Displaying 20 results from an estimated 800 matches similar to: "Install app_rxfax and app_txfax in 1.4with Lenny"
2008 Dec 17
2
Install app_rxfax and app_txfax in 1.4 with Lenny
Hi,
I've read README file in agx-ast-addons-1.4.17.5.tar.bz2
It says "Install libTiff >=3.8 and <4.0"
Should you really use this agx-ast-addons to get app_rxfax and app-_txfax
running with latest 1.4.22 ?
If positive, should you take this libtiff warning into account ?
If positive, where can you find such libtiff version as Debian repository (I
didn't check alternate
2008 Dec 22
2
Install app_rxfax and app_txfax in 1.4withLenny
...described in the README file ;).
SpanDSP - 0.0.4 pre 16
LibTiff - >= 3.8 but <4.0
I had to trawl around for the right SpanDSP - but I can e-mail a copy to whomever wants one (drop me a personal e-mail and I'll attach it by return)
HTH
Andy
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
2009 Sep 22
5
New Xorcom FXS USB Bank is not loading firmware
Hi,
I just got a Xorcom Astribank with 8 FXS but it does not work. So I
tried resetting and loading the firmware. But loading just times out.
/usr/share/zaptel/xpp_fxloader usb
--------- FIRMWARE LOADING: (usb) [1 devices]
'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex
into /dev/bus/usb/002/003
2008 Jul 16
5
Digium PRI and Echo cancellation
Hello,
I would like to double check what Echo Cancellation my Digium Card uses.
I thought I bought the little more expensive card that integrates
EchoCancellation. How can I check?
root at sn1:~# zaptel_hardware
pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121
root at sn1:~# ztcfg -v
Zaptel Version: SVN-branch-1.4-r4309
Echo Canceller: MG2
Is MG2 the correct one that I am supposed
2009 Jul 21
1
externalIVR() and how to do actions
Hello,
I played with the externalIVR application. So far I am able to read
digits and play sound files. But how can I leave the application and
continue in the dialplan so that I can execute other actions like going
to voicemail, or ringing users etc....
Best regards,
Lo?c.
--
Lo?c DIDELOT
MIXvoip S.a.
Tel: +352 20 3333 20
Fax: +352 20 3333 90
ldidelot at mixvoip.com
http://www.mixvoip.com
2008 Nov 21
2
hint priority with 50 channels
Hi,
I noticed that my hint priority stops working when I add to many
extensions/channels. It looks like everything exceeding 80 characters is
discarded.
By stop working I mean the status is and stays "Unavailable".
This works
exten => *1,hint,SIP/loicvoip1_1&IAX2/loicvoip1_1&SIP/loicvoip1_1_a1
This does not work:
exten =>
2009 Mar 13
1
AGX Asterisk Addon - Can't find app_fax.c withspandsp-0.0.4
You now need to compile and install SpanDSP-0.0.6pre3 at least (AGX has been changed).
After you've done that - try AGX again.
HTH
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier
Sent: 11 March 2009 06:16
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users]
2008 Dec 30
5
Xorcom BRI state NOTOPEN
Hello,
I recently got a problem I have never seen during my previous
installations.
I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux
and asterisk 1.4.22. Everything works fine but after some time zap
channels disappear in asterisk.
root at pbx1:~# cat /proc/zaptel/*
Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN
1 XPP_BRI_TE/00/00/0 Clear
2008 Jan 23
0
app_txfax
Hello,
I'm setting up Asterisk to send outgoing faxes over a PRI line. I
installed app_txfax and its prerequisites and astfax to submit email
messages to Asterisk. This all seems to work fine, but I get some
error messages in my logs I don't understand. Whenever I send a fax
it goes through fine, but I get these messages in the logs:
[Jan 17 11:21:07] WARNING[2413] chan_zap.c:
2008 Jan 08
3
app_rxfax.c and app_txxfax.c where?
Hi All,
Where can I find copies of the app_rxfax.c, app_txfax.c and
apps_Makefile.patch. They don't seem to be located at soft-switch.org
anymore.
I am currently trying to compile Asterisk 1.2.26.1 and need the fax
components.
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2008 Dec 18
3
Asterisk AGX addons compile issues
Has anyone seen this before, and know what is happening?
