similar to: CAll-limit or incominglimit ?????

Greetings listers. I'm running asterisk 1.4.21.2 on SUSE 11.0 using Polycom 501 phones. My outgoing connections are Zapata using a TDM401P. For the most part I can make and receive calls fine except for these 3 issues: 1. When I call an external conference, the call never bridges and hangs up after 60-90 seconds. 2. When I call another number there is a

Hi All Has anyone managed to get the hint priority with Swissvoice IP10S phones working? I have 2 phones: a Snom 360, setup as the reception phone on extension 11, and a Swissvoice IP10S on extension 12. When calling each other (tested both ways) I can only ever see the Snom 360 in the Active State from 'show hints'. The Swissvoice stubbornly remains in the Idle State when on a call!

" Hello, I have been trying to get my Grandstream GXP2000 phones to stop showing ringing state on monitored extensions. But no matter where I put notifyringing=no asterisk still sends the ringing state to the phones. Is this a bug I should report or is there another way around it. Here is how i have my subscriptions setup: extensions.conf [demo] exten => 6100,hint,SIP/100 exten =>

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

Hello, Right now I have app queue working with incominglimit=1, there is no call waiting signal, but after a while( like couple of hours) some phones randomly get stuck. The * thinks that they are in use and doesnt ring them, when they are infact not in use. sip show inuse, shows that they are inuse. typing reload on the console resets this and they are again available for working. anybody

Hello, we want to setup the following scenario: - each user has a softphone AND a hardphone - the softphone is started with the operating system - the hardphone is connected all the time using SIP - only ONE extension for each user Both phones should ring when the user is called. We've setup an asterisk 1.4.18 and at the moment only the last registered client rings. In Asterisk 1.2 the

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Hi all, I have some peers configured in SIP.CONF file with parameters incominglimit and outgoinglimit set up to 10. By doing that, I expect that this peer will not be allowed to handle more than 10 incoming calls and 10 outgoing calls at the same time. However, since I upgraded to Asterisk 1.2.17, I started to face a problem. Sometimes, calls to those peers are not connected. When I check the

Hi, I seem to have a problem with chanisavail and the call limits on sip phones(incoming and outgoing) The problem seems to be that chanisavail when trying create to create channels and hanging them up afterwards screw up the current usage limit on the phones. Example with chanisavail: Phone A calls voicemail (usage now 1) Phone B tries to call Phone A and uses ChanIsAvail in the dialplan.

For those that don't read every line of source code here's something I found out today... -------- Deprecated incominglimit and outgoinglimit Incominglimit = number of calls the local extension can originate to Asterisk. Outgoinglimit = number of calls Asterisk will terminate to local extension. End of Life for these commands announced**, please use setgroup and checkgroup, that will

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Hi All, This is the first time I'm submitting a patch, and I hope it fixes more than it breaks. I'm putting it here, since John Todd mentioned a while ago about the heavy load Mark and crew have at Digium (doing such good work), so I thought all of us could test this first, and if ok submit for inclusion in CVS later if appropriate. This is an extension to work done earlier (sorry I

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Relatively new to Asterisk and SIP and am trying to run a proof of concept using Asterisk to make an outbound call through an Audiocodes gateway via SIP using Asterisk version 1.6.1.12. The specific requirements of the gateway in the configuration I am trying to use specify that the Name part of the From header be blank with the outbound number that needs to be dialed in the number field of

Hi all! I am trying to figure out how DEVICE_STATE is working, no luck so far. sip.conf [0317998975] type=friend regexten=0317998975 secret=???? username=0317998975 callerid="Magnus Benngard" mailbox=0317998975 at inputinterior.se host=dynamic canreinvite=yes dtmfmode=rfc2833 nat=yes disallow=all allow=alaw extensions.conf exten => 0317998975,hint,SIP/0317998975 exten =>

incominglimit is already implemented for SIP. Just specify under the endpoint how many incoming connections are allowed. For example, [cisco] type=friend username=cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away

Greetings List. we're facing a strange case with my system where in the middle of the call .. after like 7 minutes (not necessarily ) the callee is unable to hear the caller however the caller is able to hear the called party. the scenario is the following. 1- 15 computers running Windows XP SP3 joining a Windows Domain Controller with DHCP , DNS, ISA Internet Acceleration Server. 2- Internet