similar to: Looking for SIP loud ringer

Working on a paging system for one of my sites and running into something I can't believe is this hard. In one of the zones, they want to have three different extensions ring over the pa system, using it as a loud ringer. Now the paging system does have a loud ringer built in and I can easily have it do a simultaneous ring, but all of the extensions will sound the same over the loud

Anyone have some recommended equipment for alerting people to calls in a noisy environment? I have Polycom IP550 phones set up in some really noisy environments - our mine hoists - and they tend to drown out the ringers. I'm using Clarity WR100s now. They're analog devices, attached to Linksys PAP2T ATAs as part of a call group to get a loud (advertised as 95dB) ring out there, but it

Asterisk 1.2.13 I am trying to figure out the best way for a night bell at work. Note: I have no spare buttons available on the phones. But I do have two lines and two park positions as buttons. Option 1 (easiest and the one I just implemented) When asterisk is in night mode, Connect to IVR, List all options and then if they dial 0 or timeout, ring every phone in the

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

Hi list, Does anyone have any advice on the following: Incoming calls to our office come in on a SIP trunk. Since all our offices/desks are in close proximity, we would like just a single phone to ring when a call comes in instead of ringing every person's phone. Currently we've got this working by having all the phones in a callgroup/pickupgroup and incoming calls ring the

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

On Tue, 4 Jan 2011, Andy Graybeal wrote: >> The Polycom 321 has not been EOL'd and supports VLAN. It is, however, >> lacking a 2nd ethernet port if you were to go that route. >> >> -M >> > Thanks for the response Mark. I see the 331 has two ports and the same > features as the 321. > > I'm wondering what phone would be best being used as an

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Hi, Snom phones firmware 5.0 is now out. Try it if you like: http://www.snom.com/wiki/index.php/Main_Page. Regards, --------------------------------------------------------------------- Usman Tahir snom technology AG www.snom.com --------------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Setting up pick/callgroups really tightly is the way to go - one of our techs here does that all the time for clients. PaulH On Wed, 2007-06-20 at 20:51 +0930, Tom Lanyon wrote: > Hi list, > > Does anyone have any advice on the following: > > Incoming calls to our office come in on a SIP trunk. Since all our > offices/desks are in close proximity, we would like just a

I am using SugarCRM together with the asterisk plugin, which allows me to click a number, SugarCRM calls my extension then places the call when I pickup. I would like to have that extension auto-answer. I set it up as line 3 on my phone so normal calls do not get auto-answered. However, I have not been able to get this to work. Has anyone implented this? This is what I put in the config file

I am using 11.17.0 - and MulticastRTP. Doesnt seem to work with polycom phones as other devices receive my multicast just fine. Is there something special to do to get multicast working with polycom phones? (other than enable multicast on the actual phone). Thanks Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

Hi guys I'm using asterisk 1.4 and going on to Snom phones. I'm trying to add a sip header to make the Snom phone use a different ring tone on one particular incoming number. I have added the following to the dial plan of the incoming context +------+------------------+-------+----------+--------------+-------------------------+ | id | context | exten | priority | app

I am preparing to setup a system using Cisco 7940 and 7960's I have the 7.1 SIP firmware on them. One issue I have run into is how to silence the ringer if a call comes in and you don't want to take it. Many phones have a DND button. I know the 79XX has the DND in the menu but it is to cumbersome to go into the settings then phone preferences then the DND and select yes. Is there any other

Hi All; Any one used Digium IP Phones D40? I need to know if they are stable with good voice quality? Comparing to Polycom 330, which is better? Let us talk frankly although I know that we have to support Digium. Regards Bilal

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there