similar to: Problem: no such extension 'xx' in context 'default'

I am trying to set up a Grandstream GXV-3000 Video phone to Asterisk ver 1.2.21.1. The problem I'm having is that it can call other SIP phones, but not vice versa. Can someone tell me where is the problem? TIA! Here's part of my configurations: ---------- sip.conf ---------- ; 113 is the Grandstream phone [113] type=friend username=113 secret=secret context=default dtmfmode = rfc2833

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Dear all I have asterisk setup now what happend when i dial 4 digit number my asterisk wait for few digit why when i press # key it is dialing fast but without # wait for few number is there any configuration for dialplan I have setup asterisk with avaya system i have 5 avaya system on 5 location i use 16XX,22XX,33XX,44XX,20XX to reach avaya extentions but when

Hi everybody, Well, I've finally got asterisk to to talk nicely with my Intertel pbx. Currently there is a outside T1 line (e&m wink start, esf, b8zs) connected to asterisk, and then asterisk connected similarly to my Intertel pbx. For right now all asterisk is doing is passing calls between the two. When I call out from the pbx, I can connect perfectly to the outside world. When I

I have Asterisk running with a combination of SIP and H323 clients. I am using the OH323 module instead of the H323 one. When the SIP clients ring each other, they can hear a ringing noise in the ear peice to let them know that the other parties phone is ringing. However, when the H323 client rings a SIP client, there is no ringing sound at all, although as soon as the called party picks up the

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hello all. I'm having a problem debugging an IVR I'm building. I can't see any reason this shouldn't be working. Firstly the asterisk version is: Asterisk SVN-trunk-r7230 built by root @ localhost.localdomain on a i686 running Linux on 2006-02-17 22:44:48 UTC Basically the problem is this. While the playbacks are happening you can push any one of the options and to happily

Hi List; Can someone advise me why in the below context, it does not run the Background step? Once I dial 1000, then it hangup and give congestion signal? If I comment the ResponseTimeOut, then it run the Background but it does not wait till caller enter the digits, once the sound file finish, then it hangup (congestion signal), also in all the situation, it does not go for the t extension, why?

Hi, I run into a problem and I'm not shure what do I misconfigure. I've a B410P ISDN card with bri_cpe signalling and two Openvox (A1200, A800) cards with fxo_ks signalling, all with dahdi drivers. I can receive fax from a public number, but I can't send fax. The CLI says it picks up the line but no dialing. I tried the extension with an analog phone, it works fine, I can dial

Hello everyone, I've just upgraded from 1.6.1.9 to 1.6.2.13. I have noticed that (after the upgrade) abandoned calls within the Queue produce no cdr at all. I am using unanswered = no (the default) in cdr.conf. The call shows, as expected, in the queue_log as ABANDON The dialplan is: Ringing(); Answer(); // need to answer or no music! goto

Hello,For the time being I am using the following line to play the original saved message by Asteriskexten => 7001,n,Playback(vm-nobodyavail)Now I am trying to use the other features for Asterisk's voicemail. I have recorded a message, and I can see it saved on the system, but still Asterisk keeps playing the original message... Is there something I can add to let the subscriber plays his

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Dear all I have Asterisk which is connected with avaya through E1 back 2 back now i have on asterisk side G.711 codec and Avaya also useing G.711 codec everything fine. I need G.729 on my asterisk side. can i have lots of SIP phone on my lan and issue is i have 2 to 3 building so problem is LAN is congested thats why i need G.729 Now testing perpose i have download

Hi all, I am trying to set up DND in my asterisk, I am using the following context: [app-naoperturbe] exten => *11,1,Set(DND=${DB(ddisturbe/${CALLERIDNUM})})exten => *11,2,GotoIf($["${DND}" = "YES"]?*11,3:*11,101)exten => *11,3,Set(DB(ddisturbe/${CALLERIDNUM})=NO)exten => *11,4,Playback(beep)exten => *11,5,Hangup()exten =>

I am using Polycom 501s with asterisk 1.2.4. When transfering to call parking wih "#1" -> 700 the user is able to hear asterisk tell him what extension the call was parked on. However, when I press "transfer" -> blind -> 700 . The user is not able to hear what extension the call was parked on. It seems like the polycom is hanging up before asterisk is able to

When a caller calls my google voice phone number, I must answer, wait and press one to accept. Sometimes even that does not work. I have tried a few different things to get asterisk to place the call in an answered state and send the DTMF 1 with the Dial macro. I found Malcom Davenports wiki page regarding Google calling which has been very helpful in troubleshooting the issue.

I've had my * setup installed with an X100P card for a couple of weeks and it's great fun! I'm even giving a demo to the local Linux group in a couple of days. But I have a snag. I have the X100P on a shared line, and configured to wait for 20 seconds before answering and doing the auto-attendant/voicemail dance. My problem is I can't find an application command to cancel the

Hello all, I have been posting some questions about this problems that I cannot yet solve, but I think I have a better diagostic, so maybe someone can give me a clue why it is happenning. I have Asterisk + AMP configured as a PBX with a Customer Center Queue with 4 agents that login/logout dinamically. If there are no agents, queue timesout and gets derived to another queue that somebody

I want to be able to pass any number (variable length) to a context and then forward that to another asterisk server for processing by that servers dial plan.? I have the two talking IAX2 so that part is done. I can also dial a number from the sending to the server asterisk. The problem is I don't want to have to create (duplicate) dial plans at originating Asterisk to equal those at the