similar to: Problems with ReceiveFAX (asterisk 1.6.0.3 and t38)

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

Hi, On a new Raspberry2 with Asterisk 11.13.1 binary-installed, ReceiveFAX exits with FAILED status. Each attempt is made with something like: channel originate Local/12345 at faxgateway application SendFAX myfile.tif I'm not sure if failure "mostly" comes from SendFAX or from ReceiveFAX but it fails with 100% rate. uname -a output is: Linux myhost 3.18.7-v7+ #755 SMP PREEMPT

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

I can't get a test T.38 fax between 2 1.6.2 machines, using app _fax and spandsp pre17 and 20100501. The machines can't seem to get connected. send side extensions.conf: [fax-tx-test] exten=>s,1,NoOp(Context fax-tx-test) exten=>s,n,SendFAX(${FaxFile}.tif) exten=>s,n,HangUp() exten=>h,1,NoOp(FAXSTATUS: ${FAXSTATUS} FAXERROR: ${FAXERROR} FAXMODE: ${FAXMODE})

Morning, Have some questions regarding receiving and sending faxes... 1:st example: exten => 101,1,Answer() exten => 101,2,Wait(3) exten => 101,3,ReceiveFAX(/var/spool/asterisk/tmp/fax.tiff) exten => 101,4,System(tiff2pdf -p A4 /var/spool/asterisk/tmp/fax.tiff > /var/spool/asterisk/tmp/fax.pdf) exten => 101,5,System(mutt -s 'New FAX for you sir' -a

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

Hi, Do you have any example showing how to use SendFAX ? I can see several examples of ReceiveFAX but not a single one showing SendFAX. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081127/b41ca08b/attachment.htm

Is it possible to force T38 for all invocations ReceiveFAX() ? Receiving fax always worked OK on Callweaver though I could put SipT38Switchover() into the dial plan. I can't with Digium fax, and it always fails at the point it decides to switch to T38.

What I have is: * Asterisk 1.8.10.1~dfsg-1ubuntu1, * SPA112 ATA with analog fax in 1-st FXS port connected, * SIP trunk with provider supporting T.38. My network looks like this: * spa112 (192.168.33.200/24) and Asterisk (192.168.5.253/24) in neighbouring LANs, * Asterisk connects to the provider (80.75.130.136) via router (82.200.7.184). Router has full DNAT to Asterisk server. What happens?

Hello, I've got an analog phone which is currently receiving unsollicited FAX calls from PSTN. For learning purpose, I'm preparing an Asterisk/SPA3102 setup that would let voice calls come in and out and translate incoming FAX calls to TIF files (forwarded through email)). My target setup is : PSTN <-- analog--> SPA3102 Line Port <-- SIP --> Asterisk <-- SIP -->

Hi all, I have a question regarding using T38 for fax sending and here is my scenario: fax -> SIP ATA (T38 enabled) -> Asterisk #1 -> IAX TRUNK -> Asterisk #2 -> SIP ATA (T38 enabled) -> fax My question is, how can I know if I'm really using T38? is T38 information coming to the other side (because of SIP to IAX conversion) or just plain g711a data? I'm using Linksys

Hi, I remember seeing a T38 Gateway application for Asterisk 1.6 floating around, but I can't seem to find it again. Does anyone have any pointers to it? I really want to be able to send an incoming T38 connection directly to the PSTN. Thanks. -- James

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

Hello, I'm trying to send a fax with sendafax aplication and receive the fax with the receiveFax aplication on the same Asterisk Server (1.8..8.2). All work fine but the PBX always use T30 protocol. Is thes a variable or setting to configure Asterisk to send and receive this fax with T38 protocol only? Thank you Regards

My set up is 1.6.0.15 with the digium fax modules. I want to capture a fax from the internal analog fax machine (using an SPA2102), and then resend it. I know the internal extension of the fax machine, and for now I'm just testing it to one outside fax machine if I dial 8447. In particular, I'm completely unfamiliar with the use of "G" in the Dial app. exten =>

Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type : DIGIUM Description : Digium FAX Driver Capabilities : SEND

For our internal fax machines, I'm checking if the faxes are going to branch offices. If they are, I want to capture and email them to the branches. I've set up extension 8447 to test this. A fax machines is connected via an SPA 2102 on 173. Any calls from 173 are sent to: [outbound-fax] exten => 8447,1,Answer() exten => 8447,n,GoSub(Capture-Fax,s,1) exten

dialplan [FaxIncoming] exten=s,1,NoOp(Incoming fax on 46-va) same=n,Set(FAXFILE=/var/spool/asterisk/fax/${STRFTIME(${EPOCH},,%Y%m%d)}_${STRFTIME(${EPOCH},,%H%M)}) same=n,Answer() same=n,ReceiveFAX(${FAXFILE}.tif,df) same=n,Hangup() exten=>h,1,NoOp(FAXSTATUS: ${FAXSTATUS} FAXERROR: ${FAXERROR} FAXPAGES: ${FAXPAGES} @ bitrate ${FAXBITRATE}) same=n,System(scp ${FAXFILE}.tif

I am testing out inbound faxing using res_fax and res_fax_spandsp.so My system answers the call but then sets there on the ReseiveFax line then comes back with an error that it exceeded the maximum retries. How would I go about debugging this? Below is my very simple dialplan code I am using, and the fax show version gives the following as well. FAX For Asterisk Components:

Hi all, I've got a perl agi script that exec()'s the FFA version of receivefax to... receive a fax. However, after the fax is received, the script seems to die. This is what I have: $main::agi->exec("receivefax","/tmp/${$}.tiff|fs"); $main::agi->verbose("FAX COMPLETE",1); I never see the "FAX COMPLETE" message on the console, I've set