similar to: route based from source

if i have this setup: [sip users] -- [asterisk] --- [as5300] --- [pstn] asterisk will talk to as5300 using sip. i will use as5300 as a trunk on the asterisk so sip users can call out to pstn. what i would like to is do prepaid on those trunks, not on the sip users. sip users can call any other sip users . i want to do it that way coz i'm trying to build a multi-tenant pbx, and i will use

Hi All, is it possible to choose outbound route by checking the extension of the caller? e.g extension that starts with 3 goes to outbound route 1 extension that starts with 4 goes to outbound route 2. Basically, i'm hosting two(2) office, extension 3XXX is office 1 and extensions 4XX is office 2, they both have the same dialling pattern so i need to choose route based on source.

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Hi, Anyone knows a DID provider that can do both outbound and inbound? Regards Nhadie

Hi All, I'm trying to use the orginate cmd. I have it working if originate is from a user e.g. SIP/7777 originate SIP/7777 extension 987654321 at outbound-route What i'd like to be able to is instead of a local extensions i would call an outside number then connect it another outside number. e.g. originate SIP/85431210 at outbound-route extension 987654321 at outboudn-route is this

Hi, Is it possible to use realtime for Music On Hold? Is it also possible to store the music/audio files on the database, same way a voicemail can be stored on the database? Thank You Regards, Nhadie

I am going through previous posts, but I am not finding anything. I apologize if this has been covered already. I want to be able to change the CallerID for outbound calls based on the extension making the calls. However, I don't really need this level of granularity. I have one asterisk box serving many markets. I want to set the CallerID to a local number in each market. So, of someone

Hi, I'm running asterisk realtime, i had prob when a user does not unregister properly. I tested with SPA942 and a PAP2, when phone is registered, i call using the SPA using x-lite no problem, but when i unplugged the power, it does not unregister properly, so asterisk think SPA942 is still registered, when i call using x-lite, asterisk tries to call it.so it gets stuck at [Aug 11

Hi, I'm using gotoiftime on asterisk, but it seems  there is a difference between the asterisk time and the system time. could it be because i adjusted the system timezone on my linux? do asterisk not detect the change of timezone on the system? How can I fix this prob? Regards, nhadie -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Is it possible to assign a plus sign on the callerid(num) ? currently this is what i do CALLERID(num)=+6523450017 but telco is denying calls, coz they said they are seeing "bs523450017" instead of +6523450017. i tried putting it inside double quotes CALLERID(num)="+6523450017" telco says the same thing. is this possible? thank you Regards, nhadie

hi, hs anyone able to make video to work on asterisk? i tried following this: http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+xten+eyeBeam i can see that eyebeam is trying to broadcast a video but the other eyebeam is not receiving it. i tested the same setup but this time using ser with rtpproxy and eyebeam video works fine. any ideas? where do you think should i start

Hi, Is there a way to limit only one registration for each user at a time? meaning if a user tries to register, but that user is already registered. i will deny? or is it possible to for a single user at the same time, and when someone calls that user, it will ring both phones? Just want something whereby a user can assign his extension on an IP phone in the office, and assign the same

Hey list, I have a problem when I host 2 SIP-accounts on the same Asterisk-server. Asterisk picks out the SIP-account on alphabetic order A --> Z. In my sip.conf : register => user1:passwd1 at server/user1 register => user2:passwd2 at server/user2 [YOCAN-3starsnet] type=peer host=server username=user1 secret=passwd1 fromuser=user1 accountcode=user1_in [ITCENTER-3starsnet] type=peer

Hi, What does retransmitting NAT means? I have a client that uses SPA 942, and his phone sometimes cannot be called. i did a sip sebug and i keep on seeing retransmitting NAT. on the realtime it shows that it is registered, so when i try to call it , asterisk thinks it is still online so it tries to reach it instead of saying it's unavailable, [Oct 9 11:10:33] -- Called 103100 it

Hi, Need help on mysql cdr, i keep on seeing this log on the console. but my db is up and i see the calls being logged on the cdr table. is there a timeout when there is no activity? can i remove the timeout if there is any? thanks [Nov 25 13:22:37] ERROR[21026]: cdr_addon_mysql.c:171 mysql_log: cdr_mysql: Server has gone away. Attempting to reconnect. [Nov 25 14:20:32] ERROR[21061]:

Asterisk is an excellent PBX system, and makes a very good endpoint in the SIP chain for all sorts of things -- IVR systems, voicemail applications, automated messages, etc. It has an extremely well-written CDR engine, so many people mesh it with billing applications to produce accurate accounting information. It also is fully aware of the media stream, which means it's capable of cutting

Hi All, kind of need help on the conference module, i'm using freepbx and enabled conferencing, i created a conference number, 6000. when i dial to it, my phone says it is connected but i'm hearing nothing, maybe logs below can help you. also, when i hang up the phone, the conference did not disconnect me. how can i end a conference? thank you -- Executing

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Greetings list, Whilst running through a routine check of some CDRs, I've noticed that the originating channel's accountcode isn't preserved on creating a local channel. For example, if we start with: exten => 123,1,Set(CDR(accountcode)=foo) exten => 123,n,Queue(bar,nrtw,,,) And the queue 'bar' is defined as follows: [bar] member => Local/456 at outbound member

Hi, Is there a specific latency that asterisk accepts? I encountered a problem wherein when the latency was unusually high,my xlite's (i have 2 xlite) cannot register. but when the link suddenly went stable, the x-lite just registered. what i forgot to look at is if the registration packet is reaching my asterisks. ------ when xlite cannot register --------------- Pinging