similar to: Digium Card Noice issue

Hello, I'm trying to install CentOS 6.0 64bit on a HP ProLiant ML110 G7 with a HP Smart Array B110i SATA RAID Controller. One logical drive (RAID 1+0) on the RAID Controller is already build. CentOS Installation can't find the logical Drive, but it shows me the zwo physical drives (sda+sdb). After searching the web, I found following hints:

Hi there Just a quick post to ask you guys if you've had any bad (even good) experiences using current model HP or Dell servers ?? specifically the HP proliant ML110 and the Dell Poweredge 1800 SATA, (but I will welcome your recommendations on any current Models) . I will be rolling out some small to medium systems with a max 100 Sip extensions and 60 outbound (2 x e1) for the larger rollouts

I have just purchased an HP ProLiant HP ML110 G5 server and install ed CentOS 5.2 x86_64 on it. It has the following spec: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz 4GB ECC memory 4 x 250GB SATA hard disks running at 1.5GB/s Onboard RAID controller is enabled but at the moment I have used mdadm to configure the array. RAID bus controller: Intel Corporation 82801 SATA RAID Controller For a simple

Hi! I have install Centos 5.5 on HP ProLiant ML110 G6 with RAID-1 hardware active. (00:1f.2 RAID bus controller: Intel Corporation 5 Series/3400 Series Chipset SATA RAID Controller (rev 05)) I have follow this suggest:

Dear CentOSMailing List. We have a problem with Linux CentOS and Websense Enterpise Vers. 611., I would Like about to it, anyone was experience Installing CentOs and Websense Enterprise with Integration Squid Proxy ?. The following is my Installation Summary: LINUX KERNEL: Linux proxy 2.6.9-34.ELsmp #1 SMP Wed Mar 8 00:27:03 CST 2006 i686 i686 i386 GNU/Linux Linux version

I am running Asterisk 1.16.2.13, dahdi 2.4.0 and libpri 1.4.11.4 on an HP ML110 G6 using Ubuntu Linux 10.04 LTS. I have two Digium TE121 single T1 port cards and a Digium AEX800 8-port FXS card. All PCI Express cards. Co-workers are hearing hissing sounds on some calls, and I am getting IRQ errors when running "dahdi show status". I see that sharing IRQs for Digium cards isn't

Hello, Please CC replies I'm not subscribed. Performance with samba and only samba degrades terribly when we use the bonding driver to aggregate two ethernet cards. Instead of a steady file copy it seems to go in spurts. If I pull out one of the network cables (doesn't matter which) performance resumes to full speed. I can pull the cable in the middle of a transfer and it will go

Hi, Suppose I have a compiz key-binding (let's say Ctrl and +) that performs a particular action (let's say maximization) and the current active application (say xterm) also does something with the same key-binding (zoom in xterm) - compiz handles the event and does not pass it on to the application. Is this desired behavior? Is the behavior configurable? Shouldn't compiz handle it

Hi, We have on an old Dell 2850 with 4 SCSI drives, where we put a Hardware RAID5 on 3 disks and left 1 as spare. I dont remember exactly, but the RAID was setup in the BIOS, and when installing CentOS6, I just saw "1 drive". If it was software RAID, disk failure could be seen in /proc/mdastat, and I could simulate failure with mdadm. As far as it is hardware ATM, how, at least, to

Have Centos 5.3 installed in a HP ML110 server. After cloning disk using Clonezilla, if I issue a shutdown -h now, or any other command to shut down the server (i.e. init 0 or poweroff), instead of shutting down the server reboots. I googled but could't find any answer. ?Does anybody has a clue about why this is happening? -- Enrique Verdes <EVerdes at conatel.com.uy> Depto. de

i have been using the asterisk for some three weeks. Previously i was using the softphone iax-phone and now i have to shift to the sip phone xlite. The problem is that there's always unbearable noice in sip to sip calls. Is there any way to get rid of this???? Kindest MM Luqman -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi I use acts_as_ferret on an app that is in Danish and English. In Danish english words like "and" and "under" has meaning. Is it possible to make ferret search for these words? As it is now a seach for "under" returns nothing even-though I know the word is present in the index. Cheers Mattias

Hi to All, I dont know much about PCI express slots in newer Servers, my doubt is if the Digium and Sangoma PCI express cards, are compatible with the x8 PCI express slots that come in the HP Proliant ML150 G5 server. Thanks in advance. Ricardo -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

I would like to run FreeBSD 7 on a HP ML110 G5. I understand from past posts to this list that the ML110 series is FreeBSD friendly, but what about RAID 1 using the on-board SATA controller? Will this work and how do you set this up? Regards Tom Munro Glass

Hello, I`ve got a problem which I can`t deal with. I own 2 cards - TDM2400P and TE410P. I`ve put them into a HP Proliant DL380 G4 server, compiled the drivers according to the manual. Unfortunetly there are both cards channels are configured in zaptel.conf file the first module (in this file) sends an error. For configuration: span = 1, 1, 0, ccs, hdb3, crc4 fxsks = 21-24 bchan = 25-39,

hi folks. i have a Digium TE220 PCI-E 2 port T1/E1 controller installed in an IBM x3400 server. i load the wct4xxp driver seems ok. but when i execute "ztcfg -vvv" command. the kernel panic. i tried zaptel 1.2.21 & 22. they have the same result. following is my zaptel.conf: loadzone=cn defaultzone=cn span=1,1,0,ccs,hdb3 span=2,0,0,esf,b8zs bchan=1-15 dchan=16 bchan=17-31

Hi, probably just nothing to worry about, but I get the following warnings when building 1.1.7 on OpenBSD 4.4 on i386. If I remove the --with-bsdauth config option, they all disappear. I won't use it anyway, but maybe there are others. $ dmesg OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R)

What is the minimum version required for Compiz to run? Is it OpenGL 1.5 or OpenGL 2.0? -Bipin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.freedesktop.org/archives/compiz/attachments/20090126/985c425a/attachment.htm

How I can set up CentOS 5 on it if it don't see the drives. -- Juan Pablo De Mola Rodr?guez