USER at HOST:~/asterisk/agx-ast-addons# ./build.sh
-- Configuring done
-- Generating done
-- Build files have been written to: /root/asterisk/agx-ast-addons
[ 11%] Building C object CMakeFiles/app_devstate.dir/app_devstate.o
Linking C shared module dist/app_devstate.so
[ 11%] Built target app_devstate
[ 22%] Building C object
2008 Apr 04
1
rxfax crashes Asterisk (segmentation fault)
Hi,
I am using spandsp-0.0.4, tiff-3.8.2, and agx-ags-addon with Asterisk
1.4.18.
Everytime rxfax executes, Asterisk crashes:
-- Executing [fax at phones:1] Set("Zap/2-1",
"FAXFILE=/var/spool/asterisk-fax/1207322398.0.tif") in new stack
-- Executing [fax at phones:2] RxFAX("Zap/2-1",
"/var/spool/asterisk-fax/1207322398.0.tif") in new st ack
[Apr 4
2009 Feb 03
1
app_rxfax.c: Channel T30 DONE < 0 -- incommplete fax reception.
Hi, all. I'm getting a lot of
[Feb 3 13:56:36] WARNING[3721]
/usr/src/asterisk/spandsp/agx-ast-addons/app_rxfax.c: Channel T30 DONE <
0.
in my log file, and incomplete fax reception. Any idea what might be
going on? I've googled a fair bit, but haven't seen anything leap out at
me.
Thanks,
-Ken
2007 May 04
3
app_txfax, app_rxfax
Hello,
I'm trying to compile asterisk from source (1.2.18). Faxing is fairly
critical for us, so in the past we've used spandsps app_rxfax and
app_txfax to support faxing in asterisk. Unfortunately I can't find
these applications on soft-switch.org anymore and even so I have a
feeling they wouldn't patch correctly into 1.2.18.
Does anyone know how to best handle faxing in
2009 Jan 07
1
app_rxfax and app_txfax with Ubuntu?
Hi, all. I just tried to fire up app_txfax and app_rxfax, only to find
that I can't seem to compile them. The problem appears to be that my
libtiff library is wrong. Only problem is that, according to the README,
I need "libtiff >=3.8 and <4.0", which is all well and good... except that
there is no 3.x libtiff anywhere in the Ubuntu repository (that I can
find, at any rate).
2009 Aug 28
1
PRI worked fine for months, nowit stopps working after 2-3 hours
Hello,
I wanted to relaunch my problem with a quite precise and small question.
Could the command "lsusb" affect interrupts when executing it regularly
(cron) and if the zaptel pci card is sharing an interrupt with a usb
bus?
I have a Digium PRI card and a few Xorcom USB Devices. The Digium card
seems to share the IRQ with some USB bus.
cat /proc/interrupts
CPU0 CPU1
2006 Jan 12
1
R: app_rxfax.so and app_txfax.so
I have to re-compile also app_rxfax.so and app_txfax.so or just spandsp ?
Thanks
Giordano
________________________________
Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Colin Anderson
Inviato: gioved? 12 gennaio 2006 17.20
A: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Oggetto: RE: [Asterisk-Users]
2009 Feb 26
1
Can't build today's AGX Asterisk Addon with spandsp0.0.6pre3 or 4
Hi,
With 0.0.6pre3:
# ./build.sh
CMake Warning (dev) in CMakeLists.txt:
No cmake_minimum_required command is present. A line of code such as
cmake_minimum_required(VERSION 2.6)
should be added at the top of the file. The version specified may be
lower
if you wish to support older CMake versions for this project. For more
information run "cmake --help-policy CMP0000".
2006 Jan 12
6
app_rxfax.so and app_txfax.so
Hi,
I just installed spandsp 0.0.3pre6 with libtiff 3.7.1 and evrythinghs is
ok. I recompiled asterisk and run ldocnfig, but whrn I start asterisk I
get this error:
[app_rxfax.so]Jan 12 16:40:42 WARNING[1569]: loader.c:258
ast_load_resource: /usr/lib/asterisk/modules/app_rxfax.so: undefined
symbol: fax_set_phase_d_handler
Jan 12 16:40:42 WARNING[1569]: loader.c:440 load_modules: Loading
2010 Mar 25
2
Attended transfer and callerID updates forSiemens Openstage phones
Hello,
I am testing the Openstage phones from Siemens but I can not find a
solution on how to update the caller-id after a successful attended
transfer. Of course, I mean an attended transfer by using the phones
functionality, not something defined in asterisks features.conf.
Any idea on how to achieve this, or any technical document from Siemens
on on how this is support to work would help.