similar to: ITSP's no longer supporting IAX?

We are developing an IVR application and when I am testing locally on my machine using a softphone (iaxcomm) the digits I press for GET DATA work every time. I am testing with a local extension that goes right into my routine. However when I try to call in to the system using an analog or cell phone GET DATA drops some digits that are pressed. There doesn't seem to be a pattern to which

I really hate to have to make a post like this, but I feel I have little choice but to relay to the group my experience with Teliax, and explain why I recommend against using them as a primary Voip-> PSTN provider. I hope that a letter like this will inspire companies like Teliax to work harder at customer service, as well as circuit stability. We need more companies that offer the types of

I'm looking at switching VOIP providers, but want to ensure I move to a company with sufficient capacity. Can any Canadian VOIP users post/email me with feedback on their providers? I'll post the results for all to read...... -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm looking for a new Internet Telephony Service Provider for my company in Canada to terminate calls from my Asterisk PBX. Ideally I'd like DiDs in Otawa, Toronto, NY & San Jose. Anyone out ther who can help me with a recommendation? Vonage seemed clueless when I called them. Broadvoice is good but no Canadian DIDs... Thanks, Hugh -------------- next part -------------- An

Is there a simple way to get call volume from a particular trunk within the dialplan (for conditional branching)? I suspect we will have to build an AGI script but I'm hoping something new in Asterisk 13 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150627/6774c750/attachment.html>

I have been looking at moving from SIP-based DID (Illinois) providers to one that uses the IAX protocol for DIDs. After a search, I've come up with the following: http://connect.voicepulse.com -- $8/month, many rate-centers http://www.iax.cc -- $1.50/month + 0.014/min, many rate-centers Can that be all that there is? I like the pricing plan at iax.cc, because it would allow me to set up

Has anyone found an ITSP that will relay T.38 fax to an asterisk 1.6.x instance AND do it reliably? If so, I can think of a number of locations with copper loops that could be scrapped. I'm actually quite surprised at what an underwhelming number of ITSP's that say they support T.38 (zero so far among my normal go-to companies). For locations that just want to be able to send

?I meant how many calls are in progress on a particular trunk. (Sorry - I didn't even think of the other interpretation). ________________________________ From: asterisk-users-bounces at lists.digium.com <asterisk-users-bounces at lists.digium.com> on behalf of Matt Riddell <lists at venturevoip.com> Sent: Sunday, June 28, 2015 9:26 AM To: Asterisk Users List Subject: Re:

We have a small office installation running over a cable modem. (8M down, 500k up confirmed with numerous speed test sites) When a single call is up, call quality is fine. When a second call is up, outbound audio is immediately choppy. We're using ulaw, and confirmed that traffic with 2 calls is <175kbps in/out. (IAX connection out) Asterisk doesn't report any dropped frames, the

Hello: I need to be able to reliably send out touchtone to any calling party who comes into my pbx. The standard things to help with this have been done as far as I know: 1. dtmfmode is rfc2833. 2. The phones themselves are set to rfc2833. 3. allow=ulaw 4. On internal calls between extensions, touchtone works fine. Also, I have reviewed sip.conf with my carriers. Now for the

I have a Vitelity DID which generally works, but calls from a particular caller do not reach it. Vitelity has thus far disavowed any responsibility for working through this problem. I recognize that some action might be required by another provider which is outside Vitelity's control, but it seems that they should at least be trying to help resolve the problem by helping me determine

Hi, Red Hat 9.0 Asterisk 1.2.7.1 Whenever I start Asterisk, I am unable to call out on my SIP channel: >-- Executing Dial("Zap/1-1", "SIP/6137451576@6477235412||t|") in new stack >Apr 30 11:02:00 WARNING[12814]: chan_sip.c:1973 create_addr: No such host: 6477235412 >Apr 30 11:02:01 NOTICE[12814]: app_dial.c:1029 dial_exec_full: Unable to create >channel of type

With the recent service outage at Broadvoice, there has been a lot of discussion here, on broadband reports, Voxilla, etc., regarding whether VOIP is mature, or "ready for the masses", etc. One particular point I've seen repeated, and with which I agree: "we're willing to deal with less than five 9s, even one or 2 9s, as long as we have good communication regarding the

Hi All, When I want use Asterisk as a PBX to cooperate SIP ITSP, I can not set the caller ID, so SIP ITSP do not accept the call. In Asterisk, I set a account in sip.conf to register on ITSP SIP Server: register => 6292@218.1.121.237/6292 And I added a user 6292 in Asterisk just like the account on ITSP SIP Server: [6291] type=friend username=6291 callerid=6291 host=dynamic

Asterisk 1.2.7 Redhat 9 I have DiDs from two different ITSP both set up as IAX2. Each one works when it's the only one in my iax.conf, but when I have them both defined in iax.conf at the same time, only one will work. My iax.conf is provided below. Any ideas how to fix? I'd like to use both DiDs! Thanks, H My iax.conf is below. When I dial the DiD provided by ITSP_B, the other

Asterisk Users, Has anybody use Voicepulse Connect for Asterisk? I am trying to cover all my bases because in the past, I got burned with poor quality of service, along with failed DTMF tones with 3 different SIP Providers (Vitelity, Broadvoice, and Teliax). I am running Asterisk 1.2.13 on the Debian Etch system, using the SIP protocol. Any insights would be great. Thanks. -John

It seems to me that ITSP's like to use a US dialing code eg 1-xxx Wouldn't it be cool to have an Internet dialing code?? I don't know what the structures are or how the allocations work but it would be so cool to know that 1-xxx was USA , 44-xxx was UK and yy-xxx was an internet phone.. That way the whole internet phone space could be consolidated into a single dialing structure

Good Morning, I would like to know if is possible to do a conference with 9 client with asterisk. The client is connecting to sever through lan, we think don't use PSTN or ISDN. Thanks, Alberto -- Alberto Carlana <alberto.carlana@virgilio.it> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes

when I enter asterisk-addons-1.4.1 and make menuselect ************************************* Asterisk-addons Module Selection ************************************* Press 'h' for help. XXX 1. app_addon_sql_mysql

Hi, Does anyone know who did the prompts for French and Russian for Asterisk? I need some custom prompts. Regards, Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160511/ae5eea65/attachment.html>