similar to: Nortel pbx & dtmf issues

Hi, I have asterisk running a single T1 card with a connection to a nortel CS 1000. All calls to extensions, local and long distance are working just fine. My issue is this: The nortel CS 1000 supports connections to and intercom system that is just line level audio to speakers. When my PRI tries to call this "extension" it is never answered so my AGI never runs to play a message

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Here is the CS1000 log. Again, the CS1000 using SIP accepts incoming calls just fine. However, using outgoing call files the CS1000 is hanging up after I answer the call. I dont know why? Thanks, for any assistance. Jerry my sip.conf entry is: [Nortel] type=friend dtmfmode=rfc2833 username=XXXXXXXXX disallow=all allow=ulaw allow=alaw

I am using asterisk 1.4.32 and wish to connect using SIP to a nortel 1000 switch with the ability to have 90 calls at a one time outgoing or incoming. the nortel reseller is asking me what to do. I dont know nortel at all. I thought I just needed a "SIP trunk and IP address of the their server and an account name, and provide her my IP address". They didn't know what to do with

Has anyone fed a Nortel BCM from Asterisk? I'm interested in switching our company over, but don't want to replace all the handsets in one fell swoop. I imagine some of the PRI cards can "emulate" a switch? I'd still like to pass CallerID into the Nortel, etc but all the external traffic would be VOIP, not TDM.

Question...I'm fairly new to Asterisk, but one location I'm looking at deploying Asterisk has an Option 11 in place already (it's actually in someone's HOME - long story). Does anyone know if it's feasible to interconnect the two and use Asterisk to interface with the other offices and lines, and merely use the Option 11 as a gateway to use the existing digital handsets

I am trying to integrate a Nortel Norstar system with an Asterisk service using a TDM04B card (4 fxo). So far everyting works from Asterisk to Nortel. The problem is when someone dials from the Nortel PBX to the Asterisk server. Asterisk answers the call and provides a dialtone (with DISA) but appartently the DTMF tones are not passed to asterisk and the call cannot proceed. This only

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com

Anyone get the Nortel 1140E phones working with Asterisk ? These look like great phones and I would like to start using them on our deployments. I know these will work with Asterisk but the sample config files are hard to find. My next step, if I cant find anything on this list is to purchase a Nortel Communication Server for testing. If anyone has a used NCS that works with these phone via SIP

We would like to present a toll free CallerID when making outbound toll calls. In the past, when our PRIs were directly connected to a Nortel CS1000 we could do this, without issue. Now that the PRIs are front ended by a mediagateway facing asterisk, we can no longer do this. Is it possible to set the billing number via a SIP header and set what should be presented as callerid as another header

I am connecting to a Nortel CS 1000. I can place calls out to an extension so we are half way there. When calling into the box I get the following from sip debug ip X. I get dead air when calling into the box. In my sip.conf I have a context of nortel and in extensions.conf the nortel context just has a s,1,Playback(demo-congrats). Any suggestions as to why the call in might not be working but

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp

Well I am entering into a realm that I don't know. 3 sites with Asterisk 1 site with Nortel Asterisk/Sip calls working fine between the 3 sites. Asterisk to Nortel set calls working fine. (call comes from asterisk to nortel and rings telephone, people answer and talk happens, hangup call clears) Nortel to Asterisk. Set on Nortel gets a busy signal. Any suggestions on what to look

I'm completely new to asterisk and while we have access to Nortel experts none of them know asterisk and since I'm the network guy I've been lumped with this. This is what I'm trying to accomplish We have a CS1000 that's sip capable. I want to be able to connect an Asterisk box to the cs1000 via sip as an IVR, so I can pass a call off to asterisk, go through some IVR menus

All, I am connecting to a CS 1000 nortel PBX. I can call out, I have limited success with call in. I get debug traffic that a call is coming in but I get the message "Unable to create/find channel". I was expecting that incoming calls over the trunk would be handled from my sip definition and goto the nortel context. It is not. Below is the actual incoming call debug information. I am

Dear List, Need to know if anyone on this list has had any experience with using the Nortel BCM 50 for Call Account Reporting using an IP connection to a Linux / Asterisk interface? Presently, I have a BCM 50 installed that uses a local Lenova Small Form Factor PC with a windows XP / os that quit reporting because of a up-grade to the Nortel reporting software. Nortel support is now telling

Has anyone had any luck getting an asterisk box to talk to a Nortel C15K softswitch? Or any Nortel "sip" products? I've been playing with it for several days and can't seem to pass calls either direction. I know that whike the Nortel says the C15K speaks SIP, it really speaks nortel's implementation of SIP, but I thought I could get it to at least pass simple calls back

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

I have a couple of questions I'm hoping folks can help me out with. When I search the mailing list, I see folks doing what I'm interested in so here's hoping ! - How are people making out with interfacing to the 7960? I'm considering buying a number of these as they look quite feature rich. But, are they easy to interface to? - Will I be able to interface with softkeys on

Hey gang, I'm looking at escaping from a Nortel Meridian CISC system to Asterisk/Digium/SIP phones. I'm currently in the testing and proof of concept phase. I'm going to need a SIP phone and don't want to re-purchase and have "orphans" around. We currently run Nortel 7310 phones and they work great. I'm sort of overwhelmed by all of the different IP phones. I