. thanks roy

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

Hi, I'm wondering if there are any plans on adding secondary gatekeeper support to asterisk h323 channel drivers. Also I've noticed that chan_h323 is crashing asterisk at startup if primary gatekeeper is not available. Wouldn't it be a more correct behavior if it doesn't crashing but continue registration attempts in the background? Didn't test it with chan_oh323. Thank you.

I'm having trouble registering my asterisk to a cisco gatekeeper. I do not have control over the gatekeeper, and I know that it has user info defined in an LDAP. I have a user name and a password that I can use, but I can't seem to get Asterisk to register on the gatekeeper. I can't find exactly how I'm supposed to define the gatekeeper in the h323.conf file. This is the response

I have one and only one reason to use OH323, and that is it works with Cisco's CallManager. The standard H323 channel has one-way audio issues when connected to CCM and fixing them has been identified as a low priority/never going to happen task. Dan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

Hello, I'm trying to register with a gatekeeper using chan_h323, I have a Login, Password and a user (telephone) number, This is my h323.conf [general] port=1720 bindaddr=x.x.x.x (my fixed IP) gatekeeper=x.x.x.x (gk ip) allowgkrouted=yes allow=all [xx] (my login) type=h323 e164=111 (my assigned phone number) secret=1111 (my password) context=incoming I'm getting this error when trying

Dear ALL: I find that everybody discuss with asterisk-oh323 instead of chan_h323 of asterisk channels. Why do they choose asterisk-oh323 and not use the build-in module (chan_h323)? What different between these two componments? In my guess, the build-in module should be easy to implement rather than setup another application(asterisk-oh323) expect some bugs or failed functions on chan_h323.

---------- Forwarded message ---------- From: Tzafrir Cohen <tzafrir.cohen at xorcom.com> Date: Oct 4, 2007 12:56 PM Subject: Re: [asterisk-dev] chan_h323 and chan_oh323 compatibilities To: asterisk-dev at lists.digium.com Hi On Thu, Oct 04, 2007 at 11:46:30AM -0300, Caciano Machado wrote: > I'm receiving a lot of warning messages from my Asterisk > 1.2.5/chan_oh323 every time

Hi all, this is my actuel setup [SIP 2005]--[asterisk]--H.323 Trunk--[PBX]--[ext. 8900] Linux CentOS 3.3 (2.4.21-20.EL.c0) asterisk-1.0.1 asterisk-oh323-0.6.3b openh323_1.12.2 pwlib_1.5.2 Calling from SIPphone to the extension 8900 works always. Calling from 8900 to SIPphone works only sporadicly without any recognizeable pattern. Find below the output of the debug command: asterisk

Hi there, I am trying to register asterisk to a Lucent's MVAM GK. It is not registering to the GK with both h323 channels(chan_h323 and oh323). The problem is that if I set the GK(in asterisk) through the GK's IP, the GK answers with GCF without it's GK ID, and after that it does not answer to the RRQ, because the RRQ message has no GK ID. And when I set the GK through

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi all, Can someone share with me his experience in making asterisk-oh323 talk to quintum gateway without gatekeeper. My set up is QUINTUM GATEWAY ------IP----M ASTERISK (OH323) Both are gateways.. but I don't know what authentication I will set up in oh323.conf and how to set it up I will be glad if anyone can help Goksie

Hi, I am testing asterisk in several situations, I still can not understand why we have to deal with two different h323 channels... Here is the problem, I have a cisco 3700 who sends h323 calls to asterisk. then I process the call upon several users parameters, and send it to another cisco gateway. All the transactions are made in h323. I first tried with h323 channel, and had no audio... I guess