similar to: RTP/NAT Traffic to private IP

Sorry but what does the ACL mean and its relation to the bindaddr? Regards Bilal > > 30 jan 2009 kl. 16.59 skrev Mike: > > > hI, > > > > Trying to understand how to setup two PRIs in > sip.conf. Using > > Asterisk 1.4.23. > > > > I have a provider giving me two PRI (different rate > centers) through > > SIP. Both PRI comes in from

I have a working LVS-Setup on CentOS 5.4 with the following settings in sysctl.conf: net.ipv4.conf.lo.arp_ignore = 1 net.ipv4.conf.lo.arp_announce = 2 net.ipv4.conf.all.arp_ignore = 1 net.ipv4.conf.all.arp_announce = 2 Now I''d like to use shorewall, but after activating it, shorewall changes both arp_ignore values to 0. I just found out how to set arp_ignore for separate interfaces, but

Hi, We are running Samba 4.0.9 running on centos 6.5 (64bit) with SecureLinux disabled. Having some share access issues, what are we missing to solve this puzzle? We are attempting to get the MSDFS share working. Until we can fix this we cannot continue. This is the Domain provision and dns, and reverse zone setup. Dhcp server set point all clients at samba as primary dns server. Nslookup

Hi to everybody, I want create a VPN with some PC clients and only one server, instead of LAN-to-LAN, but I'm not very sure how to do this. For example, I need to have: - Server LAN -------- (192.168.0.1/24) ---- tinc-VPN ---- (192.168.100.1/24) - Client-01 LAN --- (192.168.50.1/24) ---- tinc-VPN ---- (192.168.100.10/24) - Client-02 LAN --- (192.168.80.1/24) ---- tinc-VPN ----

Hi all... I have configure a Shorewall gateway to my little lan im my home. The shorewall work fine here... However, when I try to use Limewire, I can download nothing.... On fact, I can''t get any high connection on Limewire.. What can I do to make Limewire work properly behind a Shorewall gateway???? May be I have to open all port (both tcp and udp), but how? Thanks a lot... Best

I can't get rid of an old network I had configured on my Samba server, it was PDC on two subnets, and one of those nets are now gone. Still Samba tries to become PDC on the subnet (192.168.100.10). So, in my logs I get hundreds of these messages; [2007/07/26 22:38:57, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) get_domain_master_name_node_status_fail: Doing

hello, i did some debugging today, here is the weird portion form sshd -d -d -d debug1: userauth-request for user jholland service ssh-connection method hostbased debug1: attempt 1 failures 1 debug2: input_userauth_request: try method hostbased debug1: userauth_hostbased: cuser jholland chost i2-0. pkalg ssh-dss slen 55 debug3: mm_key_allowed entering debug3: mm_request_send entering: type 20

I''m trying to get Shorewall to use ulogd for logging, but I''m not seeing any logging in either the file I set up for logs, nor in /var/log/messages (where the logs used to be). I''m running a stock Debian 3.0 woody system, with a custom 2.4.21 kernel. I used all the settings as described on shorewall.net when configuring the kernel. ulogd (0.97-1) and shorewall

My Internet gateway is using ADSL PPPoE connection with dynamic public IP assigned by ISP. My Internet gateway is Redhat AS3 U2, shorewall 2.0.9 As my ISP provided 4 simultaneous pppoe dailup connection for the same physical adsl line. My linux server can be configured for multiple pppoe connection i.e. ppp0, ppp1, ppp2, ppp3 Is it possible of shorewall to assigned say ppp0''s IP is

Ok. That''s probably really confusing. :) Here''s what I''d like to do. If it''s something that''s overly difficult or just plain stupid, let me know. :) I''m on cable with a dynamic IP. I have a domain forwarding account pointing to me. That is techiem2.no-ip.com. The firewall is 192.168.100.1. My web server is on port 444 on machine

Hi, can I establish interdomain trust between two domains across NAT. If yes, please how??? Thank you, Sopik Bronislav

Hello all - I am running rsync 2.5.6 on two FreeBSD 5.0 machines. I have experimented with running rsync using ssh, with command lines like the following: rsync -rv --progress jimbo@192.68.100.10:/usr/share/smbshare /usr/home/jimbo And also with running rsync as a daemon on the master server, and syncing to it from the other machine like so: rsync -rv --progress 192.168.100.10::test

I have replaced several NT servers with SAMBA on FreeBSD 4.7. The versions of SAMBA vary from 2.2.7a to 2.2.8. The SAMBA servers have been joined to the domain and show up as Windows NT 4.9 Server under Server Manager on NT. I am now down to two remaining NT4 servers that are domain controllers. I am experiencing two issues; NetBIOS resolution seems to have gotten messed up and the logs on the NT

Hello, I've created a routed network that forwards to a physical interface: <network> <name>default</name> <forward dev='eth0' mode='route'/> <mac address='52:54:00:f2:5b:4f'/> <ip address='192.168.100.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.100.10'

Hello! I want to SSH from host to specific guest using hostname, e.g. ssh <user>@<guest> or ssh test@vm02-fai ssh to guest using IP works w/o issues. I found Wiki article for "NSS module" (http://wiki.libvirt.org/page/NSS_module), but there are no results for the following commands: ld4004:/home # virsh net-dhcp-leases default Expiry Time MAC address

I have a problem with Samba: I want to make trust between two Samba domains. I have setup the trust on the DOMAINB server then on the Samba DOMAINA server "net rpc trustdom establish DOMAINB" I then get the following: Password: [entered password] Could not connect to server SERVERB [this is the PDC for the DOMAINB domain] Trust to domain DOMAINB established When I then try

According to the smb.conf man page, the "dos filemode" parameter will allow a user who is not the owner of a file to affect permissions changes on a file or folder provided he has write access to that object. This does not appear to be the case. Users with write access via user or group ACEs receive an "Access denied" error when attempting to make ACL changes via windows,

I have a problem with Samba: I want to make trust between two Samba domains. I have setup the trust on the DOMAINB server then on the Samba DOMAINA server "net rpc trustdom establish DOMAINB" I then get the following: Password: [entered password] Could not connect to server SERVERB [this is the PDC for the DOMAINB domain] Trust to domain DOMAINB established When I then try

Hello! I have upgraded all libvirt packages to version 3.5.0-655.1 and restarted host. This is the current default network config: ld4004:~ # virsh net-dumpxml default <network connections='1'> <name>default</name> <uuid>f511d113-d7d1-4714-ad2b-be29ef8f7fc4</uuid> <forward dev='br0' mode='nat'> <nat> <port

I have a problem with Samba: I want to make trust between two Samba domains. I have setup the trust on the DOMAINB server then on the Samba DOMAINA server "net rpc trustdom establish DOMAINB" I then get the following: Password: [entered password] Could not connect to server SERVERB [this is the PDC for the DOMAINB domain] Trust to domain DOMAINB established When I then try