similar to: DTMF does not work

Having big problems and for months. Our service provider (via:talk) says they are Asterisk friendly but they are not. Here are the specifics (please read the bottom of the msg too) System: Dell SM Business server 2GB RAM, Core II Processor (should be plenty) OS: open SUSE 11 Asterisk Version: 1.4.2 Asterisk GUI Version: 2.0 The system was completely set up using the Asterisk GUI with a

First of all Merry Christmas. Second, my first problem with my provider not staying registered with our server was my fault. We moved our server room and I restarted the test system and the production system causing them to ping-pong back and forth registering with our provider causing random problems, they are both set to register with the same account right now. I shut Asterisk down on

Hi everyone, having a issue with asterisk and my new Voip providers service. Iv set up many asterisk systems before but never seen this and have tried to fix this with no luck.. I have used this exact same sort of setup for 5 other providers and never had this issue, If i replace the trunk login details with my works voip account and set it to IAX then it works perfect, Just not the new

Hi, I am trying to setup a simple home voip service w/ * I have compiled and installed the svn source as a first step I am trying to configure SIP for inside my network. I have a handful of softphones and a few hardphones that I want to all be able to call each other I have configured users.conf with a single softphone(kphone) and have tried calling itself (ext 6000) and the demo from the

We have multiple entries like the one below in our users.conf file... where the username. Contact and secret changes for different customers and we register on their behalf to the Service Provider. For the trunk below: when the call is placed out, Asterisk (1.4.18) sends the username of "abc.com" in the MD5 Auth .....which obviously does not match the trunk setup for this Customer with

Hi, I am using TDM400 card with 3 fxs and 1 fxo. I am struggling to detect hangup tone or disconnect supervision tone from my CO. I attached the recorded wav file which contains my telco's disconnect supervision. I am using , asterisk-1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI

Hi, I am attempting to setup an asterisk server, current specs: CentOS release 5 (Final) Asterisk 1.4.11 Asterisk-gui checked out from SVN last week I started with a fairly basic setup involving one VOIP provider who provided one dial in number, and a couple of handsets. Config files are below. It was pretty much totally built by Asterisk-gui, except for the fact I had to add

Update on this: I found that by changing insecure = very to insecure = invite, adding the second trunk no longer stopped calls working. I've read the documentation on this switch and still don't see how it applies/is meant to get used. Anyway, with this change in place, the following may help: asterisk*CLI> sip show registry Host Username

Hi All, Anyone have any idea what could cause incoming calls on a SIP channel to no longer be able to use DTMF? DTMF on incoming calls on zaptel and on local SIP softphones and ATAs all work fine. Nothing gets registered in the CDR or on the console in verbose level 10, it just times out. I haven't changed anything on my part and can't get through to Viatalk tech support to ask them

Hello, We have 2 SIP trunks from Bandwidth.com and if both are in use and someone tries to dial out, they cause another call to get one-way audio (the caller hears us, we cannot hear them). This happens 100% of the time and Bandwidth.com doesn't offer any support. I don't see any setting that tells Asterisk that there are 2 channels available from Bandwidth.com's IP. I'm

--- span_1 = DAHDI/g11 1,1,dial(${span_1}/${EXTEN:0}) --- The configuration was rsync'd from a working pair of asterisk servers in another office. The only difference was the version 1.4.22 for the original servers that were operating as expected, 1.4.24 and 1.4.24.1 for the new servers. Included in both working and non working servers is the following configuration:

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

I have a SIP phone calling via a SIP trunk another asterisk system, that then sends the call out a ZAP channel. When I press any of the features defined in features.conf, The end user on the ZAP side hears the DTMF tones, and none of the features work. My DTMFmode on the SIP users definition is rfc2833 Asterisk console doesn't register that a feature is being recognized, any ideas? Below

I got a Wellgate 3804A and need some hints: Both have public IP *.131=asterisk (1.6.0.1) *.133= Wellgate Wellgate 3804A settings (Line1~Line4): 1. Sip Config Mode: Proxy Primary Proxy IP Address: *.131 Primary Proxy port: 5060 Line1 Number: 1002 2. Security Config Line1 Account: 1002 Line1 Password: ****** 3. Line Configuration Line1: Type=FXO, Hunting Group=2, Hot Line =

It gets hard to read my logs when every time someone makes a phone call it displays long pages of "Dropping voice frame". Anyone encounter this before? Asterisk is bridging two SIP lines together, so the technology should be the same. Maybe I'll try allowing only ULAW. ************************************** Asterisk Standard debug (level 3)

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

Connected to Asterisk 1.4.11 currently running on asterisk (pid =3D = 31999) -- Remote UNIX connection Verbosity is at least 8 -- Executing [00425298582 at numberplan-custom-1:1] Macro("SIP/8001-b7d0bb20", "trunkdial|SIP/trunk_3/0425298582") in new stack -- Executing [s at macro-trunkdial:1] Dial("SIP/8001-b7d0bb20", "SIP/trunk_3/0425298582")